RR7-S06/D06 6 Watt 4:1 regulated single & dual output DIP24, wide 4:1 input range Full SMD technology ■ 1500 VDC isolation up to 3500 VDC isolation ■ Continuous short circuit protection ■ Efficiency up to 84% ■ -40°C~85°C operation temperature range ■ Optional Plastic case ■ EMI complies with EN55022 Class A ■ ■ OUTPUT SPECIFICATIONS EMC SPECIFICATIONS Voltage accuracy Line regulation Load regulation Radiated Emissions Conducted Emissions ESD RS EFT CS PFMF ± 1% ± 0.5% ± 0.5% (Output 3.3V / ±3.3V Model) ± 1.5% Ripple & Noise (20 MHz bandwith) (1) 60 mV pk-pk Short circuit protection Indefinite (automatic recovery) Temperature coefficient ± 0.02%/°C Capacitor load (2) See table (4) EN55022 EN55022 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 IEC61000-4-8 Class A Class A Perf. crit. B Perf. crit. A Perf. crit. B Perf. crit. A Perf. crit. A ABSOLUTE MAXIMUM RATINGS (4) INPUT SPECIFICATIONS Voltage range Max. input current No-load input current Input filter Input reflected ripple current (3) See table See table See table PI Type 35 mA pk-pk These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Input voltage (100 mS) 24 modes -0.7 ~ 40 VDC 48 modes -0.7 ~ 80 VDC Lead soldering temperature 260°C (1.5 mm from case 10 sec.) GENERAL SPECIFICATIONS Efficiency (typ.) See table I/O isolation voltage (3 sec.) Input/Output 1500 ~ 3500 VDC Metal case / input & output 1000 VDC I/O isolation capacitance 500 pF typ. I/O isolation resistance 1000 M Ohm Switching frequency typ. 266 kHz Humidity 95% rel. H Reliability calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs. Safety standard (designed to meet) IEC 60950-1: 2001 PHYSICAL SPECIFICATIONS Case material Base material Pin material Potting material Weight Dimensions Nickel-coated copper Non-conductive black plastic (UL94V-0 rated) Non-conductive black plastic (UL94V-0 rated) Ø 0.5 mm brass solder-coated Epoxy (UL94V-0 rated) Metal 17.0 g, Plastic 13.5 g 1.25“ x 0.8“ x 0.4“ ENVIRONMENT SPECIFICATIONS Operating temperature (See derating curve) -40°C~ 85°C Maximum case temperature 100°C Storage temperature -40°C~125°C Cooling Nature convection All specifications typical at Ta = 25°C, nominal input voltage and full load unless otherwise specified. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, we accept no responsibility for consequences arising from printing errors or inaccuracies. Subject to change without notice. NOTE 1) Typical value at nominal input voltage and full load. 2) Tested by nominal Vin and constant resistor load. 3) Measured input reflected ripple current with a simulated source inductance of 12uH. 4) Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5) It´s recommended to add C1 (68 F), C2 (33 F), L (12 H) in input end to achieve EN55022 conducted Class A. The models listed are just for standard type. If you need a special specification product, please contact our service. Phone: +49 69 984047-0, mail to: [email protected] or use the forms on www.rsg-electronic.de („Kontakt“). Page: 1/3 Last update: 18.02.10 RR7-S06/D06 6 Watt 4:1 regulated single & dual output NUMBER STRUCTURE RR7 - XX XX DERATING CURVE S 06 Name/Package RR7=DIL24 A Output Power 03=3.3V 06=6W 05=5V Input 07=7.2V Type 24=9~36V 09=9V S=Single 48=18~72V 12=12V D=Dual 15=15V 18=18V 24=24V 1 (P)* Code internal Isolation 1=1.5 kVDC 3=3.5 kVDC * Standard version in Metal case. Add suffix „P“ for Plastic case! MODEL SELECTION GUIDE Model Number Input Range VDC Input current (mA) No Load / Full Load Output VDC Output current Full Load (mA) Efficiency @FL (%) Capacitor Load (HF) RR7-2403S06AX RR7-2405S06AX RR7-2407S06AX RR7-2409S06AX RR7-2412S06AX RR7-2415S06AX RR7-2418S06AX RR7-2424S06AX RR7-2403D06AX RR7-2405D06AX RR7-2407D06AX RR7-2409D06AX RR7-2412D06AX RR7-2415D06AX RR7-2418D06AX RR7-2424D06AX RR7-4803S06AX RR7-4805S06AX RR7-4807S06AX RR7-4809S06AX RR7-4812S06AX RR7-4815S06AX RR7-4818S06AX RR7-4824S06AX RR7-4803D06AX RR7-4805D06AX RR7-4805D06AX RR7-4809D06AX RR7-4812D06AX RR7-4815D06AX RR7-4818D06AX RR7-4824D06AX 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 12 / 253.3 10 / 312.5 18 / 312.5 12 / 301.2 15 / 301.2 18 / 301.2 15 / 301.2 18 / 304.9 12 / 337.8 10 / 312.5 18 / 312.5 18 / 308.64 20 / 301.2 22 / 304.9 18 / 304.9 18 / 312.5 15 / 126.4 8 / 156.25 15 / 156.25 10 / 152.43 10 / 150.6 10 / 148.8 10 / 150.6 12 / 150.6 10 / 162.3 10 / 158.22 15 / 156.25 15 / 154.32 10 / 152.4 15 / 148.8 15 / 156.25 15 / 154.3 3.3 5 7.2 9 12 15 18 24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 3.3 5 7.2 9 12 15 18 24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 1400 1200 833 666 500 400 333 250 ±909 ±600 ±416 ±333 ±250 ±200 ±166 ±125 1400 1200 833 666 500 400 333 250 ±909 ±600 ±416 ±333 ±250 ±200 ±166 ±125 76 80 80 83 83 83 83 82 74 80 80 81 83 82 82 80 76 80 80 82 83 84 83 83 77 79 80 81 82 84 80 81 1000 1000 470 220 1000 470 47 47 ±470 ±680 ±220 ±100 ±330 ±100 ±10 ±22 1000 1000 470 220 1000 100 10 22 ±330 ±470 ±220 ±100 ±100 ±47 ±22 ±22 Page: 2/3 Last update: 18.02.10 RR7-S06/D06 6 Watt 4:1 regulated single & dual output EFFICIENCY VS OUTPUT CURRENT 24 EFFICIENCY VS OUTPUT CURRENT 48 24 MODELS 48 MODELS MECHANICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS RSG ■ RSG RR7-XXXXX06AX(P) ■ RR7-XXXXX06AX DIL 24 package Metal case PIN CONNECTIONS Pin Number Single Dual 2 3 9 11 14 16 22 23 -V Input -V Input N.P. N.C. +V Output -V Output +V Input +V Input -V Input -V Input Common -V Output +V Output Common +V Input +V Input DIL 24 package Plastic case („P“) Notes: All dimensions are typical in mm (inches). 1) Pin diameter: 0.5 ± 0.05 (0.02 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (± 0.02) The Pin connections for High Isolation models are the same as normal ones! Page: 3/3 Last update: 18.02.10 RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach Tel. +49 69 984047-0 Fax +49 69 984047-77 mail: [email protected] www.rsg-electronic.de