FAIRCHILD MCT5201M

MCT5201M, MCT5210M, MCT5211M
Low Input Current Phototransistor Optocouplers
Features
Description
■ High CTRCE(SAT) comparable to Darlingtons
The MCT52XXM series consists of a high-efficiency
AlGaAs, infrared emitting diode, coupled with an NPN
phototransistor in a six pin dual-in-line package.
■ CTR guaranteed 0°C to 70°C
■ High common mode transient rejection 5kV/µs
■ Data rates up to 150kbits/s (NRZ)
■ Underwriters Laboratory (UL) recognized,
file #E90700, volume 2
■ IEC60747-5-2 approved (ordering option V)
Applications
■ CMOS to CMOS/LSTTL logic isolation
The MCT52XXM is well suited for CMOS to LSTT/TTL
interfaces, offering 250% CTRCE(SAT) with 1mA of LED
input current. When an LED input current of 1.6mA is
supplied data rates to 20K bits/s are possible.
The MCT52XXM can easily interface LSTTL to LSTTL/
TTL, and with use of an external base to emitter resistor
data rates of 100K bits/s can be achieved.
■ LSTTL to CMOS/LSTTL logic isolation
■ RS-232 line receiver
■ Telephone ring detector
■ AC line voltage sensing
■ Switching power supply
Schematic
ANODE 1
6 BASE
6
1
CATHODE 2
5 COL
6
1
6
3
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
4 EMITTER
1
www.fairchildsemi.com
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
February 2008
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameters
Value
Units
TOTAL DEVICE
TSTG
Storage Temperature
-55 to +150
°C
TOPR
Operating Temperature
-40 to +100
°C
TSOL
Lead Solder Temperature
260 for 10 sec
°C
260
mW
3.5
mW/°C
50
mA
PD
Total Device Power Dissipation @ 25°C (LED plus detector)
Derate Linearly From 25°C
EMITTER
IF
Continuous Forward Current
VR
Reverse Input Voltage
6
V
Forward Current - Peak (1 µs pulse, 300 pps)
3.0
A
LED Power Dissipation
75
mW
Derate Linearly From 25°C
1.0
mW/°C
IC
Continuous Collector Current
150
mA
PD
Detector Power Dissipation
150
mW
2.0
mW/°C
IF(pk)
PD
DETECTOR
Derate Linearly from 25°C
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
2
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Absolute Maximum Ratings
Individual Component Characteristics
Symbol
Parameters
Test Conditions
Device
Min.
Typ.* Max. Units
EMITTER
VF
Input Forward Voltage
IF = 5mA
All
1.25
∆VF
∆TA
Forward Voltage Temp. Coefficient
IF = 2mA
All
-1.75
VR
Reverse Voltage
IR = 10µA
All
CJ
Junction Capacitance
VF = 0V, f = 1.0MHz
All
1.5
V
mV/°C
6
V
18
pF
DETECTOR
BVCEO
Collector-Emitter Breakdown Voltage IC = 1.0mA, IF = 0
All
30
100
V
BVCBO
Collector-Base Breakdown Voltage
IC = 10µA, IF = 0
All
30
120
V
BVEBO
Emitter-Base Breakdown Voltage
IE = 10µA, IF = 0
All
5
10
V
ICER
Collector-Emitter Dark Current
VCE = 10V, IF = 0,
RBE = 1MΩ
All
1
CCE
Capacitance, Collector to Emitter
VCE = 0, f = 1MHz
All
10
pF
CCB
Capacitance, Collector to Base
VCB = 0, f = 1MHz
All
80
pF
CEB
Capacitance, Emitter to Base
VEB = 0, f = 1MHz
All
15
pF
100
nA
Isolation Characteristics
Symbol
Characteristic
Test Conditions
Device
Min. Typ.* Max.
Units
VISO
Input-Output Isolation
Voltage(10)
f = 60Hz, t = 1 sec.
All
7500
Vac(peak)
RISO
Isolation Resistance(10)
VI-O = 500 VDC, TA = 25°C
All
1011
Ω
CISO
Isolation Capacitance
(9)
CMH
Common Mode Transient
VCM = 50 VP-P1, RL= 750Ω,
IF = 0
Rejection – Output HIGH
VCM = 50 VP-P , RL= 1KΩ,
IF = 0
Common Mode Transient
VCM = 50 VP-P1, RL = 750Ω,
IF =1.6mA
Rejection – Output LOW
VCM = 50 VP-P1, RL= 1KΩ,
IF = 5mA
CML
VI-O = 0, f = 1 MHz
All
0.4
MCT5210M/11M
5000
0.6
V/µs
pF
5000
V/µs
MCT5201M
MCT5210M/11M
MCT5201M
*All typical TA = 25°C
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
3
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Electrical Characteristics (TA = 25°C unless otherwise specified)
Transfer Characteristics
Symbol
Characteristics
Test Conditions
Device
Min. Typ.* Max. Units
DC CHARACTERISTICS
CTRCE(SAT) Saturated Current
Transfer Ratio(1)
(Collector to Emitter)
IF = 5mA, VCE = 0.4V
MCT5201M
120
IF = 3.0mA, VCE = 0.4V
MCT5210M
60
IF = 1.6mA, VCE = 0.4V
MCT5211M
100
MCT5210M
70
MCT5211M
150
IF = 1.0mA, VCE = 0.4V
CTR(CE)
75
Current Transfer Ratio IF = 3.0mA, VCE = 5.0V
(Collector to Emitter)(1) I = 1.6mA, V = 5.0V
F
CE
IF = 1.0mA, VCE = 5.0V
CTR(CB)
Current Transfer Ratio
Collector to Base(2)
Saturation Voltage
%
110
IF = 5mA, VCB = 4.3V
MCT5201M
0.28
IF = 3.0mA, VCE = 4.3V
MCT5210M
0.2
IF = 1.6mA, VCE = 4.3V
MCT5211M
0.3
IF = 1.0mA, VCE = 4.3V
VCE(SAT)
%
%
0.25
IF = 5mA, ICE = 6mA
MCT5201M
0.4
IF = 3.0mA, ICE = 1.8mA
MCT5210M
0.4
IF = 1.6mA, ICE = 1.6mA
MCT5211M
0.4
V
AC CHARACTERISTICS
TPHL
Propagation Delay
HIGH-to-LOW(3)
RL = 330 Ω, RBE = ∞
RL = 3.3 kΩ, RBE = 39kΩ
RL = 750 Ω, RBE = ∞
RL = 4.7 kΩ, RBE = 91kΩ
IF = 3.0mA,
VCC = 5.0V
MCT5210M
10
IF = 1.6mA,
VCC = 5.0V
MCT5211M
14
7
15
IF = 1.0mA,
RL = 1.5 kΩ, RBE = ∞
RL = 10 kΩ, RBE = 160kΩ VCC = 5.0V
TPLH
Propagation Delay
LOW-to-HIGH(4)
17
24
IF = 5mA
VCE = 0.4V, VCC = 5V,
RL = fig. 13, RBE = 330kΩ
MCT5201M
3
RL = 330 Ω, RBE = ∞
IF = 3.0mA,
VCC = 5.0V
MCT5210M
0.4
IF = 1.6mA,
VCC = 5.0V
MCT5211M
2.5
RL = 3.3 kΩ, RBE = 39kΩ
RL = 750 Ω, RBE = ∞
RL = 4.7 kΩ, RBE = 91kΩ
µs
30
µs
8
11
RL = 1.5 kΩ, RBE = ∞
7
IF = 1.0mA,
RL = 10 kΩ, RBE = 160kΩ VCC = 5.0V
16
IF = 5mA
VCE = 0.4V, VCC = 5V,
RL = fig. 13, RBE = 330kΩ
MCT5201M
12
13
td
Delay Time(5)
VCE = 0.4V, RBE = 330kΩ, IF = 5mA
RL = 1 kΩ, VCC = 5V
MCT5201M
1.1
15
µs
tr
Rise Time(6)
VCE = 0.4V, RBE = 330kΩ, IF = 5mA
RL = 1 kΩ, VCC = 5V
MCT5201M
2.5
20
µs
ts
Storage Time(7)
VCE = 0.4V, RBE = 330 kΩ, IF = 5mA
RL = 1 kΩ, VCC = 5V
MCT5201M
10
13
µs
tf
Fall Time(8)
VCE = 0.4V, RBE = 330 kΩ, IF = 5mA
RL = 1 kΩ, VCC = 5V
MCT5201M
16
30
µs
*All typicals at TA = 25°C
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
4
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Electrical Characteristics (Continued) (TA = 25°C unless otherwise specified)
2. The collector base Current Transfer Ratio (CTRCB) is defined as the transistor collector base photocurrent(ICB)
divided by the input LED current (IF) time 100%.
3. Referring to Figure 14 the TPHL propagation delay is measured from the 50% point of the rising edge of the data
input pulse to the 1.3V point on the falling edge of the output pulse.
4. Referring to Figure 14 the TPLH propagation delay is measured from the 50% point of the falling edge of data input
pulse to the 1.3V point on the rising edge of the output pulse.
5. Delay time (td) is measured from 50% of rising edge of LED current to 90% of Vo falling edge.
6. Rise time (tr) is measured from 90% to 10% of Vo falling edge.
7. Storage time (ts) is measured from 50% of falling edge of LED current to 10% of Vo rising edge.
8. Fall time (tf) is measured from 10% to 90% of Vo rising edge.
9. CISO is the capacitance between the input (pins 1, 2, 3 connected) and the output, (pin 4, 5, 6 connected).
10. Device considered a two terminal device: Pins 1, 2, and 3 shorted together, and pins 5, 6 and 7 are shorted
together.
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
5
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Notes:
1. DC Current Transfer Ratio (CTRCE) is defined as the transistor collector current (ICE) divided by the input LED
current (IF) x 100%, at a specified voltage between the collector and emitter (VCE).
NORMALIZED CURRENT TRANSFER RATIO
Fig. 1 LED Forward Voltage vs. Forward Current
1.8
1.6
1.4
TA = -40°C
1.2
1.0
0.8
0.1
NORMALIZED CURRENT TRANSFER RATIO
TA = 25°C
TA = 100°C
1
10
IF - LED FORWARD CURRENT (mA)
100
1.4
1.2
1.0
0.8
0.6
0.4
Normalized to:
IF = 5mA
VCE = 5V
TA = 25°C
0.2
0.0
0.1
1
10
IF - FORWARD CURRENT (mA)
Fig. 4 Normalized Collector vs.
Collector - Emitter Voltage
Fig. 3 Normalized CTR vs. Temperature
1.4
1.2
1.0
10
Normalized to:
IF = 5mA
VCE = 5V
TA = 25°C IF = 10mA
IF = 5mA
0.8
IF = 2mA
0.6
IF = 1mA
0.4
IF = 0.5mA
0.2
IF = 0.2mA
0.0
-40
NORMALIZED ICE - COLLECTOR
- EMITTER CURRENT
VF - FORWARD VOLTAGE (V)
2.0
Fig. 2 Normalized Current Transfer Ratio vs.
Forward Current
-20
-20
0
20
40
60
100
IF = 10 mA
1
IF = 5 mA
IF = 2 mA
0.1
IF = 1 mA
IF = 0.5 mA
0.01
IF = 0.2 mA
Normalized to:
IF = 5mA :
VCE = 5V
TA = 25°C
0.001
0.0001
0.1
120
1
Fig. 5 Normalized Collector Base Photocurrent
Ratio vs. Forward Current
Fig. 6 Normalized Collector Base Current vs. Temperature
10
NORMALIZED - COLLECTOR
BASE CURRENT
NORMALIZED ICB - COLLECTOR
BASE PHOTO CURRENT
100
10
1
0.1
0.01
0.1
10
VCE - COLLECTOR - EMITTER VOLTAGE (V)
TA - AMBIENT TEMPERATURE (°C)
Normalized to:
IF = 5mA
VCB = 4.3V
TA = 25°C
1
10
IF = 5 mA
1
IF = 2 mA
0.1
IF = 1 mA
IF = 0.5 mA
0.01 Normalized to:
IF = 0.2 mA
IF = 5mA
VCB = 4.3V
TA = 25°C
0.001
-60
100
-40
-20
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
IF - FORWARD CURRENT (mA)
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
IF = 10 mA
www.fairchildsemi.com
6
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Typical Performance Curves
Fig. 7 Collector-Emitter Dark Current vs.
Ambient Temperature
Fig. 8 Switching Time vs.
Ambient Temperature
30
IF = 0mA
VCE = 10V
SWITCHING TIME - t (µs)
ICEO - DARK CURRENT (nA)
10000
1000
100
10
1
25
20
tf
ts
10
5
0
10
20 30 40 50 60 70 80 90
TA - AMBIENT TEMPERATURE (°C)
0
-40
100
-20
0
40
60
80
100
120
20
SWITCHING TIME - t (µs)
IF = 10mA
Refer to Figure 13 for switching time circuit
VCC = 5V
RL = 1K
RBE = 100K
20
tf
tPLH
15
10
ts
5
tr
0
-40
-20
tPHL
0
20
16
IF = 5mA
VCC = 5V
RL = 1K
RBE = 330K
Refer to Figure 13 for switching time circuit
tf
12
tPLH
ts
8
4
tPHL
tr
td
40
td
60
80
100
0
-40
120
TA - AMBIENT TEMPERATURE (°C)
-20
0
20
40
60
80
100
120
TA - AMBIENT TEMPERATURE (°C)
Fig. 11 Switching Time vs.
Ambient Temperature
Fig. 12 Switching Time vs.
Base-Emitter Resistance
20
100
IF = 5mA
VCC = 5V
RL = 1K
RBE = 100K
Refer to Figure 13 for switching time circuit
SWITCHING TIME - t (µs)
16
20
td
Fig. 10 Switching Time vs.
Ambient Temperature
30
25
tPHL
TA - AMBIENT TEMPERATURE (°C)
Fig. 9 Switching Time vs.
Ambient Temperature
SWITCHING TIME - t (µs)
tPLH
15
tr
0.1
SWITCHING TIME - t (µs)
Refer to Figure 13 for switching time circuit
IF = 10mA
VCC = 5V
RL = 1K
RBE = 330K
12
tf
tPLH
8
ts
4
tr
tPHL
t PLH
I F = 1.6mA
R L = 4.7K
-20
0
20
40
60
80
100
ttPHL, I F = 1.6mA, RL = 4.7K
t PHL, I F = 3mA, RL = 3.3K
VCC = 5V
TA = 25°C
1
10
120
TA - AMBIENT TEMPERATURE (°C)
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
t PHL, I F = 1mA, RL = 10K
10
td
0
-40
t PLH, I F = 1mA, RL = 10K
t PLH
I F = 3mA
R L = 3.3K
100
1000
10000
BASE-EMITTER RESISTANCE - RBE (kΩ)
www.fairchildsemi.com
7
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Typical Performance Curves (Continued)
VCC = 5.0 V
VCC = 5.0 V
Pulse Gen
ZO = 50Ω
f = 10KHz
10% D.F.
Pulse Gen
ZO = 50Ω
f = 10KHz
10% D.F.
1K
VO
1K
4.7K
D1
IF monitor
VO
IF monitor
330K
100 Ω
D2
D3
330K
100 Ω
D4
tr, tf, td, ts
TEST CIRCUIT
tPHL, tPLH
TEST CIRCUIT
Figure 13.
INPUT
50%
(IF)
0
td
90%
OUTPUT
(VO)
90%
tPHL
tPLH
1.3 V
10%
1.3 V
10%
0
ts
tr
tf
Figure 14. Switching Circuit Waveforms
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
8
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Typical Electro-Optical Characteristics (TA = 25°C unless otherwise specified
Through Hole
Surface Mount
0.350 (8.89)
0.320 (8.13)
0.350 (8.89)
0.320 (8.13)
PIN 1 ID
Pin 1 ID
0.070 (1.77)
0.040 (1.02)
0.260 (6.60)
0.240 (6.10)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.012 (0.30)
0.008 (0.20)
0.025 (0.63)
0.020 (0.51)
0.020 (0.50)
0.016 (0.41)
15°
0.100 (2.54)
0.390 (9.90)
0.332 (8.43)
0.070 (1.77)
0.040 (1.02)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
SEATING PLANE
SEATING PLANE
0.260 (6.60)
0.240 (6.10)
0.100 [2.54]
0.035 (0.88)
0.006 (0.16)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
0.4" Lead Spacing
Recommended Pad Layout for
Surface Mount Leadform
0.350 (8.89)
0.320 (8.13)
0.070 (1.78)
PIN 1 ID
0.060 (1.52)
0.260 (6.60)
0.240 (6.10)
0.425 (10.79)
0.100 (2.54)
0.305 (7.75)
SEATING PLANE
0.070 (1.77)
0.040 (1.02)
0.030 (0.76)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.020 (0.50)
0.016 (0.41)
0.100 [2.54]
0.012 (0.30)
0.008 (0.21)
0.425 (10.80)
0.400 (10.16)
Note:
All dimensions are in inches (millimeters)
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
9
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Package Dimensions
Option
Order Entry Identifier
(Example)
No suffix
MCT5201M
S
MCT5201SM
SR2
MCT5201SR2M
T
MCT5201TM
0.4" Lead Spacing
V
MCT5201VM
IEC60747-5-2
TV
MCT5201TVM
IEC60747-5-2, 0.4" Lead Spacing
SV
MCT5201SVM
IEC60747-5-2, Surface Mount
SR2V
MCT5201SR2VM
Description
Standard Through Hole Device (50 units per tube)
Surface Mount Lead Bend
Surface Mount; Tape and Reel (1,000 units per reel)
IEC60747-5-2, Surface Mount, Tape and Reel (1,000 units per reel)
Marking Information
1
V
3
MCT5201
2
X YY Q
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code, e.g., ‘7’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
*Note – Parts that do not have the ‘V’ option (see definition 3 above) that are marked with
date code ‘325’ or earlier are marked in portrait format.
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
10
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Ordering Information
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05
Ø1.5 MIN
4.0 ± 0.1
0.30 ± 0.05
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1
9.1 ± 0.20
Ø1.5 ± 0.1/-0
10.1 ± 0.20
0.1 MAX
24.0 ± 0.3
User Direction of Feed
Reflow Profile
300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
°C
Time above
183°C = 90 Sec
160
140
120
1.822°C/Sec Ramp up rate
100
80
60
40
33 Sec
20
0
0
60
120
180
270
360
Time (s)
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
11
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
Carrier Tape Specification
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EZSWITCH™ *
™
PDP-SPM™
Power220®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FPS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter® *
®
SupreMOS™
SyncFET™
®
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
* EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
the design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I33
©1983 Fairchild Semiconductor Corporation
MCT5201M, MCT5210M, MCT5211M Rev. 1.1.0
www.fairchildsemi.com
12
MCT5201M, MCT5210M, MCT5211M — Low Input Current Phototransistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global
subsidiaries, and is not intended to be an exhaustive list of all such trademarks.