MMBTH10 NPN HIGH FREQUENCY TRANSISTOR This device is designed for VHF/UHF amplifier applications and high output VHF oscillators. 3 COLLECTOR 1 BASE SPECIFICATION FEATURES Guaranteed Minimum Current Gain-Bandwidth Product of 650 MHz Collector Currents up to 50mA 2 EMITTER Industry Standard SOT-23 Package 1 2 APPLICATIONS 3 Low Noise VHF/UHF Amplifiers and Mixers SOT-23 Low Frequency Drift, High Output Oscillators MAXIMUM RATINGS TJ = 25°C Symbol Value Units Collector-Emitter Voltage V CE0 25 V Collector-Base Voltage V CB0 30 V Emitter-Base Voltage V EB0 3.0 V Collector Current - Continuous (Note 1) IC 50 mA Power Dissipation (Note 1) PD 225 mW Operating Temperature Range TJ -55 to 150 °C Storage Temperature Range Tstg -55 to 150 °C Symbol Value Units R th JA 556 °C/W Rating THERMAL CHARACTERISTICS CHARACTERISTIC Thermal Resistance - Junction to Ambient (Note 1) Note 1: Device mounted on FR-5 board 1.0 x 0.75 x 0.062 in. with recommended minimum pad layout 4/18/2006 Page 1 www.panjit.com MMBTH10 ELECTRICAL CHARACTERISTICS (TJ = 25°C, unless otherwise noted) OFF CHARACTERISTICS Parameter Symbol Conditions Min Typical Max Units Collector-Emitter Breakdown Voltage V(BR)CE0 I C = 1.0 mA, IB = 0 25 - - V Collector-Base Breakdown Voltage V(BR)CB0 I C = 100 uA, IE = 0 30 - - V Emitter-Base Breakdown Voltage V(BR)EB0 I E = 10 uA, IC = 0 3.0 - - V Collector Cutoff Current I CB0 VCB = 25 V, E I =0 - - 100 nA Emitter Cutoff Current I EB0 VEB = 2.0 V, C I =0 - - 100 nA ON CHARACTERISTICS Parameter Symbol Conditions Min Typical Max Units h FE I C = 4.0 mA, VCE = 10 V 60 180 - - VCE(sat) I C = 4.0 mA, IB = 0.4 mA - - 0.5 V VBE I C = 4.0 mA, VCE = 10 V - - 0.95 V Symbol Conditions Min Typical Max Units fT I C = 4.0 mA, VCE = 10 V f = 1.0 MHz VCB = 10 V, E I =0 f = 1.0 MHz VCB = 10 V, E I =0 f = 1.0 MHz I C = 4.0 mA, VCB = 10 V f = 31.8 MHz 650 - - MHz - - 0.7 pF - - 0.65 pF - - 9.0 ps DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage SMALL-SIGNAL CHARACTERISTICS Parameter Current Gain - Bandwidth Product Collector-Base Capacitance Ccb Common-Base Feedback Capacitance C rb Collector-Base Time Constant rb'C c 4/18/2006 Page 2 www.panjit.com MMBTH10 PACKAGE LAYOUT AND SUGGESTED PAD DIMENSIONS ORDERING INFORMATION MMBTH10-T/R7 - 7 inch reel, 3K units per reel MMBTH10-T/R13 - 13 inch reel, 12K units per reel Copyright PanJit International, Inc 2005 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 4/18/2006 Page 3 www.panjit.com