ALUMINUM ELECTROLYTIC CAPACITORS HN Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C Ultra Low Impedance, For PC motherboard series Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low Impedance HN Low Impedance HM Specifications Sleeve : BLACK ltem Performance Characteristics – 25 to +105˚C 6.3 to 16V 330 to 8200µF ± 20% (120Hz, 20˚C) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 0.22 0.19 tan δ (MAX.) 0.16 Rated voltage (V) 6.3 10 16 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z—25˚C / Z+20˚C 3 3 3 Category Temperature Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours at 105˚C, the peak voltage shall not exceed the rated voltage. Marking Printed with gold color letter on black sleeve. 120Hz 20˚C 120Hz Within ±30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Radial Lead Type Type numbering system (Example : 6.3V 1800µF) 1 φd 2 3 4 5 6 7 8 9 10 11 12 UHN 0 J 1 8 2 MPD Sleeve (P.E.T.) φD+0.5 MAX. Size code P ± 0.5 Configuration Capacitance tolerance (± 20%) Rated capacitance (1800µF) Rated voltage (6.3V) L+1.5MAX. 15MIN 4MIN Pressure relief vent (mm) φD 8 10 12.5 16 P 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.8 Series name Type Configuration φD • Please refer to page 20 about the end seal configulation. Pb-free leadwire Pb-free PET sleeve 8 · 10 PD 12.5 · 16 HD Standard Ratings V (Code) Cap. (µF) 330 Item Co de Case size φD × L (mm) 6.3 (0J) Impedance Rated ripple (mΩ) MAX. (mArms) 20˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) 10 (1A) Impedance Rated ripple (mΩ) MAX. (mArms) 20˚C / 100kHz 105˚C / 100kHz 331 470 471 560 561 680 681 820 821 8 × 11.5 8 × 15 21 20 1300 1700 1000 102 10 × 12.5 18 1760 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 4700 5600 8200 472 562 822 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 8 × 20 10 × 16 10 × 20 10 × 20 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 16 × 25 20 18 12 11 11 12 11 10 10 9 9 9 8 7 1700 1760 2220 2280 2280 2220 2280 2900 2900 3190 3190 3190 3370 3610 8 × 11.5 21 1300 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 8 × 11.5 21 1300 8 × 11.5 21 1300 10 × 12.5 18 1760 10 × 12.5 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 16 18 18 11 12 11 11 1760 1760 2280 2220 2280 2280 8 × 20 12 2220 10 × 20 10 2900 10 × 25 12.5 × 20 12.5 × 20 9 9 9 12.5 × 25 12.5 × 25 16 × 25 16 (1C) Impedance Case size Rated ripple (mΩ) MAX. φD × L (mArms) 20˚C / 100kHz 105˚C / 100kHz (mm) 8 × 11.5 21 1300 8 × 11.5 21 1300 10 × 12.5 18 1760 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 16 8 × 20 10 × 20 10 × 20 18 12 11 11 11 12 10 10 1760 2220 2280 2280 2280 2220 2900 2900 10 × 20 10 2900 3190 3190 3190 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 25 9 9 9 8 8 3190 3190 3190 3370 3370 8 3370 16 × 25 7 3610 8 7 3370 3610 : In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system. CAT.8100Z