RS2/RD2-S05/D05 0.5 Watt unregulated single & dual output 7 Pin SIP7 / 14 Pin DIP14 package 1000 VDC isolation up to 6000 VDC isolation ■ Low ripple and noise ■ Efficiency up to 80% ■ -40°C~85°C operation temperature range ■ Non-conductive black plastic case ■ ■ SIL 7 package, pic. similar OUTPUT SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS (4) Voltage accuracy Line regulation (Per 1% Vin Charge) Load regulation (From 20% to 100% Load) ± 3% ± 1.2% ± 10% ± 20% 75 mV pk-pk ± 0.02%/°C See table (Output 3.3 V Model) Ripple & Noise (20 MHz bandwith) (1) Temperature coefficient Capacitor load (2) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Input voltage (100 mS) 5 modes 0 ~ 7 VDC 12 modes 0 ~ 15 VDC 24 modes 0 ~ 28 VDC 48 modes (SIP) 0 ~ 54 VDC Lead soldering temperature 260°C (1.5 mm from case 10 sec.) INPUT SPECIFICATIONS Voltage range Max. input current No-load input current Input filter Input reflected ripple current (3) ± 10% See table See table Capacitors 20 mA pk-pk All specifications typical at Ta = 25°C, nominal input voltage and full load unless otherwise specified. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, we accept no responsibility for consequences arising from printing errors or inaccuracies. Subject to change without notice. GENERAL SPECIFICATIONS NOTE Efficiency See table I/O isolation voltage (3 sec.) Input / output 1000 ~ 6000 VDC I/O isolation capacitance 60 pF typ. I/O isolation resistance 1000 M Ohm Switching frequency variable 80 kHz Humidity 95% rel. H Reliability calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs. Safety standard (designed to meet) IEC 60950-1 1) Ripple / Noise measured with 20 MHz bandwith. 2) Tested by minimal Vin and constant resistive load. 3) Measured input reflected ripple current with a simulated source inductance of 12uH. 4) Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5) Operation under no-load conditions will not damage these devices. However they may not meet all listed specifications. PHYSICAL SPECIFICATIONS Case material Pin material Potting material Weight Dimensions Non-conductive black plastic (UL94V-0 rated) 0.5 mm Alloy42 solder-coated Epoxy (UL94V-0 rated) SIP > 2.3 g, DIP > 2.6 g SIP > 0.76“ x 0.24“ x 0.39“ DIP > 0.80“ x 0.40“ x 0.27“ The models listed are just for standard type. If you need a special specification product, please contact our service. Phone: +49 69 984047-0, mail to: [email protected] or use the forms on www.rsg-electronic.de („Kontakt“). ENVIRONMENT SPECIFICATIONS Operating temperature Maximum case temperature Storage temperature Cooling -40°C~ 85°C (See derating curve) 100°C -40°C~125°C Nature convection Page: 1/5 Last update: 23.01.09 RS2/RD2-S05/D05 0.5 Watt unregulated single & dual output NUMBER STRUCTURE RS2 - XX Name/Package RS2=SIL7 RD2=DIL14 Input 05=5V 12=12V 24=24V 48=48V XX Output 03=3.3V 05=5V 07=7.2V 09=9V 12=12V 15=15V 18=18V 24=24V DERATING CURVE S 05 Power 05=0.5W A X Code internal Type S=Single D=Dual Isolation 1=1.0 kVDC 2=2.0 kVDC 3=3.0 kVDC 4=4.0 kVDC 5=5.2 kVDC 6=6.0 kVDC MODEL SELECTION GUIDE Model Number Input Range VDC Input current (mA) No Load / Full Load Output VDC Output current Full Load (mA) Efficiency @FL (%) Capacitor Load (HF) RS2-0503D05AX RS2-0505D05AX RS2-0507D05AX RS2-0509D05AX RS2-0512D05AX RS2-0515D05AX RS2-0518D05AX RS2-0524D05AX RS2-1203D05AX RS2-1205D05AX RS2-1207D05AX RS2-1209D05AX RS2-1212D05AX RS2-1215D05AX RS2-1218D05AX RS2-1224D05AX RS2-2403D05AX RS2-2405D05AX RS2-2407D05AX RS2-2409D05AX RS2-2412D05AX RS2-2415D05AX RS2-2418D05AX RS2-2424D05AX RS2-4803D05AX RS2-4805D05AX RS2-4807D05AX RS2-4809D05AX RS2-4812D05AX RS2-4815D05AX RS2-4818D05AX RS2-4824D05AX 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 24 24 24 24 24 24 24 24 48 48 48 48 48 48 48 48 30 / 166 30 / 135 30 / 129 30 / 128 30 / 128 30 / 128 30 / 126 30 / 126 20 / 69 20 / 56 20 / 54 20 / 53 20 / 53 20 / 53 20 / 52 20 / 52 10 / 35 10 / 28 10 / 27 10 / 27 10 / 26 10 / 26 10 / 26 10 / 26 6 / 17 6 / 14 6 / 13 6 / 13 6 / 13 6 / 13 6 / 13 6 / 13 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 60 74 77 78 78 78 79 79 60 74 77 78 78 78 80 80 60 74 76 76 78 78 78 80 60 74 76 76 76 77 77 79 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 Page: 2/5 Last update: 23.01.09 RS2/RD2-S05/D05 0.5 Watt unregulated single & dual output MODEL SELECTION GUIDE Model Number Input Range VDC Input current (mA) No Load / Full Load Output VDC Output current Full Load (mA) Efficiency @FL (%) Capacitor Load (HF) RD2-0503D05AX RD2-0505D05AX RD2-0507D05AX RD2-0509D05AX RD2-0512D05AX RD2-0515D05AX RD2-0518D05AX RD2-0524D05AX RD2-1203D05AX RD2-1205D05AX RD2-1207D05AX RD2-1209D05AX RD2-1212D05AX RD2-1215D05AX RD2-1218D05AX RD2-1224D05AX RD2-2403D05AX RD2-2405D05AX RD2-2407D05AX RD2-2409D05AX RD2-2412D05AX RD2-2415D05AX RD2-2418D05AX RD2-2424D05AX RS2-0503S05AX RS2-0505S05AX RS2-0507S05AX RS2-0509S05AX RS2-0512S05AX RS2-0515S05AX RS2-0518S05AX RS2-0524S05AX RS2-1203S05AX RS2-1205S05AX RS2-1207S05AX RS2-1209S05AX RS2-1212S05AX RS2-1215S05AX RS2-1218S05AX RS2-1224S05AX RS2-2403S05AX RS2-2405S05AX RS2-2407S05AX RS2-2409S05AX RS2-2412S05AX RS2-2415S05AX RS2-2418S05AX RS2-2424S05AX 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 24 24 24 24 24 24 24 24 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 24 24 24 24 24 24 24 24 30 / 166 30 / 135 30 / 129 30 / 128 30 / 128 30 / 128 30 / 126 30 / 126 20 / 69 20 / 56 20 / 54 20 / 53 20 / 53 20 / 53 20 / 52 20 / 52 10 / 35 10 / 28 10 / 27 10 / 27 10 / 26 10 / 26 10 / 26 10 / 26 30 / 142 30 / 135 30 / 135 30 / 133 30 / 131 30 / 131 30 / 131 30 / 128 20 / 59 20 / 57 20 / 56 20 / 55 20 / 54 20 / 54 20 / 54 20 / 53 10 / 29 10 / 28 10 / 28 10 / 28 10 / 27 10 / 26 10 / 26 10 / 26 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 ±75.7 ±50 ±34.7 ±27.7 ±20.8 ±16.7 ±13.9 ±10.4 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 60 74 77 78 78 78 79 79 60 74 77 78 78 78 80 80 60 74 76 76 78 78 78 80 70 74 74 75 76 76 76 78 70 73 74 75 76 76 76 78 70 73 74 75 76 78 78 78 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 Page: 3/5 Last update: 23.01.09 RS2/RD2-S05/D05 0.5 Watt unregulated single & dual output MODEL SELECTION GUIDE Model Number Input Range VDC Input current (mA) No Load / Full Load Output VDC Output current Full Load (mA) Efficiency @FL (%) Capacitor Load (HF) RS2-4803S05AX RS2-4805S05AX RS2-4807S05AX RS2-4809S05AX RS2-4812S05AX RS2-4815S05AX RS2-4818S05AX RS2-4824S05AX RD2-0503S05AX RD2-0505S05AX RD2-0507S05AX RD2-0509S05AX RD2-0512S05AX RD2-0515S05AX RD2-0518S05AX RD2-0524S05AX RD2-1203S05AX RD2-1205S05AX RD2-1207S05AX RD2-1209S05AX RD2-1212S05AX RD2-1215S05AX RD2-1218S05AX RD2-1224S05AX RD2-2403S05AX RD2-2405S05AX RD2-2407S05AX RD2-2409S05AX RD2-2412S05AX RD2-2415S05AX RD2-2418S05AX RD2-2424S05AX 48 48 48 48 48 48 48 48 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 24 24 24 24 24 24 24 24 6 / 14 6 / 14 6 / 14 6 / 14 6 / 14 6 / 13 6 / 13 6 / 13 30 / 142 30 / 135 30 / 135 30 / 133 30 / 131 30 / 131 30 / 131 30 / 128 20 / 59 20 / 57 20 / 111 20 / 55 20 / 54 20 / 54 20 / 54 20 / 53 10 / 29 10 / 28 10 / 28 10 / 28 10 / 27 10 / 26 10 / 26 10 / 26 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 151.5 100 69.4 55.5 41.6 33.3 27.8 20.8 70 72 72 74 74 75 75 77 70 74 74 75 76 76 76 78 70 73 74 75 76 76 76 78 70 73 74 75 76 78 78 78 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 LOADING VS OUTPUT VOLTAGE LOADING VS OUTPUT VOLTAGE 12 MODELS Output Voltage Output Voltage 5 MODELS Load Load Page: 4/5 Last update: 23.01.09 RS2/RD2-S05/D05 0.5 Watt unregulated single & dual output LOADING VS OUTPUT VOLTAGE LOADING VS OUTPUT VOLTAGE 48 MODELS Output Voltage Output Voltage 24 MODELS Load Load MECHANICAL SPECIFICATIONS 7 Pin SIL PIN CONNECTIONS 7 Pin SIL MECHANICAL SPECIFICATIONS 14 Pin DIL PIN CONNECTIONS 14 Pin DIL Notes: All dimensions are typical in millimeters (inches). 1) Pin diameter: 0.5 ± 0.05 (0.02 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (± 0.02) RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach Page: 5/5 Last update: 23.01.09 Tel. +49 69 984047-0 Fax +49 69 984047-77 mail: [email protected] www.rsg-electronic.de