LESHAN RADIO COMPANY, LTD. Power MOSFET 20 V, 285 mA, P−Channel with ESD Protection, SOT−723 LNTK3043PT5G S-LNTK3043PT5G Features • • • • • • • • Enables High Density PCB Manufacturing 44% Smaller Footprint than SC−89 and 38% Thinner than SC−89 Low Voltage Drive Makes this Device Ideal for Portable Equipment Low Threshold Levels, VGS(TH) < 1.3 V Low Profile (< 0.5 mm) Allows It to Fit Easily into Extremely Thin Environments such as Portable Electronics Operated at Standard Logic Level Gate Drive, Facilitating Future Migration to Lower Levels Using the Same Basic Topology These are Pb−Free Devices S- Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. V(BR)DSS RDS(on) TYP ID Max 1.5 W @ 4.5 V 2.4 W @ 2.5 V 20 V 285 mA 5.1 W @ 1.8 V 6.8 W @ 1.65 V Top View 3 Applications • Interfacing, Switching • High Speed Switching • Cellular Phones, PDAs MAXIMUM RATINGS (TJ = 25°C unless otherwise stated) Parameter Symbol Value Unit Drain−to−Source Voltage VDSS 20 V Gate−to−Source Voltage VGS ±10 V Steady State tv5s Power Dissipation (Note 1) Steady State TA = 25°C TA = 85°C TA = 25°C Power Dissipation (Note 2) Pulsed Drain Current mA MARKING DIAGRAM 440 TA = 25°C PD mW 545 TA = 25°C Steady State 185 285 tv5s Continuous Drain Current (Note 2) 1 − Gate 2 − Source 3 − Drain 255 ID 2 ID TA = 85°C TA = 25°C tp = 10 ms 155 310 IDM 400 mA −55 to 150 °C 286 mA Lead Temperature for Soldering Purposes (1/8” from case for 10 seconds) 260 °C IS TL SOT−723 CASE 631AA mA PD Operating Junction and Storage Temperature TJ, TSTG Source Current (Body Diode) (Note 2) KB 210 mW KB M M Continuous Drain Current (Note 1) 1 1 = Device Code = Date Code ORDERING INFORMATION Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Surface−mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces) 2. Surface−mounted on FR4 board using the minimum recommended pad size. Device Package Shipping † LNTK3043PT5G S-LNTK3043PT5G SOT−723* 8000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *These packages are inherently Pb−Free. Rev .O 1/5 LESHAN RADIO COMPANY, LTD. LNTK3043PT5G , S-LNTK3043PT5G THERMAL RESISTANCE RATINGS Parameter Symbol Max Junction−to−Ambient – Steady State (Note 3) RqJA 280 Junction−to−Ambient – t = 5 s (Note 3) RqJA 228 Junction−to−Ambient – Steady State Minimum Pad (Note 4) RqJA 400 Unit °C/W 3. Surface−mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces) 4. Surface−mounted on FR4 board using the minimum recommended pad size. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Test Condition Symbol Min Drain−to−Source Breakdown Voltage VGS = 0 V, ID = 100 mA V(BR)DSS 20 Drain−to−Source Breakdown Voltage Temperature Coefficient ID = 100 mA, Reference to 25°C V(BR)DSS/TJ Zero Gate Voltage Drain Current VGS = 0 V, VDS = 16 V Typ Max Unit OFF CHARACTERISTICS TJ = 25°C 27 IDSS mV/°C 1 TJ = 125°C VDS = 0 V, VGS = ±5 V Gate−to−Source Leakage Current V 10 IGSS mA 1 mA 1.3 V ON CHARACTERISTICS (Note 3) Gate Threshold Voltage VGS = VDS, ID = 250 mA Gate Threshold Temperature Coefficient Drain−to−Source On Resistance 0.4 VGS(TH)/TJ −2.4 RDS(ON) 1.5 3.4 VGS = 4.5V, ID = 255 mA 1.6 3.8 VGS = 2.5 V, ID = 1 mA 2.4 4.5 VGS = 1.8 V, ID = 1 mA 5.1 10 VGS = 1.65 V, ID = 1 mA 6.8 15 VGS = 4.5V, ID = 10 mA Forward Transconductance VGS(TH) VDS = 5 V, ID = 100 mA gFS 0.275 CISS 11 COSS 8.3 CRSS 2.7 td(ON) 13 tr 15 td(OFF) 94 tf 55 VSD 0.83 mV/°C W S CHARGES, CAPACITANCES AND GATE RESISTANCE Input Capacitance Output Capacitance VGS = 0 V, f = 1 MHz, VDS = 10 V Reverse Transfer Capacitance pF SWITCHING CHARACTERISTICS, VGS= 4.5 V (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time VGS = 4.5 V, VDD = 5 V, ID = 10 mA, RG = 6 W Fall Time ns DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VGS = 0 V, IS= 286 mA TJ = 25°C TJ = 125°C Reverse Recovery Time Charge Time Discharge Time VGS = 0 V, VDD = 20 V, dISD/dt = 100 A/ms, IS = 286 mA Reverse Recovery Charge 0.69 tRR 9.1 ta 7.1 tb 2.0 QRR 3.7 1.2 V ns nC 5. Pulse Test: pulse width v 300 ms, duty cycle v 2% 6. Switching characteristics are independent of operating junction temperatures Rev .O 2/5 LESHAN RADIO COMPANY, LTD. LNTK3043PT5G , S-LNTK3043PT5G TYPICAL PERFORMANCE CURVES 0.3 VDS ≥ 5 V 2.5 V ID, DRAIN CURRENT (AMPS) ID, DRAIN CURRENT (AMPS) 0.3 VGS = 3 V to 10 V TJ = 25°C 0.2 2.2 V 2.0 V 0.1 1.8 V 1.6 V 1.4 V 0 0 2 1 4 3 0.2 0.1 TJ = 125°C TJ = 25°C TJ = −55°C 0 5 1 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 2. Transfer Characteristics 5 ID = 0.255 A TJ = 25°C 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) Figure 1. On−Region Characteristics 6 TJ = 25°C 5 4 VGS = 2.5 V 3 2 VGS = 4.5 V 1 0 Figure 4. On−Resistance vs. Drain Current and Gate Voltage Figure 3. On−Resistance vs. Gate−to−Source Voltage 9.0 1000 VGS = 0 V 8.0 VGS = 1.65 V, ID = 1 mA 7.0 6.0 IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE 0.3 0.2 0.1 ID, DRAIN CURRENT (AMPS) VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) VGS = 1.8 V, ID = 10 mA 5.0 4.0 VGS = 2.5 V, ID = 10 mA 3.0 2.0 100 TJ = 150°C TJ = 125°C 10 VGS = 4.5 V, ID = 10 mA 1.0 0 −50 2 1.5 2.5 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) 1 −25 0 25 50 75 100 125 150 5 10 15 20 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage Rev .O 3/5 LESHAN RADIO COMPANY, LTD. LNTK3043PT5G , S-LNTK3043PT5G TYPICAL PERFORMANCE CURVES 25 1000 TJ = 25°C VDD = 5 V ID = 10 mA VGS = 4.5 V Crss t, TIME (ns) 20 15 Ciss 10 Coss td(off) tf 100 tr td(on) 10 5 0 10 VDS = 0 V 5 VGS = 0 V 0 VGS Crss 5 10 15 20 VDS GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (V) Figure 7. Capacitance Variation 1 1 10 RG, GATE RESISTANCE (OHMS) 100 Figure 8. Resistive Switching Time Variation vs. Gate Resistance 0.4 IS, SOURCE CURRENT (AMPS) C, CAPACITANCE (pF) Ciss VGS = 0 V TJ = 25°C 0.3 0.2 0.1 TJ = 150°C TJ = 125°C 0 0.4 TJ = −55°C 0.6 0.8 0.9 0.5 0.7 VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) 1.0 Figure 9. Diode Forward Voltage vs. Current Rev .O 4/5 LESHAN RADIO COMPANY, LTD. LNTK3043PT5G , S-LNTK3043PT5G PACKAGE DIMENSIONS SOT−723 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. −X− D A b1 −Y− 3 E 1 e HE L 2 b 2X 0.08 (0.0032) X Y DIM A b b1 C D E e HE L C MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.15 0.21 0.27 0.25 0.31 0.37 0.07 0.12 0.17 1.15 1.20 1.25 0.75 0.80 0.85 0.40 BSC 1.15 1.20 1.25 0.15 0.20 0.25 INCHES MIN NOM MAX 0.018 0.020 0.022 0.0059 0.0083 0.0106 0.010 0.012 0.015 0.0028 0.0047 0.0067 0.045 0.047 0.049 0.03 0.032 0.034 0.016 BSC 0.045 0.047 0.049 0.0059 0.0079 0.0098 SOLDERING FOOTPRINT* 0.40 0.0157 0.40 0.0157 1.0 0.039 0.40 0.0157 0.40 0.0157 0.40 0.0157 SCALE 20:1 mm Ǔ ǒinches Rev .O 5/5