MJF44H11 (NPN), MJF45H11 (PNP) Preferred Devices Complementary Power Transistors For Isolated Package Applications http://onsemi.com Complementary power transistors are for general purpose power amplification and switching such as output or driver stages in applications such as switching regulators, converters and power amplifiers. Features SILICON POWER TRANSISTORS 10 AMPERES 80 VOLTS, 36 WATTS • Low Collector−Emitter Saturation Voltage − • • • VCE(sat) = 1.0 V (Max) @ 8.0 A Fast Switching Speeds Complementary Pairs Simplifies Designs Pb−Free Packages are Available* MAXIMUM RATINGS 1 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Rating Collector−Emitter Voltage Emitter−Base Voltage Collector Current − Continuous − Peak Symbol Value Unit VCEO 80 Vdc VEB 5 Vdc IC 10 20 Adc 36 1.67 W W/°C 2.0 0.016 W W/°C −55 to 150 °C Total Power Dissipation @ TC = 25°C Derate above 25°C PD Total Power Dissipation @ TA = 25°C Derate above 25°C PD Operating and Storage Junction Temperature Range TJ, Tstg THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction−to−Case Characteristic RqJC 3.5 °C/W Thermal Resistance, Junction−to−Ambient RqJA 62.5 °C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 April, 2006 − Rev. 4 1 2 ISOLATED TO−220 CASE 221D STYLE 2 3 MARKING DIAGRAM F4xH11G AYWW F4xH11 = Specific Device Code x = 4 or 5 G = Pb−Free Package A = Assembly Location Y = Year WW = Work Week ORDERING INFORMATION Package Shipping MJF44H11 Device TO−220 FULLPACK 50 Units/Rail MJF44H11G TO−220 FULLPACK (Pb−Free) 50 Units/Rail MJF45H11 TO−220 FULLPACK 50 Units/Rail MJF45H11G TO−220 FULLPACK (Pb−Free) 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MJF44H11/D MJF44H11 (NPN), MJF45H11 (PNP) ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector−Emitter Sustaining Voltage (IC = 30 mA, IB = 0) VCEO(sus) 80 − − Vdc Collector Cutoff Current (VCE = Rated VCEO, VBE = 0) ICES − − 1.0 mA Emitter Cutoff Current (VEB = 5 Vdc) IEBO − − 10 mA Collector−Emitter Saturation Voltage (IC = 8 Adc, IB = 0.4 Adc) VCE(sat) − − 1.0 Vdc Base−Emitter Saturation Voltage (IC = 8 Adc, IB = 0.8 Adc) VBE(sat) − − 1.5 Vdc DC Current Gain (VCE = 1 Vdc, IC = 2 Adc) hFE 60 − − − 40 − − − − 130 230 − − − − 50 40 − − − − 300 135 − − − − 500 500 − − − − 140 100 − − OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (VCE = 1 Vdc, IC = 4 Adc) DYNAMIC CHARACTERISTICS Collector Capacitance (VCB = 10 Vdc, ftest = 1 MHz) Ccb MJF44H11 MJF45H11 Gain Bandwidth Product (IC = 0.5 Adc, VCE = 10 Vdc, f = 20 MHz) pF fT MJF44H11 MJF45H11 MHz SWITCHING TIMES Delay and Rise Times (IC = 5 Adc, IB1 = 0.5 Adc) MJF44H11 MJF45H11 Storage Time (IC = 5 Adc, IB1 = IB2 = 0.5 Adc) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) ns 0.1 0.1 0.02 0.01 SINGLE PULSE 0.02 0.05 0.1 P(pk) ZqJC(t) = r(t) RqJC RqJC = 1.56°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) − TC = P(pk) ZqJC(t) 0.05 0.03 0.01 0.01 tf MJF44H11 MJF45H11 0.2 0.2 0.02 ns D = 0.5 0.3 0.07 0.05 ns ts MJF44H11 MJF45H11 Fall Time (IC = 5 Adc, IB1 = IB2 = 0.5 Adc) 1.0 0.7 0.5 td + tr 0.2 0.5 1.0 2.0 t, TIME (ms) 5.0 10 Figure 1. Thermal Response http://onsemi.com 2 20 t1 t2 DUTY CYCLE, D = t1/t2 50 100 200 500 1.0 k MJF44H11 (NPN), MJF45H11 (PNP) There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC − VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 2 is based on TJ(pk) = 150°C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) v 150°C. TJ(pk) may be calculated from the data in Figure 1. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 50 30 20 1.0 ms 100 ms 10 5.0 3.0 2.0 1.0 0.5 0.3 0.2 0.1 1.0 10 ms TC ≤ 70° C DUTY CYCLE ≤ 50% dc 1.0 ms MJF44H11/MJF45H11 5.0 7.0 10 2.0 3.0 20 30 50 70 100 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 2. Maximum Rated Forward Bias Safe Operating Area PD, POWER DISSIPATION (WATTS) IC, COLLECTOR CURRENT (AMPS) 100 TA TC 3.0 60 2.0 40 TA 1.0 20 0 0 TC 0 20 40 60 80 100 120 T, TEMPERATURE (°C) Figure 3. Power Derating http://onsemi.com 3 140 160 MJF44H11 (NPN), MJF45H11 (PNP) 1000 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 1000 VCE = 4 V 100 VCE = 1 V TJ = 25°C 10 0.1 1 1 10 IC, COLLECTOR CURRENT (AMPS) Figure 4. MJF44H11 DC Current Gain Figure 5. MJF45H11 DC Current Gain 1000 hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN TJ = 25°C IC, COLLECTOR CURRENT (AMPS) TJ = 125°C 25°C 100 −40 °C VCE = 1 V 0.1 1 VCE = 1 V 0.1 1 10 Figure 6. MJF44H11 Current Gain versus Temperature Figure 7. MJF45H11 Current Gain versus Temperature SATURATION VOLTAGE (VOLTS) 1.2 VBE(sat) 0.6 0 0.1 100 IC, COLLECTOR CURRENT (AMPS) 0.8 0.2 25°C −40 °C IC, COLLECTOR CURRENT (AMPS) 1 0.4 TJ = 125°C 10 10 1.2 SATURATION VOLTAGE (VOLTS) 1V 10 0.1 10 1000 10 VCE = 4 V 100 IC/IB = 10 TJ = 25°C VCE(sat) 1 IC, COLLECTOR CURRENT (AMPS) 1 0.8 0.6 0.4 IC/IB = 10 TJ = 25°C VCE(sat) 0.2 0 0.1 10 VBE(sat) Figure 8. MJF44H11 On−Voltages 1 IC, COLLECTOR CURRENT (AMPS) Figure 9. MJF45H11 On−Voltages http://onsemi.com 4 10 MJF44H11 (NPN), MJF45H11 (PNP) PACKAGE DIMENSIONS TO−220 FULLPAK CASE 221D−03 ISSUE G −T− −B− F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH 3. 221D−01 THRU 221D−02 OBSOLETE, NEW STANDARD 221D−03. SEATING PLANE C S Q U DIM A B C D F G H J K L N Q R S U A 1 2 3 H −Y− K G N L D J R 3 PL 0.25 (0.010) M B M INCHES MIN MAX 0.625 0.635 0.408 0.418 0.180 0.190 0.026 0.031 0.116 0.119 0.100 BSC 0.125 0.135 0.018 0.025 0.530 0.540 0.048 0.053 0.200 BSC 0.124 0.128 0.099 0.103 0.101 0.113 0.238 0.258 MILLIMETERS MIN MAX 15.88 16.12 10.37 10.63 4.57 4.83 0.65 0.78 2.95 3.02 2.54 BSC 3.18 3.43 0.45 0.63 13.47 13.73 1.23 1.36 5.08 BSC 3.15 3.25 2.51 2.62 2.57 2.87 6.06 6.56 STYLE 2: PIN 1. BASE 2. COLLECTOR 3. EMITTER Y ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MJF44H11/D