PDL06W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 6 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE 0.86 X 0.36 X 0.44 INCH • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT : 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP SCP LOW STANDBY POWER TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 VDC 3.3 5 9 12 15 24 ±5 ±12 ±15 3.3 5 9 12 15 24 ±5 ±12 ±15 mA 1500 1200 666 500 400 250 ±600 ±250 ±200 1500 1200 666 500 400 250 ±600 ±250 ±200 mA 4 4 4 4 4 4 6 6 8 4 4 4 4 4 4 6 6 8 % 81 84 86 87 88 87 84 87 87 81 84 85 87 87 87 84 87 87 µF 2200 1100 680 470 470 180 ±680 ±330 ±180 2200 1100 680 470 470 180 ±680 ±330 ±180 PDL06-24S3P3W PDL06-24S05W PDL06-24S09W PDL06-24S12W PDL06-24S15W PDL06-24S24W PDL06-24D05W PDL06-24D12W PDL06-24D15W PDL06-48S3P3W PDL06-48S05W PDL06-48S09W PDL06-48S12W PDL06-48S15W PDL06-48S24W PDL06-48D05W PDL06-48D12W PDL06-48D15W PART NUMBER STRUCTURE PDL06 - 48 Series Name Input Voltage (VDC) 24: 9~36 48:18~75 S Output Quantity S:Single D: Dual 1 05 W Output Voltage (VDC) 3P3: 3.3 05: 5 09: 9 12:12 15:15 24:24 H Input Range Case & Isolation Option 4:1 : Standard type Plastic case 1600VDC isolation H: Plastic case 3000VDC isolation M: Metal case 1600VDC isolation 05:± 5 12:±12 15:±15 www.PDUKE.com 2014/06/26 PDL06W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Constant resistive load Input surge voltage 1 second, max. 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Input reflected ripple current Input filter Remote ON/OFF DC-DC ON DC-DC OFF Remote off input current Ctrl pin applied current via 1kΩ Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection Low Line to High Line at Full Load No Load to Full Load VDC ms 50 100 VDC 20 mAp-p 40 Capacitor type Open or high impedance 3 4 mA 2.5 mA 2 Typ. -1.0 -0.2 -0.5 -1.0 -5.0 Max. Unit +1.0 +0.2 +0.5 +1.0 +5.0 % % 50 75 Input to Output Standard Type Suffix ”H” Suffix ”M” Suffix ”M” 500VDC Min. 522 Standard Type Suffix ”H” Suffix ”M” MIL-HDBK-217F % mVp-p ℃ Typ. Standard Type Suffix ”H” Suffix ”M” Standard Type Suffix ”H” Suffix ”M” www.PDUKE.com Max. 1600 3000 1600 1000 1 Unit VDC GΩ Standard Type Suffix ”H” Suffix ”M” Base material Potting material Weight % +0.02 %/ 250 µs 180 % Continuous, automatics recovery Conditions 1 minute Case material 2 Unit 36 75 -0.02 25% load step change % of Iout rated; Hiccup mode Switching frequency Safety approvals MTBF Max. 24 48 30 30 Min. Single Dual Dual 3.3Vout 5Vout, 9Vout 12Vout, 15Vout 24Vout Asymmetrical load 25%/100% FL 20MHz bandwidth Input (Output) to Case Isolation resistance Isolation capacitance Typ. 9 18 DC-DC OFF Conditions GENERAL SPECIFICATIONS Parameter Isolation voltage Min. 580 50 50 50 638 pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Copper None Silicone (UL94 V-0) 4.8g (0.17oz) 4.8g (0.17oz) 5.9g (0.21oz) 2.928 x 106 hrs 2.928 x 106 hrs 3.161 x 106 hrs 2014/06/26 PDL06W ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Conditions Standard type Suffix “H” Suffix “M” Min. Without derating With derating Without derating With derating Without derating With derating Storage temperature range Thermal shock Vibration Relative humidity EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Typ. -40 +71 -40 +71 -40 +75 -55 Max. Unit +71 +100 +71 +100 +75 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH ℃ ℃ Level Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ±2kV 10 Vr.m.s , Class A Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggested: The PDL06-24W recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ70A, 70V, 3000Watt peak pulse power) to connect in parallel. The PDL06-48W recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A, 120V, 3000Watt peak pulse power) to connect in parallel. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE 3 PDL06-48S05W Derating Curve PDL06-48S05WM Derating Curve PDL06-48S05W Efficiency vs. Input Voltage PDL06-48S05W Efficiency vs. Output Load www.PDUKE.com 2014/06/26 PDL06W MECHANICAL DRAWING Standard type, Suffix “H” PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 Ctrl Ctrl 5 NC*/No pin** NC*/No pin** 6 +Vout +Vout 7 -Vout Common 8 NC -Vout *NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) Suffix “M” PIN CONNECTION PIN SINGLE 1 -Vin 2 +Vin 3 Ctrl 5 NC 6 +Vout 7 -Vout 8 NC 9 Case 10 Stand off 11 Stand off 12 Case DUAL -Vin +Vin Ctrl NC +Vout Common -Vout Case Stand off Stand off Case 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2014/06/26