MPSA06 / MMBTA06 / PZTA06 NPN General-Purpose Amplifier Features • This device is designed for general-purpose amplifier applications at collector currents to 300 mA. • Sourced from process 12. MPSA06 MMBTA06 PZTA06 C C E E C B TO-92 B SOT-23 SOT-223 Mark: 1G E B C Ordering Information Part Number Top Mark Package Packing Method MPSA06 MPSA06 TO-92 3L Bulk MMBTA06 1G SOT-23 3L Tape and Reel PZTA06 A06 SOT-223 4L Tape and Reel Absolute Maximum Ratings(1), (2) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value Unit 80 V VCEO Collector-Emitter Voltage VCBO Collector-Base Voltage 80 V VEBO Emitter-Base Voltage 4.0 V Collector Current - Continuous 500 mA -55 to +150 °C IC TJ, TSTG Operating and Storage Junction Temperature Range Notes: 1. These ratings are based on a maximum junction temperature of 150°C. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty-cycle operations. © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 www.fairchildsemi.com MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier September 2014 Values are at TA = 25°C unless otherwise noted. Symbol Max. Parameter Unit MPSA06 MMBTA06(3) PZTA06(4) Total Device Dissipation 625 350 1000 mW Derate Above 25°C 5.0 2.8 8.0 mW/°C RθJC Thermal Resistance, Junction-to-Case 83.3 RθJA Thermal Resistance, Junction-to-Ambient 200 357 125 PD °C/W °C/W Notes: 3. Device is mounted on FR-4 PCB 1.6 inch x 1.6 inch x 0.06 inch. 4. Device is mounted on FR-4 PCB 36 mm x 18 mm x 1.5 mm, mounting pad for the collector lead minimum 6 cm2. Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Symbol Parameter Conditions Min. Max. Unit Off Characteristics V(BR)CEO Collector-Emitter Breakdown Voltage(5) IC = 1.0 mA, IB = 0 80 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 100 μA, IC = 0 4.0 V ICEO Collector Cut-Off Current VCE = 60 V, IB = 0 0.1 μA ICBO Collector Cut-Off Current VCB = 80 V, IE = 0 0.1 μA On Characteristics hFE DC Current Gain IC = 10 mA, VCE = 1.0 V 100 IC = 100 mA, VCE = 1.0 V 100 VCE(sat) Collector-Emitter Saturation Voltage IC = 100 mA, IB = 10 mA 0.25 V VBE(on) Base-Emitter On Voltage IC = 100 mA, VCE = 1.0 V 1.2 V Small Signal Characteristics fT Current Gain - Bandwidth Product IC = 10 mA, VCE = 2.0 V, f = 100 MHz 100 MHz Notes: 5. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2%. © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 www.fairchildsemi.com 2 MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Thermal Characteristics β V CESAT - COLLECTOR EMITTE R VOLTAGE (V) h FE- TYP ICAL PULSED CURRE NT GAIN 200 VCE = 1V 125 °C 150 25 °C 100 - 40 °C 50 0.001 IC 0.01 0.1 - COLLECTOR CURRENT (A) - 40 °C 0.8 25 °C 125 °C 0.6 0.4 1 10 100 I C - COLLECTOR CURRE NT (mA) 0.4 0.3 1000 - 40 °C 0 0.1 1 10 100 I C - COLLECTOR CURRE NT (mA) 1000 1 - 40 °C 0.8 25 °C 0.6 125 °C 0.4 VCE = 5V 0.2 0 1 10 100 I C - COLLECTOR CURRE NT (mA) 1000 Figure 4. Base-Emitter On Voltage vs. Collector Current 2.0 10 VCE(SAT), Collector Emitter Voltage (V) I CBO - COLLE CTOR CURRENT (nA) 25 °C 0.1 Figure 3. Base-Emitter Saturation Voltage vs. Collector Current VCB = 80 V 1 0.1 0.01 0.001 25 125 °C 0.2 V BEON - BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EMITTE R VOLTAGE (V) β = 10 0.1 β = 10 Figure 2. Collector-Emitter Saturation Voltage vs. Collector Current Figure 1. Typical Pulsed Current Gain vs. Collector Current 1 0.5 50 75 100 T A - AMBIE NT TEMP ERATURE (° C) 125 IC=10mA 1.6 IC=50mA 1.4 IC=100mA 1.2 IC=250mA 1.0 IC=500mA 0.8 0.6 0.4 0.2 0.0 0.01 0.1 1 10 IB - Base Current (mA) Figure 5. Collector Cut-Off Current vs. Ambient Temperature © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 1.8 Figure 6. Collector Saturation Region www.fairchildsemi.com 3 MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Typical Performance Characteristics f = 1.0 MHz CAPACITANCE (pF) BV CER - BREAKDOWN VOLTAGE (V) 100 117 116 115 114 113 C ib 10 Cob 1 112 111 0.1 1 10 100 0.1 0.1 1000 RESISTANCE (k Ω) 400 100 1 V CE = 5V P D - POWER DISSIPATION (W) f T - GAIN BANDWIDTH PRODUCT (MHz) 10 Figure 8. Input and Output Capacitance vs. Reverse Current Figure 7. Collector-Emitter Breakdown Voltage with Resistance Between Emitter-Base 350 300 250 200 150 10 20 50 100 I C - COLLECTOR CURRENT (mA) Figure 9. Gain Bandwidth Product vs. Collector Current © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 SOT-223 0.75 TO-92 0.5 SOT-23 0.25 0 100 1 1 V CE - COLLECTOR VOLTAGE (V) 0 25 50 75 100 TEMPERATURE ( o C) 125 150 Figure 10. Power Dissipation vs. Ambient Temperature www.fairchildsemi.com 4 MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Typical Performance Characteristics (Continued) MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Physical Dimensions D Figure 11. 3-LEAD, TO-92, MOLDED, STD STRAIGHT LEAD (NO EOL CODE) © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 www.fairchildsemi.com 5 MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Physical Dimensions (Continued) 0.95 2.92±0.20 3 1.40 1.30+0.20 -0.15 1 (0.29) 2 0.95 1.90 2.20 0.60 0.37 0.20 A B 1.90 1.00 LAND PATTERN RECOMMENDATION SEE DETAIL A 1.20 MAX 0.10 0.00 (0.93) 0.10 C C 2.40±0.30 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.23 0.08 A) REFERENCE JEDEC REGISTRATION TO-236, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M - 1994. E) DRAWING FILE NAME: MA03DREV10 0.25 0.20 MIN (0.55) SEATING PLANE SCALE: 2X Figure 12. 3-LEAD, SOT23, JEDEC TO-236, LOW PROFILE © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 www.fairchildsemi.com 6 MPSA06 / MMBTA06 / PZTA06 — NPN General-Purpose Amplifier Physical Dimensions (Continued) Figure 13. MOLDED PACKAGING, SOT-223, 4-LEAD © 1997 Fairchild Semiconductor Corporation MPSA06 / MMBTA06 / PZTA06 Rev. 1.1.0 www.fairchildsemi.com 7 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ MotionGrid® MTi® MTx® MVN® mWSaver® OptoHiT¥ AccuPower¥ Awinda® AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ ®* ® ® PowerTrench PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ TinyBoost® TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* μSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ Xsens™ ❺™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or intended for surgical implant into the body or (b) support or sustain system whose failure to perform can be reasonably expected to life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production © Fairchild Semiconductor Corporation Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I71 www.fairchildsemi.com