ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboard series Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new designs HM Low Impedance HN Low Impedance HD Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics –40 to +105˚C 6.3 to 16V 330 to 12000µF ±20% (120Hz, 20˚C) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Tangent of loss angle Rated voltage (V) 6.3 10 16 120Hz 20˚C (tan δ) tan δ (MAX.) 0.22 0.19 0.16 6.3 10 16 Rated voltage (V) 120Hz Stability at Low Temperature 3 3 3 Impedance ratio ZT / Z20 (MAX.) Z—40˚C / Z+20˚C Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours at 105˚C, the peak voltage shall not exceed the rated voltage. Marking Printed with white color letter on black sleeve. Radial Lead Type Within ±25% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 6.3V 1800µF) φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 Size Code P ± 0.5 φD+0.5 MAX. U HM 0 J 1 8 2 M P D Configuration Capacitance tolerance (±20%) Rated capacitance (1800µF) (mm) L+1.5MAX. 15MIN 4MIN φD 8 10 12.5 16 18 Rated voltage (6.3V) P 3.5 5.0 5.0 7.5 7.5 Series name φd 0.6 0.6 0.6 0.8 0.8 Pressure relief vent Please refer to page 20 about the end seal configulation. Configuration Pb-free leadwire Pb-free PET sleeve φD 8 · 10 PD 12.5 to 18 HD Type Standard Ratings V (Code) Item Cap.(µF) 330 Code 6.3 (0J) Case size φD × L (mm) Impedance (mΩ) MAX. 10 (1A) Rated ripple (mArms) 20˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) Impedance (mΩ) MAX. 16 (1C) Rated ripple 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 8 × 11.5 30 Impedance (mΩ) MAX. Rated ripple 8 × 11.5 8 × 11.5 10 × 12.5 30 30 25 1140 1140 1540 × 12.5 × 15 × 20 × 16 25 28 18 18 1540 1490 1870 2000 10 × 16 8 × 20 10 × 20 18 18 13 2000 1870 2550 10 × 20 13 2550 10 × 25 12.5 × 20 12 11 2800 2800 20˚C / 100kHz (mArms) 105˚C / 100kHz 8 × 11.5 30 1140 8 × 11.5 30 1140 10 × 12.5 25 1540 × 12.5 × 15 × 16 × 20 25 28 18 18 1540 1490 2000 1870 10 × 16 8 × 20 18 18 2000 1870 10 × 20 13 2550 10 × 25 12 2800 12.5 × 20 11 3000 12.5 × 25 10 2900 12.5 × 25 10 2900 16 × 25 9 3070 18 × 25 8 3250 16 × 25 18 × 25 9 8 3070 3250 331 470 Case size φD × L (mm) (mArms) 20˚C / 100kHz 105˚C / 100kHz 1140 8 8 10 8 × 11.5 × 15 × 12.5 × 11.5 30 28 25 30 1140 1490 1540 1140 8 10 8 10 10 8 10 8 10 10 10 12.5 10 12.5 × 15 × 12.5 × 20 × 16 × 16 × 20 × 20 × 20 × 16 × 20 × 25 × 20 × 20 × 25 28 25 16 18 19 16 13 16 18 13 12 11 13 10 1490 1540 1950 2000 2000 1950 2550 1950 2000 2550 2800 3000 2550 2900 5600 562 6800 682 16 × 25 9 3070 8200 822 18 × 25 8 3250 12000 123 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 10 8 10 8 10 8 8 10 : In this case, 6 will be put at 12th digit of typeWider numbering range system. of rating. : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. CAT.8100A-1