Revised February 2000 DM74ALS174 • DM74ALS175 Hex/Quad D-Type Flip-Flops with Clear General Description Features These positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. Both have an asynchronous clear input, and the quad (DM74ALS175) version features complementary outputs from each flip-flop. ■ Advanced oxide-isolated ion-implanted Schottky TTL process Information at the D inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input is at either the HIGH or LOW level, the D input signal has no effect at the output. ■ Switching performance guaranteed over full temperature and VCC supply range ■ Pin and functional compatible with LS family counterpart ■ Typical clock frequency maximum is 80 MHz Ordering Code: Ordering Code Package Number Package Description DM74ALS174M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74ALS174SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74ALS174N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide DM74ALS175M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74ALS175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74ALS175N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagrams DM74ALS174 © 2000 Fairchild Semiconductor Corporation DM74ALS175 DS006112 www.fairchildsemi.com DM74ALS174 • DM74ALS175 Hex/Quad D-Type Flip-Flops with Clear September 1986 DM74ALS174 • DM74ALS175 Function Table Inputs Outputs Clear Clock D Q Q (Note 1) L X X L H H ↑ H H L H ↑ L L H H L X Q0 Q0 H = HIGH Level (steady state) L = LOW Level (steady state) X = Don’t Care ↑ = Transition from LOW-to-HIGH Level Q0 = the level of Q before the indicated steady-state input conditions were established Note 1: applies to DM74ALS175 only Logic Diagrams DM74ALS174 www.fairchildsemi.com DM74ALS175 2 Supply Voltage 7V Input Voltage 7V 0°C to +70°C Operating Free Air Temperature Range Note 2: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. −65°C to +150°C Storage Temperature Range Typical θJA N Package 77.9°C/W M Package 107.3°C/W Recommended Operating Conditions Symbol Parameter Min Nom Max Units 4.5 5 5.5 V LOW Level Input Voltage 0.8 V VCC Supply Voltage VIH HIGH Level Input Voltage VIL 2 V IOH HIGH Level Output Current −0.4 mA IOL LOW Level Output Current 8 mA tW Pulse Width Clock 10 HIGH or LOW tSETUP Setup Time (Note 3) Clear LOW 10 Data Input 10↑ Clear ns ns 6↑ Inactive State tHOLD Data Hold Time (Note 3) 0↑ fCLOCK Clock Frequency 0 50 MHz ns TA Free Air Operating Temperature 0 70 °C Note 3: The symbol ↑ indicates that the rising edge of the clock is used as reference. 3 www.fairchildsemi.com DM74ALS174 • DM74ALS175 Absolute Maximum Ratings(Note 2) DM74ALS174 • DM74ALS175 Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C. Symbol Parameter Conditions VIK Input Clamp Voltage VCC = 4.5V, IIN = −18 mA VOH HIGH Level IOH = −400 µA Output Voltage VCC = 4.5V to 5.5V VOL LOW Level Output Voltage II Input Current at Max Input Voltage Min Typ VCC − 2 VCC = 4.5V IOL = 8 mA Max Units −1.5 V VCC − 1.6 V 0.35 VCC = 5.5V, VIN = 7V 0.5 V 0.1 mA IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 µA IIL LOW Level Input Current VCC = 5.5V, VIN = 0.4V −0.1 mA IO Output Drive Current VCC = 5.5V, VO = 2.25V −112 mA ICC Supply Current VCC = 5.5V −30 Clock = 4.5V DM74ALS174 11 19 DM74ALS175 8 14 mA Clear = GND D Input = GND Switching Characteristics over recommended operating free air temperature range Symbol Parameter Conditions fMAX Maximum Clock Frequency RL = 500Ω tPLH Propagation Delay Time CL = 50 pF LOW-to-HIGH Level VCC = 4.5V to 5.5V Min Max 50 Units MHz 5 18 ns 8 23 ns 3 15 ns 5 17 ns Output From Clear (175 Only) tPHL Propagation Delay Time HIGH-to-LOW Level Output From Clear tPLH Propagation Delay Time LOW-to-HIGH Level Output From Clock tPHL Propagation Delay Time HIGH-to-LOW Level Output From Clock www.fairchildsemi.com 4 DM74ALS174 • DM74ALS175 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A 5 www.fairchildsemi.com DM74ALS174 • DM74ALS175 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D www.fairchildsemi.com 6 DM74ALS174 • DM74ALS175 Hex/Quad D-Type Flip-Flops with Clear Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com