SLOS065D − MARCH 1991 − REVISED APRIL 2002 D 2.5-V Virtual Ground for 5-V/GND Analog D D D Excellent Regulation Characteristics Systems High Output-Current Capability Sink or Source . . . 20 mA Typ Micropower Operation . . . 170 µA Typ − Output Regulation −45 µV Typ at IO = 0 to −10 mA +15 µV Typ at IO = 0 to + 10 mA − Input Regulation = 1.5 µV/V Typ Low-Impedance Output . . . 0.0075 Ω Typ Macromodel Included D D description OUTPUT REGULATION 100 In signal-conditioning applications using a single power source, a reference voltage is required for termination of all signal grounds. To accomplish this, engineers have typically used solutions consisting of resistors, capacitors, operational amplifiers, and voltage references. Texas Instruments has eliminated all of those components with one easy-to-use 3-terminal device. That device is the TLE2425 precision virtual ground. VI = 5 V ∆VV) O − Output Voltage Change − µV 80 Use of the TLE2425 over other typical circuit solutions gives the designer increased dynamic signal range, improved signal-to-noise ratio, lower distortion, improved signal accuracy, and easier interfacing to ADCs and DACs. These benefits are the result of combining a precision micropower voltage reference and a high-performance precision operational amplifier in a single silicon chip. It is the precision and performance of these two circuit functions together that yield such dramatic system-level performance. 60 TA = − 40°C 40 TA = 0°C TA = − 55°C 20 0 TA = 125°C TA = 25°C TA = 25°C −20 −40 TA = 125°C −60 TA = − 55°C −80 −100 −10 −8 −6 −4 −2 0 2 4 6 IO − Output Current − mA 8 10 The TLE2425 improves input regulation as well as output regulation and, in addition, reduces output impedance and power dissipation in a majority of virtual-ground-generation circuits. Both input regulation and load regulation exceed 12 bits of accuracy on a single 5-V system. Signal-conditioning front ends of data acquisition systems that push 12 bits and beyond can use the TLE2425 to eliminate a major source of system error. AVAILABLE OPTIONS TA SMALL OUTLINE (D) PLASTIC TO-226AA (LP) 0°C to 70°C TLE2425CD TLE2425CD −40°C to 85°C TLE2425ID TLE2425ID −55°C to 125°C TLE2425MD — † The D package is available taped and reeled. Add R suffix to the device type (e.g., TLE2425CDR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated !"# $% $ ! ! & ' $$ ()% $ !* $ #) #$ * ## !% WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 1 SLOS065D − MARCH 1991 − REVISED APRIL 2002 D, OR JG PACKAGE (TOP VIEW) OUT COMMON IN NC 1 8 2 7 3 6 4 5 LP PACKAGE (TOP VIEW) NC NC NC NC IN COMMON OUT NC − No internal connection absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Continuous input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±80 mA Duration of short-circuit current at (or below) 25°C (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C-suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C I-suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C M-suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D package . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG or LP package . . . . . . . . . . . . . . 300°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA ≤ 25 25°C C POWER RATING DERATING FACTOR ABOVE TA = 25°C TA = 70 70°C C POWER RATING TA = 85 85°C C POWER RATING TA = 125 125°C C POWER RATING D 725 mV 5.8 mW/°C 464 mW 377 mW 145 mW JG 1050 mV 8.4 mW/°C 672 mW 546 mW 210 mW LP 775 mV 6.2 mW/°C 496 mW 403 mW 155 mW recommended operating conditions C-SUFFIX I-SUFFIX M-SUFFIX MIN MAX MIN MAX MIN Input voltage, VI 4 40 4 40 4 40 V Operating free-air temperature, TA 0 70 −40 85 −55 125 °C 2 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • MAX UNIT SLOS065D − MARCH 1991 − REVISED APRIL 2002 electrical characteristics at specified free-air temperature, VI = 5 V, IO = 0 (unless otherwise noted) PARAMETER Output voltage MIN TYP MAX 25°C 2.48 2.5 2.52 Full range 2.47 Temperature coefficient of output voltage Bias current IO = 0 TLE2425C TA† TEST CONDITIONS 25°C 20 25°C 170 Full range VI = 4.5 V to 5.5 V Full range VI = 4 V to 40 V Full range Input voltage regulation 1.5 ∆VI(PP) = 1 V f = 120 Hz, Output voltage regulation (source current)‡ 1.5 25 25°C 80 Full range −250 IO = 0 to − 20 mA 25°C −450 −150 450 25°C −160 15 160 Full range −250 25°C −235 Noncumulative 25°C Short-circuit output current (source current) Output noise voltage, rms f = 10 Hz to 10 kHz 25°C 25°C VO to 0.1%, IO = ± 10 mA CL = 0 VO to 0.01%, IO = ± 10 mA CL = 0 Output voltage response to input voltage step VI = 4.5 to 5.5 V, VI = 4.5 to 5.5 V, VO to 0.1% VO to 0.01% 25°C Output voltage turn-on response VI = 0 to 5 V, VI = 0 to 5 V, VO to 0.1% VO to 0.01% 25°C Output voltage response to output current step CL = 100 pF 250 250 65 7.5 30 55 −30 −50 100 µV V µV/V V/V 160 µV µV 235 15 25°C VO = 5 V VO = 0 −45 µA A dB IO = 0 to − 10 mA Output impedance Short-circuit output current (sink current) 20 −160 IO = 0 to 20 mA ∆t = 1000 h, Long-term drift of output voltage 20 25°C IO = 0 to 10 mA Output voltage regulation (sink current)‡ 250 25 25°C V ppm/°C 250 25°C Ripple rejection 2.53 UNIT ppm 22.5 mΩ mA µV 110 115 25°C CL = 100 pF 180 µss 180 12 30 125 210 µss µss † Full range is 0°C to 70°C. ‡ The listed values are not production tested. WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 3 SLOS065D − MARCH 1991 − REVISED APRIL 2002 electrical characteristics at specified free-air temperature, VI = 5 V, IO = 0 (unless otherwise noted) PARAMETER TEST CONDITIONS Output voltage Temperature coefficient of output voltage Bias current IO = 0 TLE2425I TA† MIN TYP MAX 25°C 2.48 2.5 2.52 Full range 2.47 25°C 20 25°C 170 Full range VI = 4.5 V to 5.5 V Full range VI = 4 V to 40 V Full range Input voltage regulation ∆VI(PP) = 1 V f = 120 Hz, 1.5 75 25°C 80 Full range −250 IO = 0 to − 20 mA 25°C −450 −150 450 25°C −160 15 160 Full range −250 25°C −235 Noncumulative 25°C Short-circuit output current (source current) Output noise voltage, rms f = 10 Hz to 10 kHz 25°C 25°C VO to 0.1%, IO = ± 10 mA CL = 0 VO to 0.01%, IO = ± 10 mA CL = 0 Output voltage response to input voltage step VI = 4.5 to 5.5 V, VI = 4.5 to 5.5 V, VO to 0.1% VO to 0.01% 25°C Output voltage turn-on response VI = 0 to 5 V, VI = 0 to 5 V, VO to 0.1% VO to 0.01% 25°C Output voltage response to output current step CL = 100 pF WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 250 7.5 30 55 −30 −50 100 µV/V V/V µV µV 235 ppm 22.5 mΩ mA µV 110 115 25°C CL = 100 pF † Full range is − 40°C to 85°C. ‡ The listed values are not production tested. 250 65 µV V 160 15 25°C VO = 5 V VO = 0 −45 µA A dB IO = 0 to − 10 mA Output impedance Short-circuit output current (sink current) 20 −160 IO = 0 to 20 mA ∆t = 1000 h, Long-term drift of output voltage 20 25°C IO = 0 to 8 mA Output voltage regulation (sink current)‡ 250 75 25°C Output voltage regulation (source current)‡ 4 1.5 V ppm/°C 250 25°C Ripple rejection 2.53 UNIT 180 µss 180 12 30 125 210 µss µss SLOS065D − MARCH 1991 − REVISED APRIL 2002 electrical characteristics at specified free-air temperature, VI = 5 V, IO = 0 (unless otherwise noted) PARAMETER Output voltage MIN TYP MAX 25°C 2.48 2.5 2.52 Full range 2.47 Temperature coefficient of output voltage Bias current IO = 0 TLE2425M TA† TEST CONDITIONS 25°C 20 25°C 170 Full range VI = 4.5 V to 5.5 V Full range VI = 4.5 V to 40 V Full range Input voltage regulation 1.5 ∆VI(PP) = 1 V f = 120 Hz, Output voltage regulation (source current)‡ 1.5 25°C 80 Full range −250 IO = 0 to − 20 mA 25°C −450 −150 450 25°C −160 15 160 Full range −250 25°C −235 Noncumulative 25°C Short-circuit output current (source current) Output noise voltage, rms f = 10 Hz to 10 kHz 25°C 25°C VO to 0.1%, IO = ± 10 mA CL = 0 VO to 0.01%, IO = ± 10 mA CL = 0 Output voltage response to input voltage step VI = 4.5 to 5.5 V, VI = 4.5 to 5.5 V, VO to 0.1% VO to 0.01% 25°C Output voltage turn-on response VI = 0 to 5 V, VI = 0 to 5 V, VO to 0.1% VO to 0.01% 25°C Output voltage response to output current step CL = 100 pF 250 250 65 7.5 30 55 −30 −50 100 µV V µV/V V/V 160 µV µV 235 15 25°C VO = 5 V VO = 0 −45 µA A dB IO = 0 to − 10 mA Output impedance Short-circuit output current (sink current) 20 100 −160 IO = 0 to 20 mA ∆t = 1000 h, Long-term drift of output voltage 20 25°C IO = 0 to 3 mA Output voltage regulation (sink current)‡ 250 100 25°C V ppm/°C 250 25°C Ripple rejection 2.53 UNIT ppm 22.5 mΩ mA µV 110 115 25°C CL = 100 pF 180 µss 180 12 30 125 210 µss µs † Full range is − 55°C to 125°C. ‡ The listed values are not production tested. WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 5 SLOS065D − MARCH 1991 − REVISED APRIL 2002 TYPICAL CHARACTERISTICS Table Of Graphs FIGURE Output voltage Output voltage hysteresis Input bias current Distribution 1 vs Free-air temperature 2 vs Free-air temperature 3 vs Input voltage 4 vs Free-air temperature 5 Input voltage regulation 6 Ripple rejection vs Frequency Output voltage regulation 6 7 8 Output impedance vs Frequency 9 Short-circuit output current vs Free-air temperature 10 Spectral noise voltage density vs Frequency 11 Wide-band noise voltage vs Frequency 12 Output voltage change with current step vs Time 13 Output voltage change with voltage step vs Time 14 Output voltage power-up response vs Time 15 Output current vs Load capacitance 16 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • SLOS065D − MARCH 1991 − REVISED APRIL 2002 TYPICAL CHARACTERISTICS† OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE DISTRIBUTION OF OUTPUT VOLTAGE 24 VI = 5 V TA = 25°C 2.53 100 Units Tested From 1 Wafer Lot VI = 5 V IO = 0 2.52 VV) O − Output Voltage − V Percentage of Units − % 20 16 12 8 4 2.51 2.5 2.49 2.48 0 2.48 2.5 2.49 2.51 2.47 −75 2.52 −50 VO − Output Voltage − V −25 Figure 1 50 75 100 125 35 40 INPUT BIAS CURRENT vs INPUT VOLTAGE 4 250 VI = 5 V Normalized to First 25°C VO IO = 0 TA = 25°C IIB I IB − Input Bias Current − µ A Output Voltage Hysteresis − mV 25 Figure 2 OUTPUT VOLTAGE HYSTERESIS vs FREE-AIR TEMPERATURE 2 0 TA − Free-Air Temperature − °C Start Point 0 End Point −2 −4 −6 200 150 100 50 −8 −10 −75 0 −50 −25 0 25 50 75 100 125 0 5 10 TA − Free-Air Temperature − °C Figure 3 25 15 20 30 VI − Input Voltage − V Figure 4 † Data at high and low temperatures are applicable within rated operating free-air temperature ranges of the various devices. WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 7 SLOS065D − MARCH 1991 − REVISED APRIL 2002 TYPICAL CHARACTERISTICS† INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE 172 INPUT VOLTAGE REGULATION 80 VI = 5 V IO = 0 170 IO = 0 TA = 25°C ∆ VV) O − Output Voltage Change − µV IIB I IB − Input Bias Current − µ A 168 166 164 162 160 158 156 154 60 40 20 0 152 150 −75 −50 −20 −25 0 25 50 75 100 TA − Free-Air Temperature − °C 125 0 Figure 5 OUTPUT VOLTAGE REGULATION 100 90 VI = 5 V 80 ∆VV) O − Output Voltage Change − µV 80 70 60 50 40 30 VI = 5 V ∆VI(PP) = 1 V IO = 0 TA = 25°C 20 10 10 100 60 TA = − 40°C TA = 0°C 40 TA = − 55°C 20 0 −20 −40 10 k 100 k 1M TA = 125°C −60 −80 1k TA = 125°C TA = 25°C TA = 25°C −100 −10 −8 f − Frequency − Hz Figure 7 TA = − 55°C −6 −4 −2 0 2 4 6 IO − Output Current − mA Figure 8 † Data at high and low temperatures are applicable within rated operating free-air temperature ranges of the various devices. 8 40 Figure 6 RIPPLE REJECTION vs FREQUENCY Ripple Rejection − dB 30 10 20 VI − Input Voltage − V WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 8 10 SLOS065D − MARCH 1991 − REVISED APRIL 2002 TYPICAL CHARACTERISTICS OUTPUT IMPEDANCE vs FREQUENCY SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 56 100 IO = 0 IOS I OS − Short-Circuit Output Current − mA VI = 5 V TA = 25°C z o − Output Impedance − Ω 10 IO = 10 mA 1 0.1 IO = − 10 mA 0.01 10 100 1k 10 k 100 k 1M −IOS Output Source, VO = 0 52 50 48 46 44 42 40 0.001 IOS Output Sink, VO = 5 V 54 VI = 5 V −75 −50 f − Frequency − Hz 75 100 0 25 50 −25 TA − Free-Air Temperature − °C Figure 9 Figure 10 WIDE-BAND NOISE VOLTAGE vs FREQUENCY 1400 80 1200 70 Wide-Band Noise Voltage − µV V rms Vn − Spectral Noise Voltage Density − nV/ Hz SPECTRAL NOISE VOLTAGE DENSITY vs FREQUENCY 1000 800 600 400 200 VI = 5 V TA = 25°C 0 1 10 125 100 1k f − Frequency − Hz 10 k 100 k VI = 5 V TA = 25°C 1 Hz to Frequency Indicated 60 1 Pole Low Pass 50 40 30 20 2 Pole Low Pass 10 0 10 100 1k 10 k 100 k f − Frequency − Hz Figure 11 Figure 12 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 9 SLOS065D − MARCH 1991 − REVISED APRIL 2002 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE RESPONSE TO INPUT VOLTAGE STEP vs TIME OUTPUT VOLTAGE RESPONSE TO OUTPUT CURRENT STEP vs TIME 500 4 4 VI = 5 V CL = 100 pF TA = 25°C 3 0.1 % 2 1 ∆V O − Change In Output Voltage − mV ∆V O − Change In Output Voltage − mV 1.5 V 0.01 % 0 VO Response 0.01 % −1 −2 10 mA −3 IO Step 0.1 % 0 −10 mA −4 150 300 450 600 750 t − Time − s 900 IO = 0 CL = 100 pF TA = 25°C 1050 0.1 % 2 1 0 0.01 % VO Response −1 VI = 5.5 V −2 0.1 % −3 VI = 4.5 V −4 VI Step −500 0 −1.5 V 0 3 50 Figure 13 VI = 4.5 V 100 t − Time s 200 150 Figure 14 STABILITY RANGE OUTPUT VOLTAGE POWER-UP RESPONSE vs TIME 3 OUTPUT CURRENT vs LOAD CAPACITANCE 20 IO = 0 CL = 100 pF TA = 25°C 0.1 % 15 Unstable 10 I O − Output Current − mA VV) O − Output Voltage − V 2 VI = 5 V TA = 25°C Output Voltage Response 1 0 5 5 0 −5 Stable −10 −15 Input Voltage Step 0 0 10 t − Time s 20 130 −20 10 −6 10 −5 10 −4 10 −3 10 −2 10 −1 10 0 CL− Load Capacitance − F Figure 15 10 Figure 16 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 10 1 10 2 SLOS065D − MARCH 1991 − REVISED APRIL 2002 macromodel information * TLE2425 OPERATIONAL AMPLIFIER “MACROMODEL” SUBCIRCUIT * CREATED USING PARTS RELEASE 4.03 ON 08/21/90 AT 13:51 * REV (N/A) SUPPLY VOLTAGE: 5 V * CONNECTIONS: INPUT * | COMMON * | | OUTPUT * | | | .SUBCKT TLE2425 3 4 5 * * + OPAMP C1 C2 C3 CPSR DCM+ DCM− DC DE DLN DLP DP ECMR EGND EPSR ENSE FB −10E6 GA GCM GPSR GRC1 GRC2 GRE1 GRE2 HLIM HCMR IRP IEE IIO I1 Q1 Q2 R2 RCM REE RN1 RN2 SECTION 11 12 21.66E − 12 6 7 30.00E − 12 87 0 10.64E − 9 85 86 15.9E − 9 81 82 DX 83 81 DX 5 53 DX 54 5 DX 92 90 DX 90 91 DX 4 3 DX 84 99 (2,99) 1 99 0 POLY(2) (3,0) (4,0) 0 .5 .5 85 0 POLY(1) (3,4) −16.22E−6 3.24E−6 89 2 POLY(1) (88,0) 120E−6 1 7 99 POLY(6) VB VC VE VLP VLN VPSR O 74E6 6 0 11 12 320.4E−6 0 6 10 99 1.013E−9 85 86 (85,86) 100E−6 4 11 (4,11) 3.204E−4 4 12 (4,12) 3.204E−4 13 10 (13,10) 1.038E−3 14 10 (14,10) 1.038E−3 90 0 VLIM 1K 80 1 POLY(2) VCM+ VCM− 0 1E2 1E2 3 4 146E−6 3 10 DC 24.05E−6 2 0 .2E−9 88 0 1E−21 11 89 13 QX 12 80 14 QX 6 9 100.0E3 84 81 1K 10 99 8.316E6 87 0 2.55E8 87 88 11.67E3 74.8E6 −10E6 10E6 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 10E6 11 SLOS065D − MARCH 1991 − REVISED APRIL 2002 macromodel information (continued) RO1 8 5 63 RO2 7 99 62 VCM+ 82 99 1.0 VCM− 83 99 −2.3 VB 9 0 DC 0 VC 3 53 DC 1.400 VE 54 4 DC 1.400 VLIM 7 8 DC 0 VLP 91 0 DC 30 VLN 0 92 DC 30 VPSR 0 86 DC 0 RFB 5 2 1K RIN 30 1 1K RCOM 34 4 .1 *REGULATOR SECTION RG1 30 0 20MEG RG2 30 31 .2 RG3 31 35 400K RG4 35 34 411K RG5 31 36 25MEG HREG 31 32 POLY(2) VPSET VNSET 0 1E2 1E2 VREG 32 33 DC 0V EREG 33 34 POLY(1) (36,34) 1.23 1 VADJ 36 34 1.27V HPSET 37 0 VREG 1.030E3 VPSET 38 0 DC 20V HNSET 39 0 VREG 6.11E5 VNSET 40 0 DC −20V DSUB 4 34 DX DPOS 37 38 DX DNNEG 40 39 DX .MODEL DX D(IS=800.0E−18) .MODEL QX PNP(IS=800.0E−18 BF=480) .ENDS 12 WWW.TI.COM POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Qty Drawing Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) 5962-9555601Q2A OBSOLETE LCCC FK 20 TBD Call TI Call TI -55 to 125 5962-9555601QPA OBSOLETE CDIP JG 8 TBD Call TI Call TI -55 to 125 TLE2425CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425C TLE2425CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425C TLE2425CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425C TLE2425CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425C TLE2425CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type 2425C TLE2425CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type 2425C TLE2425CLPR OBSOLETE TO-92 LP 3 TBD Call TI Call TI TLE2425CPS ACTIVE SO PS 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Q2425 TLE2425CPSG4 ACTIVE SO PS 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Q2425 TLE2425CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Q2425 TLE2425CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Q2425 TLE2425ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425I TLE2425IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425I TLE2425IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425I TLE2425IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2425I TLE2425ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type 2425I Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 Orderable Device Status (1) Package Type Package Pins Package Qty Drawing Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) TLE2425ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLE2425MD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 2425M TLE2425MDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 2425M TLE2425MDR OBSOLETE SOIC D 8 TBD Call TI Call TI -55 to 125 2425M TLE2425MDRG4 ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 2425M TLE2425MFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI -55 to 125 TLE2425MJG OBSOLETE CDIP JG 8 TBD Call TI Call TI -55 to 125 TLE2425MJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI -55 to 125 TLE2425MLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI -55 to 125 2500 2425I (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Only one of markings shown within the brackets will appear on the physical device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated