PDL06 SERIES

PDL06 SERIES
DC-DC CONVERTER
2:1 WIDE INPUT RANGE
UP TO 6 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED
• UP TO 3000VDC INPUT TO OUTPUT ISOLATION
• SMALL SIZE AND LOW PROFILE:
:0.86 X 0.36 X 0.44 INCH
• LOW OUTPUT RIPPLE AND NOISE
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
3000VDC
ISOLATION
1600VDC
ISOLATION
REMOTE
CONTROL
OCP
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• DISTRIBUTED POWER ARCHITECTURES
• SEMICONDUCTOR EQUIPMENT
SCP
UVP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25
Model
Number
PDL06-05S3P3
PDL06-05S05
PDL06-05S09
PDL06-05S12
PDL06-05S15
PDL06-05S24
PDL06-05D05
PDL06-05D12
PDL06-05D15
PDL06-12S3P3
PDL06-12S05
PDL06-12S09
PDL06-12S12
PDL06-12S15
PDL06-12S24
PDL06-12D05
PDL06-12D12
PDL06-12D15
PDL06-24S3P3
PDL06-24S05
PDL06-24S09
PDL06-24S12
PDL06-24S15
PDL06-24S24
PDL06-24D05
PDL06-24D12
PDL06-24D15
PDL06-48S3P3
PDL06-48S05
PDL06-48S09
PDL06-48S12
PDL06-48S15
PDL06-48S24
PDL06-48D05
PDL06-48D12
PDL06-48D15
1
otherwise noted
Input Range
Output Voltage
Output Current
@Full Load
Input Current
@ No Load
Efficiency
Maximum
Capacitor Load
VDC
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
4.5 ~ 9
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
9 ~ 18
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
18 ~ 36
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
36 ~ 75
VDC
3.3
5
9
12
15
24
±5
±12
±15
3.3
5
9
12
15
24
±5
±12
±15
3.3
5
9
12
15
24
±5
±12
±15
3.3
5
9
12
15
24
±5
±12
±15
mA
1300
1200
666
500
400
250
±600
±250
±200
1300
1200
666
500
400
250
±600
±250
±200
1300
1200
666
500
400
250
±600
±250
±200
1300
1200
666
500
400
250
±600
±250
±200
mA
65mA
105mA
105mA
105mA
105mA
105mA
105mA
105mA
105mA
40mA
55mA
55mA
55mA
55mA
55mA
55mA
55mA
55mA
20mA
28mA
28mA
28mA
28mA
28mA
28mA
28mA
28mA
14mA
14mA
14mA
14mA
14mA
14mA
14mA
14mA
14mA
%
77
81
83
84
84
84
81
84
84
78
83
85
85
85
84
82
84
85
78
83
85
86
86
85
82
85
85
78
82
84
85
86
84
82
84
85
µF
6600
3300
2000
1600
1400
680
±2000
±900
±660
6600
3300
2000
1600
1400
680
±2000
±900
±660
6600
3300
2000
1600
1400
680
±2000
±900
±660
6600
3300
2000
1600
1400
680
±2000
±900
±660
www.PDUKE.com
2015/05/20
PDL06
PART NUMBER STRUCTURE
PDL06 - 48
Series Name
S
Input
Voltage
(VDC)
05: 4.5~9
12:9~18
24:18~36
48:36~75
Output
Quantity
S:Single
D: Dual
05
H
Output
Case & Isolation
Voltage
Option
(VDC)
3P3: 3.3 : Standard type
05: 5
Plastic case
09: 9
1600VDC isolation
12:12
H: Plastic case
15:15
3000VDC isolation
M: Metal case
05:± 5
1600VDC isolation
12:±12
15:±15
INPUT SPECIFICATIONS
Parameter
Conditions
Operating input voltage range
5Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
5Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
5Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
Power up
Remote ON/OFF
5Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
Start up voltage
Shutdown voltage
Start up time
Constant resistive load
Input surge voltage
1 second, max.
Input reflected ripple current
Input filter
Remote ON/OFF
Application circuit
DC-DC ON
OUTPUT SPECIFICATIONS
Parameter
Voltage accuracy
Line regulation
Load regulation
Cross regulation
Ripple and noise
Temperature coefficient
Transient response recovery time
Short circuit protection
2
Typ.
Max.
4.5
9
18
36
5
12
24
48
9
18
36
75
4.5
9
18
36
3.5
7
15
33
5
5
DC-DC ON
DC-DC OFF
Remote off input current
Ctrl pin applied current via 1kΩ
Min.
2
Unit
VDC
VDC
VDC
10
10
15
36
50
100
ms
VDC
30
mAp-p
Capacitor type
Open or high impedance
3
4
mA
2.5
mA
DC-DC OFF
Conditions
Low Line to High Line at Full Load
No Load to Full Load
Asymmetrical load 25%/100% FL
20MHz bandwidth
25% load step change
www.PDUKE.com
Min.
Single
Dual
Dual
Typ.
-1.0
-0.2
-1.0
-1.0
-5.0
Max.
Unit
+1.0
+0.2
+1.0
+1.0
+5.0
%
%
%
%
mVp-p
-0.02
+0.02
%/℃
500
µs
Continuous, automatics recovery
50
2015/05/20
PDL06
GENERAL SPECIFICATIONS
Parameter
Isolation voltage
Conditions
1 minute
Input to Output
Input (Output) to Case
Isolation resistance
Isolation capacitance
Switching frequency
Safety approvals
Max.
GΩ
50
50
50
Full load to minimum load
100
Standard Type
Suffix ”H”
Suffix ”M”
MIL-HDBK-217F
ENVIRONMENTAL SPECIFICATIONS
Parameter
Operating ambient temperature
Standard Type
Suffix ”H”
Suffix ”M”
Standard Type
Suffix ”H”
Suffix ”M”
Conditions
Standard type
Suffix “H”
Suffix “M”
Min.
Without derating
With derating
Without derating
With derating
Without derating
With derating
Storage temperature range
Thermal shock
Vibration
Relative humidity
EMC SPECIFICATIONS
Parameter
Conditions
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Air ± 8kV and Contact ± 6kV
10 V/m
± 2kV
±1kV
10 Vr.m.s
-40
+65
-40
+65
-40
+70
-55
Unit
VDC
Standard Type
Suffix ”H”
Suffix ”M”
Base material
Potting material
Weight
EMI(1)
ESD
Radiated immunity
Fast transient (2)
Surge (2)
Conducted immunity
Typ.
1600
3000
1600
1000
1
500VDC
Case material
MTBF
Min.
Standard Type
Suffix ”H”
Suffix ”M”
Suffix ”M”
pF
kHz
UL60950-1
EN60950-1
IEC60950-1
Non-conductive black plastic
Non-conductive black plastic
Copper
None
Silicone (UL94 V-0)
4.8g (0.17oz)
4.8g (0.17oz)
5.9g (0.21oz)
2.135 x 106 hrs
2.135 x 106 hrs
2.360 x 106 hrs
Typ.
Max.
Unit
+65
+90
+65
+90
+70
+95
+125
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Level
Class A,Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Note:
1.
2.
The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE.
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: 5 VDC input : Nippon chemi-con KY series, 330µF/50V.
Others : Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
3
www.PDUKE.com
2015/05/20
PDL06
CHARACTERISTIC CURVE
PDL06-48S05 Derating Curve
PDL06-48S05M Derating Curve
PDL06-48S05 Efficiency vs. Input Voltage
PDL06-48S05 Efficiency vs. Output Load
MECHANICAL DRAWING
Standard type, Suffix “H”
PIN CONNECTION
PIN
SINGLE
DUAL
1
-Vin
-Vin
2
+Vin
+Vin
3
Ctrl
Ctrl
5
NC*/No pin**
NC*/No pin**
6
+Vout
+Vout
7
-Vout
Common
8
NC
-Vout
*NC pin for standard type model.
**No pin for 3kVDC isolation model (suffix “H”).
1. All dimensions in inch (mm)
2. Tolerance :x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin pitch tolerance ±0.01 (0.25)
4. Pin dimension tolerance ±0.004(0.1)
Suffix “M”
PIN CONNECTION
PIN
SINGLE
1
-Vin
2
+Vin
3
Ctrl
5
NC
6
+Vout
7
-Vout
8
NC
9
Case
10
Stand off
11
Stand off
12
Case
DUAL
-Vin
+Vin
Ctrl
NC
+Vout
Common
-Vout
Case
Stand off
Stand off
Case
1. All dimensions in inch (mm)
2. Tolerance :x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin pitch tolerance ±0.01 (0.25)
4. Pin dimension tolerance ±0.004(0.1)
4
www.PDUKE.com
2015/05/20