NTST30100SG Very Low Forward Voltage Trench-based Schottky Rectifier Exceptionally Low VF = 0.39 V at IF = 5 A Features • Fine Lithography Trench−based Schottky Technology for Very Low • • • • • • Forward Voltage and Low Leakage Fast Switching with Exceptional Temperature Stability Low Power Loss and Lower Operating Temperature Higher Efficiency for Achieving Regulatory Compliance Low Thermal Resistance High Surge Capability This is a Pb−Free Device http://onsemi.com VERY LOW FORWARD VOLTAGE, LOW LEAKAGE SCHOTTKY BARRIER RECTIFIERS 30 AMPERES, 100 VOLTS PIN CONNECTIONS 1 Typical Applications 2, 4 • Switching Power Supplies including Notebook / Netbook Adapters, • • • • 3 ATX and Flat Panel Display High Frequency and DC−DC Converters Freewheeling and OR−ing diodes Reverse Battery Protection Instrumentation 4 TO−220AB CASE 221A STYLE 6 Mechanical Characteristics • • • • • Case: Epoxy, Molded Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in Weight (Approximately): 1.9 grams Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Maximum for 10 sec 1 2 3 MARKING DIAGRAM AY WW NTST30100SG AKA A Y WW AKA G = Assembly Location = Year = Work Week = Polarity Designator = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2010 May, 2010 − Rev. 0 1 Publication Order Number: NTST30100S/D NTST30100SG MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR, TC = 105°C) IF(AV) 30 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 95°C) IFRM 60 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 250 A Operating Junction Temperature TJ −40 to +150 °C Storage Temperature Tstg −65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Rating Maximum Thermal Resistance Junction−to−Case Junction−to−Ambient Symbol Value Unit RqJC RqJA 2.0 70 °C/W °C/W ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) (IF = 5 A, TJ = 25°C) (IF = 10 A, TJ = 25°C) (IF = 30 A, TJ = 25°C) vF (IF = 5 A, TJ = 125°C) (IF = 10 A, TJ = 125°C) (IF = 30 A, TJ = 125°C) Maximum Instantaneous Reverse Current (Note 1) (VR = 70 V, TJ = 25°C) (VR = 70 V, TJ = 125°C) IR (Rated dc Voltage, TJ = 25°C) (Rated dc Voltage, TJ = 125°C) Typ Max 0.47 0.55 0.84 − − 0.95 0.39 0.51 0.7 − − 0.78 27 11 70 23 1000 45 ORDERING INFORMATION NTST30100SG Package Shipping TO−220AB (Pb−Free) 50 Units / Rail http://onsemi.com 2 V mA mA 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0% Device Unit mA mA NTST30100SG TYPICAL CHARACTERISTICS 1000 IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) 100 TA = 150°C 10 TA = 25°C 1 0.1 0.0 TA = 125°C 0.2 0.4 0.6 0.8 1.0 1.2 TA = 125°C 1 0.1 TA = 25°C 0.01 30 40 50 60 70 80 90 100 VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 1. Typical Instantaneous Forward Characteristics Figure 2. Typical Reverse Characteristics 60 TJ = 25°C 55 IF(AV), AVERAGE FORWARD CURRENT (A) 1000 1 10 VR, REVERSE VOLTAGE (V) 100 45 40 35 30 25 SQUARE WAVE 20 15 10 5 0 0 IPK/IAV = 10 35 IPK/IAV = 20 30 25 20 40 60 80 100 120 TC, CASE TEMPERATURE (°C) Figure 4. Current Derating, Case 45 40 RqJC = 2.0°C/W dc 50 Figure 3. Typical Junction Capacitance PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) C, JUNCTION CAPACITANCE (pF) 10 0.001 20 10000 100 0.1 TA = 150°C 100 IPK/IAV = 5 TA = 150°C SQUARE WAVE 20 15 dc 10 5 0 0 5 10 15 20 25 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Forward Power Dissipation http://onsemi.com 3 30 140 NTST30100SG R(t), TYPICAL TRANSIENT THERMAL RESISTANCE (°C/W) 10 1 50% Duty Cycle 20% 0.1 10% 5% 2% 1% 0.01 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 t, Pulse Time (sec) 1 10 Figure 6. Typical Transient Thermal Response, Junction−to−Case http://onsemi.com 4 100 1000 NTST30100SG PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AF −T− B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 6: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 ANODE CATHODE ANODE CATHODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTST30100S/D