Model LC Model LC shown with optional handle. Digital Force Indicator DESCRIPTION The Model LC digital force indicator is a highly portable force Each unit has a membrane face with raised buttons and tactile measurement device. With its 9 V battery supply and compact feedback for setup and operation. The high, low, and clear but- size the indicator can easily be carried to remote locations to tons are easily accessible on this front membrane. Zero adjust- perform force measurement calibrations. The unit can measure ment and zero offset/tare functions are standard on each unit. compression forces up to 50,000 lbs. Calibration and setup parameters are stored on a memory chip The peak capture feature allows the highest force reading taken to be displayed with the push of a button. The remote location of the load sensor minimizes the chance of damage to the electronic body of the gauge. The stainless steel construction of the sensor and the indicator makes them often resistant to the occasional mishandling than can occur in the field. Optional handles are available for the load cell and gauge. FEATURES • Ranges to 50000 lb • Compression measurement • High/low force capture • Zero offset/tare • NIST traceable • Customer recalibration • Optional handles and panel mounting ring • Optional carrying case • Optional NEMA 4 rating • Selectable engineering units to protect from loss even when power is interrupted. Unauthorized set ups and calibrations are also blocked with internal security. Various combinations of the front panel buttons can be de-activated. Model LC PERFORMANCE SPECIFICATIONS ADDITIONAL SPECIFICATIONS Characteristic Measure Pressure range (psi) Incremental display steps Repeatability 0.2 % of full scale 0 psi to 1 psi (opt) = 1 0.001 Range 5 lb to 50000 lb 0 psi to 5 psi (opt) = 5 0.005 High and low capture Standard 0 psi to 25 psi = 25 0.005 Update speed 3 per sec (selectable to 10 per sec) 0 psi to 50 psi = 50 0.01 0 psi to 100 psi = 100 0.02 0 psi to 250 psi = 250 0.05 0.1 ELECTRICAL SPECIFICATIONS Characteristic Measure 0 psi to 500 psi = 500 Power 9 V battery, 11 Vdc to 32 Vdc, 100 Vac 0 psi to 1000 psi = 1K 0.2 0 psi to 2000 psi = 2K 0.5 0 psi to 3000 psi = 3K 2 MECHANICAL SPECIFICATIONS 0 psi to 4000 psi = 4L 2 Characteristic Measure 0 psi to 5000 psi = 5K 1 Diameter 93,98 mm [3.7 in] 0 psi to 7500 psi = 7.5K 2 Display 4½ digits 0 psi to 10000 psi = 10K 2 Case material Stainless steel 0 psi to 15000 psi = 15K 2 Cell materials Stainless steel 0 psi to 20000 psi = 20K 2 Zero/span adjustment Standard 0 psi to 30000 psi = 30K Consult factory Low battery indication Standard 0 psi to 50000 psi = 50K Consult factory Face membrane Tactile feedback Calibration data Stored on memory chip Mounting dimensions 2 Honeywell • Sensing and Control ACCESSORIES ORDER CODES Order code Accessory CC2 Standard carrying case: 3 9/16 D x 7 13/16 W x 8 1/2 L MR2 Panel mounting ring NISTCERTS NIST certification (in addition to NIST statement) HD1 Handle Model LC Digital Force Indicator NOTES 1. Accuracies stated are for best fit straight line for all errors including linearity, hysteresis and repeatability through zero. 2. Consult factory for optional units of measure. 3. Consult factory for optional electrical connectors and cable lengths. ORDER GUIDE SERIES LC=0.2% repeatability LC W 100 K Z ( ) POWER W=Battery powered (9 V alkaline) T=110 Vac adapter (included) V=11 Vdc to 32 Vdc (3 ft. cable) PRESSURE RANGE (lb) 5=0-5 1K=0-1000 10=0-10 2K=0-2000 25=0-25 3K=0-3000 50=0-50 4K=0-4000 100=0-100 5K=0-5000 250=0-250 7.5K=7500 500=0-500 standard This order code is used ONLY if you want NEMA 4 rating. 10K=0-10,000 15K=0-15,000 20K=0-20,000 30K=0-30,000 50K-0-50,000 While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. REFERENCE K=Compression For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] ELECTRICAL CONNECTION Z = No electrical connection C = 3 foot cable T = ac adapter Call factory for availability of other electrical connections and cable lengths. UNITS OF MEASURE (Field Selectable) Note: lbs is standard n = Newton Kn = Kilonewton g = Grams Kg = Kilograms Consult factory for other units of measure not listed OPTIONAL NEMA 4 CONSTRUCTION 4 = NEMA 4 Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008671-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.