PDL06 SERIES DC-DC CONVERTER 2:1 ULTRA WIDE INPUT RANGE UP TO 6Watts FEATURES APPLICATIONS • SIP PACKAGE, 0.86 x 0.36x 0.44 INCH • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • CONTINUOUS SHORT CIRCUIT PROTECTION • SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1 • CE MARK MEETS 2006/95/EC, 2011/95/EC and 2004/108/EC • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU WIRELESS NETWORK TELECOM/DATACOM INDUSTRY CONTROL SYSTEM MEASUREMENT EQUIPMENT SEMICONDUCTOR EQUIPMENT TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 ºC otherwise noted Model Number Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 9 12 15 24 ±5 ±12 ±15 3.3 5 9 12 15 24 ±5 ±12 ±15 3.3 5 9 12 15 24 ±5 ±12 ±15 3.3 5 9 12 15 24 ±5 ±12 ±15 mA 1300 1200 666 500 400 250 ±600 ±250 ±200 1300 1200 666 500 400 250 ±600 ±250 ±200 1300 1200 666 500 400 250 ±600 ±250 ±200 1300 1200 666 500 400 250 ±600 ±250 ±200 mA 65mA 105mA 105mA 105mA 105mA 105mA 105mA 105mA 105mA 40mA 55mA 55mA 55mA 55mA 55mA 55mA 55mA 55mA 20mA 28mA 28mA 28mA 28mA 28mA 28mA 28mA 28mA 14mA 14mA 14mA 14mA 14mA 14mA 14mA 14mA 14mA % 77 81 83 84 84 84 81 84 84 78 83 85 85 85 84 82 84 85 78 83 85 86 86 85 82 85 85 78 82 84 85 86 84 82 84 85 µF 6600 3300 2000 1600 1400 680 ±2000 ±900 ±660 6600 3300 2000 1600 1400 680 ±2000 ±900 ±660 6600 3300 2000 1600 1400 680 ±2000 ±900 ±660 6600 3300 2000 1600 1400 680 ±2000 ±900 ±660 PDL06-05S3P3 PDL06-05S05 PDL06-05S09 PDL06-05S12 PDL06-05S15 PDL06-05S24 PDL06-05D05 PDL06-05D12 PDL06-05D15 PDL06-12S3P3 PDL06-12S05 PDL06-12S09 PDL06-12S12 PDL06-12S15 PDL06-12S24 PDL06-12D05 PDL06-12D12 PDL06-12D15 PDL06-24S3P3 PDL06-24S05 PDL06-24S09 PDL06-24S12 PDL06-24S15 PDL06-24S24 PDL06-24D05 PDL06-24D12 PDL06-24D15 PDL06-48S3P3 PDL06-48S05 PDL06-48S09 PDL06-48S12 PDL06-48S15 PDL06-48S24 PDL06-48D05 PDL06-48D12 PDL06-48D15 PART NUMBER STRUCTURE PDL06 - 48 Series Name Input Voltage (VDC) 05:4.5~9 12:9~18 24:18~36 48:36~75 S Output Quantity 05 Output Voltage (VDC) S:Single 3P3:3.3 05:5 09:9 12:12 15:15 24:24 D: Dual 05:±5 12:±12 15:±15 H Assembly Option :Standard H:Plastic case with 3000VDC isolation M:Metal case with 1600VDC isolation PDL06 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 1 second, max. Input reflected ripple current(1) Input filter Remote ON/OFF Referenced to –INPUT pin and CTRL pin applied current OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection 1 minute Input (Output) to Case Isolation resistance Isolation capacitance Min. Standard Type Suffix ”H” Suffix ”M” Suffix ”M” Standard Type Suffix ”H” Suffix ”M” MTBF Standard Type Suffix ”H” Suffix ”M” Page 1 of 4 Standard Type Suffix ”H” Suffix ”M” BELLCORE TR-NWT-000332 Case 1: 50% Stress, Ta= 40 . Standard Type MIL-HDBK-217F Ta=25 , Full load Suffix ”H” (G/B, controlled environment) Suffix ”M” ℃ www.pduke.com ms VDC mAp-p Max. Unit +1.0 +0.2 +1.0 +1.0 +5.0 75 +0.02 % % Typ. Max. % ℃ ℃ Unit VDC GΩ 50 50 50 Base material Potting material Dimensions Weight VDC VDC 1600 3000 1600 1000 1 500VDC Switching frequency Design meet safety standard Case material VDC % mVp-p -0.02 %/ 500 µs Continuous, automatics recovery 50 Conditions Input to Output Typ. -1.0 -0.2 -1.0 -1.0 -5.0 Single Dual Dual Unit Capacitor type Open or high impedance mA 2 3 4 2.5 mA Min. 25% load step change Isolation voltage 9 18 36 75 4.5 9 18 36 30 30 30 30 Low Line to High Line at Full Load GENERAL SPECIFICATIONS Parameter Max. 5 12 24 48 15 25 50 100 Conditions Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Typ. 4.5 9 18 36 3.5 7 15 33 30 30 DC-DC ON DC-DC OFF Remote off input current No Load to Full Load Min. pF 100 kHz IEC60950-1, UL60950-1, EN60950-1 Non-conductive black plastic Non-conductive black plastic Copper None Silicon (UL94-V0) 0.86 X 0.36 X 0.44 Inch (21.8 X 9.1 X 11.2 mm) 4.8g (0.17oz) 4.8g (0.17oz) 5.9g (0.21oz) 2.097 x 106 hrs 7.705 x 105 hrs 7.705 x 105 hrs 9.987 x 105 hrs 2013/04/19 PDL06 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Standard Type Suffix ”H” Suffix ”M” Standard Type Without derating Storage temperature range Min. Typ. -40 -40 -40 -55 Max. +65 +65 +70 +125 Thermal shock Vibration Relative humidity Unit ℃ ℃ ℃ ℃ MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions EMI (1) EN55022 ESD EN61000-4-2 Radiated immunity Fast transient (2) Surge (2) Conducted immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A, ClassB Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The PDL06 series standard module meets EMI Class A or Class B and input reflected ripple current only with external components. For more detail information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: 5 VDC input : Nippon chemi-con KY series, 330µF/50V. Others : Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE Page 2 of 4 PDL06-48S05 Derating Curve PDL06-48S05-M Derating Curve PDL06-48S05 Efficiency VS Input Voltage PDL06-48S05 Efficiency VS Output Load www.pduke.com 2013/04/19 PDL06 MECHANICAL DRAWING Standard plastic case PIN CONNECTION PIN SINGLE DUAL 1 -INPUT -INPUT 2 +INPUT +INPUT 3 CTRL CTRL 5 NC*/NO PIN** NC*/NO PIN** 6 +OUTPUT +OUTPUT 7 -OUTPUT COMMON 8 NC -OUTPUT *NC pin for standard. **NO pin for 3KV isolation. (P/N suffix ”H”) 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Option suffix “M” metal case PIN 1 2 3 5 6 7 8 9 10 11 12 PIN CONNECTION SINGLE DUAL -INPUT -INPUT +INPUT +INPUT CTRL CTRL NC NC +OUTPUT +OUTPUT -OUTPUT COMMON NC -OUTPUT CASE CASE STAND OFF STAND OFF STAND OFF STAND OFF CASE CASE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Page 3 of 4 www.pduke.com 2013/04/19