Model AK Digital Pressure Test Gauge DESCRIPTION The hand-held Model AK is an in-progress gauge or por- ond. These units are manufactured from stainless steel and use table calibrator and delivers long-lasting, enhanced accuracy sensor technology which has no moving parts, requires little performance. Accuracy of 0.05 % coupled with an enhanced recalibration and has excellent overpressure tolerance. Optional resolution, 4½-digit display makes this unit an excellent transfer NEMA 4 rating extends the operating temperature to -18 °C to standard for calibrating pressure measuring equipment. 82 °C [0 °F to 180 °F]. Units of measure are field-selectable and The AK is rugged and features high/low pressure capture with a field-adjustable update rate from three to 10 times per sec- the unit is offered with gage, absolute, vacuum, or compound reference. * with optional NEMA 4 rating FEATURES • High accuracy: 0.05 % full scale • 0 °F to 180 °F operating temperature* • Enhanced resolution • Stainless steel construction • Field-selectable units of measure • 4½ digit display with 0.5 in height • Customer recalibration • On/Off switch • CE compliant (certain models, consult factory) • NEMA 4 rating (optional) • Optional carrying case and panel mounting ring • Optional pressure ports • NIST traceable (optional) • 9 V battery power • High/low capture and store Model AK PERFORMANCE SPECIFICATIONS Characteristic Measure Accuracy 0.05 % of full scale BFSL Pressure ranges 0 psi to 15, 50, 100, 200, 500, 750, 1000, 1500, 2000, 5000, 7500, 10000 psi ADDITIONAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Pressure range (psi) Maximum safe over pressure (psi)1 Incremental display steps 0 psi to 15 psi = 15 75 0.005 0 psi to 50 psi = 50 250 0.01 0 psi to 100 psi = 100 500 0.02 0 psi to 200 psi = 200 1000 0.05 0 psi to 500 psi = 500 1500 0.1 Characteristic Measure 0 psi to 750 psi = 750 1500 0.2 Temperature, operating (standard) -1 °C to 71 °C [30 °F to 160 °F] 0 psi to 1000 psi = 1K 2000 0.2 Temperature, operating (optional) -18 °C to 82 °C [0 °F to 180 °F] (NEMA 4 option required) 0 psi to 1500 psi = 1.5K 3000 0.5 0 psi to 2000 psi = 2K 4000 0.5 0 psi to 5000 psi = 5K 7500 1 0 psi to 7500 psi = 7.5K 12000 2 0 psi to 10000 psi = 10K 15000 2 ELECTRICAL SPECIFICATIONS Characteristic Measure Rating NEMA 2 (NEMA 4 optional, except AKT) Display 4½ LCD digits - 12,7 mm [0.5 in] high Power, Model AKW One or two 9 V alkaline batteries (included) Power, Model AKT 110 Vac adapter @ 60 Hz (included) Power, Model AKV 11 Vdc to 32 Vdc @ 100 mA (3 ft cable included) 1 Maximum safe overpressure is the pressure which the unit can experience occasionally without the loss of accuracy or permanent damage ORDER CODES AK ORDER CODE W 200 G Z * = Example SERIES AK* POWER MECHANICAL SPECIFICATIONS Characteristic Measure W T V Physical diameter 93,98 mm [3.7 in] PRESSURE RANGE (PSI) Pressure port 9/16-18 UNF-2B, female straight thread with SAE spec J514 0-ring boss Wetted parts Stainless steel 15 50 100 200 Case material Stainless steel REFERENCE Low battery indication Standard High and low capture Standard Update speed Adjustable from 3 to 10 per second Face membrane Tactile feedback raised memory chips ELECTRICAL CONNECTION Calibration data Stored on memory chip Z = No electrical connection (Model AKW - 9 V battery)* C = 3 foot cable (Model AKV) T = ac adapter (Model AKT) G A V C = Battery Powered (9 V alkaline)* = 110 Vac adapter (included) = 11 Vdc to 32 Vdc (3 ft. cable) = = = = = = = = 0-15 0-50 0-100 0-200* 500 = 750 = 1K = 1.5K = 0-500 0-750 0-1000 0-1500 2K = 5K = 7.5K = 10K = 0-2000 0-5000 0-7500 0-10000 Gage (std) reads zero at atmosphere * Absolute (opt) reads zero at vacuum (15 psi or higher) Vacuum (opt) scaled in In Hg (15 psi or lower) Compound (opt) reads both positive & negative (vacuum) pressure Call factory for availability of other electrical connections & cable lengths. OPTIONAL 4 = NEMA 4 (Not available on AKT) NEMA 4 option also provides temperature range of 0-180°F FIELD SELECTABLE STANDARD UNITS OF MEASURE Each gauge has the following scaling built in for field selection: Bar mBar kPa MPa = Bar = Millibar = Kilopascals = Megapascals Ft H20 In H20 In Hg mmHg = = = = Feet of water Inches of water Inches of mercury mm of mercury Consult factory for other units of measure not listed 2 Honeywell • Sensing and Control 4 Model AK Digital Pressure Test Gauge Mounting dimensions and characteristics Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For reference only Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Notes 1. Ure faci bla feuipit nostin vullam zzril 2. Ure faci bla feuipit nostin vullam zzril dolesto consent nis del ipsuscilis nismodiamcor sustinit am eugait velestinit ut nibh elisim eugait nim iril ut del duisi. 3. Ure faci bla feuipit nostin vullam zzril dolesto consent nis del4. Ure faci bla feuipit nostin vullam zzril dolesto consent nis del5. Ure faci bla feuipit nostin vullam zzril dolesto consent nis del 6. Ure faci bla feuipit nostin vullam zzril dolesto consent nis del ipsuscilis nismodiamcor sustinit am eugait velestinit ut nibh elisim eugait nim iril ut del duisi. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008689-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.