S2A - S2M General-Purpose Rectifiers (Glass Passivated) Features Description • High-Current Capability, 2 A Rated The S2 family of devices are general-purpose 2 A rated rectifiers with voltage ratings ranging from 50 to 1000 V. They are implemented in traditional SMB packages and are well known to the industry. For advanced or special requirements, please contact a Fairchild Semiconductor representative. • Fast Response: 2 μs Trr • Low-Forward Voltage Drop, 1.15 V VF Max at 2 A • High-Surge Current Capability, 50 A2s IFSM • Glass Passivated Junction • RoHS Compliant • UL Certified, UL #E258596 Applications • Power Supplies SMB/DO-214AA • AC to DC Rectification COLOR BAND DENOTES CATHODE • Bypass Diodes Ordering Information Part Number Marking S2A S2A S2B S2B S2D S2D S2G S2G S2J S2J S2K S2K S2M S2M © 2001 Fairchild Semiconductor Corporation S2A - S2M Rev. 1.10 Package Packing Method DO-214AA (SMB) Tape and Reel www.fairchildsemi.com S2A - S2M — General-Purpose Rectifiers (Glass Passivated) May 2015 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Value Parameter S2A S2B S2D S2G 100 200 400 S2K S2M 600 800 1000 Unit VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current at TA = 100°C 2.0 A IFSM Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine Wave 50 A TSTG Storage Temperature Range -65 to +150 °C Operating Junction Temperature -65 to +150 °C Value Unit TJ 50 S2J V Thermal Characteristics Values are at TA = 25°C unless otherwise noted. Symbol PD RθJA Parameter Power Dissipation Thermal Resistance, Junction to Ambient(1) 2.35 W 53 °C/W Note: 1. Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Symbol Parameter Conditions Value S2A S2B S2D S2G S2J S2K S2M Unit VF Maximum Forward Voltage IF = 2.0 A 1.15 V trr Typical Reverse-Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 2.0 μs IR Maximum Reverse Current at Rated VR CT Typical Total Capacitance TA = 25°C 1.0 TA = 125°C 125 VR = 4.0 V, f = 1.0 MHz 30 © 2001 Fairchild Semiconductor Corporation S2A - S2M Rev. 1.10 μA pF www.fairchildsemi.com 2 S2A - S2M — General-Purpose Rectifiers (Glass Passivated) Absolute Maximum Ratings Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] 2 1.5 1 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED 8.0 x 8.0 mm COPPER PAD AREAS 0.5 0 0 25 50 75 100 125 Ambient Temperature [ºC] 150 175 50 40 30 20 10 0 1 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 2. Non-Repetitive Surge Current Figure 1. Forward Current Derating Curve 10 10 Reverse Current, IR [uA] Forward Current, IF [A] T A = 125 ºC 1 0.1 TA = 25º C μs Pulse Width = 300μ 2% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 Forward Voltage, VF [V] 1 T A = 100 ºC 0.1 TA = 25º C 0.01 1.4 1.6 Figure 3. Forward Voltage Characteristics 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs. Reverse Voltage Total Capacitance, C T [pF] 100 50 20 10 5 2 1 0.1 0.2 0.5 1 2 5 10 20 Reverse Voltage, V R [V] 50 100 Figure 5. Total Capacitance © 2001 Fairchild Semiconductor Corporation S2A - S2M Rev. 1.10 www.fairchildsemi.com 3 S2A - S2M — General-Purpose Rectifiers (Glass Passivated) Typical Performance Characteristics B 5.60 5.08 B 0.13 C B A M 2.50 3.95 3.30 2.20 1.91 B 2.20 4.70 B A 4.75 4.05 LAND PATTERN RECOMMENDATION 8° 0° 2.65 MAX A R0.15 4X 2.45 1.90 GAUGE PLANE 0.45 B C 2.15 1.65 0.30 0.05 0.203 0.050 0.13 M 0.41 0.15 0 -8° C B A NOTES: 1.60 0.75 DETAIL A SCALE 20 : 1 A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. LAND PATTERN STD. DIOM5336X240M. G. DRAWING FILE NAME: DO214AAREV1 Figure 6. 2-LEAD, SMB, JEDEC DO-214, VARIATION AA © 2001 Fairchild Semiconductor Corporation S2A - S2M Rev. 1.10 www.fairchildsemi.com 4 S2A - S2M — General-Purpose Rectifiers (Glass Passivated) Physical Dimensions TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ MotionGrid® MTi® MTx® MVN® mWSaver® OptoHiT¥ OPTOLOGIC® AccuPower¥ AttitudeEngine™ Awinda® AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® ® Fairchild Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ OPTOPLANAR® ® Power Supply WebDesigner¥ PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ ®* TinyBoost® TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* μSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ Xsens™ ❺™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or intended for surgical implant into the body or (b) support or sustain system whose failure to perform can be reasonably expected to life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I74 © Fairchild Semiconductor Corporation www.fairchildsemi.com