NTSJ30U80CTG Very Low Forward Voltage Trench-based Schottky Rectifier Exceptionally Low VF = 0.42 V at IF = 5 A Features • Fine Lithography Trench−based Schottky Technology for Very Low • • • • • • Forward Voltage and Low Leakage Fast Switching with Exceptional Temperature Stability Low Power Loss and Lower Operating Temperature Higher Efficiency for Achieving Regulatory Compliance Low Thermal Resistance High Surge Capability Pb−Free and Halide−Free Packages are Available http://onsemi.com VERY LOW FORWARD VOLTAGE, LOW LEAKAGE SCHOTTKY BARRIER RECTIFIERS 30 AMPERES, 80 VOLTS PIN CONNECTIONS 1 Typical Applications 2, 4 • Switching Power Supplies including Notebook / Netbook Adapters, • • • • 3 ATX and Flat Panel Display High Frequency and DC−DC Converters Freewheeling and OR−ing diodes Reverse Battery Protection Instrumentation Mechanical Characteristics • Case: Epoxy, Molded • Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Maximum for TO−220FB CASE 221AH MARKING DIAGRAMS 10 sec AYWW TS30U80CG AKA 1 A Y WW AKA G = Assembly Location = Year = Work Week = Polarity Designator = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2011 November, 2011 − Rev. 0 1 Publication Order Number: NTSJ30U80CT/D NTSJ30U80CTG MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 125°C) Per device Per diode Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 120°C) Per device Per diode Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Symbol Value Unit VRRM VRWM VR 80 V IF(AV) A 30 15 IFRM A 60 30 IFSM 160 A TJ −40 to +150 °C Storage Temperature Tstg −40 to +150 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms Operating Junction Temperature Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Rating Maximum Thermal Resistance (insertion mounted to 1 oz FR4 Board) Symbol Value Unit Junction−to−Case RqJC 4.0 °C/W Junction−to−Ambient RqJA 105 °C/W 1. Junction−to−Case, using large Heatsink attached to device. 2. Junction−to−Ambient, using with no Heatsink. ELECTRICAL CHARACTERISTICS (Per Leg unless otherwise noted) Rating Symbol Maximum Instantaneous Forward Voltage (Note 3) (IF = 5 A, TJ = 25°C) (IF = 7.5 A, TJ = 25°C) (IF = 15 A, TJ = 25°C) vF (IF = 5 A, TJ = 125°C) (IF = 7.5 A, TJ = 125°C) (IF = 15 A, TJ = 125°C) Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 25°C) (Rated dc Voltage, TJ = 125°C) IR Typ Max 0.47 0.52 0.66 − − 0.80 0.42 0.48 0.60 − − 0.65 15 10 200 35 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0% ORDERING INFORMATION Device NTSJ30U80CTG Package Shipping TO−220FP (Pb−Free) 50 Units / Rail http://onsemi.com 2 Unit V mA mA NTSJ30U80CTG 100 100 TA = 150°C I R , REVERSE CURRENT (mA) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TYPICAL CHARACTERISITICS TA = 25°C 10 TA = 125°C 1.0 0.1 TA = 150°C 10 TA = 125°C 1.0 0.1 TA = 25°C 0.01 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 30 20 CJ, JUNCTION CAPACITANCE (pF) 10000 TJ = 25°C 1000 100 0.1 1 10 VR, REVERSE VOLTAGE (VOLTS) 100 30 25 20 15 SQUARE WAVE 10 5 0 0 20 30 dc RqJC = 1.3°C/W 45 40 35 30 25 SQUARE WAVE 20 15 10 5 0 20 40 60 80 100 120 TC, CASE TEMPERATURE (°C) PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) IF(AV), AVERAGE FORWARD CURRENT (A) 40 60 80 100 120 TC, CASE TEMPERATURE (°C) 140 Figure 4. Current Derating per Leg 60 0 RqJC = 1.3°C/W dc Figure 3. Typical Junction Capacitance 55 50 80 Figure 2. Typical Reverse Current IF(AV), AVERAGE FORWARD CURRENT (A) Figure 1. Typical Forward Voltage 50 70 40 60 VR, REVERSE VOLTAGE (VOLTS) 25 IPK/IAV = 5 IPK/IAV = 20 20 15 SQUARE WAVE 10 dc 5 0 140 IPK/IAV = 10 TA = 150°C 0 2 4 6 8 10 12 14 16 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Current Derating, Case Figure 6. Forward Power Dissipation http://onsemi.com 3 18 NTSJ30U80CTG TYPICAL CHARACTERISITICS R(t), TYPICAL TRANSIENT THERMAL RESISTANCE (°C/W) 10 50% Duty Cycle 1 20% 0.1 10% 5% 2% 1% 0.01 Single Pulse 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 t, Pulse Time (sec) Figure 7. Typical Transient Thermal Response, Junction−to−Case http://onsemi.com 4 100 1000 NTSJ30U80CTG PACKAGE DIMENSIONS TO−220 FULLPACK, 3−LEAD CASE 221AH ISSUE B A E B P E/2 0.14 M B A M SEATING PLANE A H1 A1 4 Q D C NOTE 3 1 2 3 L L1 3X 3X b2 c b 0.25 M B A M C A2 e NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR UNCONTROLLED IN THIS AREA. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH AND GATE PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO EXCEED 0.13 PER SIDE. THESE DIMENSIONS ARE TO BE MEASURED AT OUTERMOST EXTREME OF THE PLASTIC BODY. 5. DIMENSION b2 DOES NOT INCLUDE DAMBAR PROTRUSION. LEAD WIDTH INCLUDING PROTRUSION SHALL NOT EXCEED 2.00. DIM A A1 A2 b b2 c D E e H1 L L1 P Q MILLIMETERS MIN MAX 4.30 4.70 2.50 2.90 2.50 2.70 0.54 0.84 1.10 1.40 0.49 0.79 14.70 15.30 9.70 10.30 2.54 BSC 6.70 7.10 12.70 14.73 --2.80 3.00 3.40 2.80 3.20 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTSJ30U80CT/D