Filename: tfs 140av.doc Version 1.2 VI TELEFILTER 17.01.2007 Filter specification TFS 140AV 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 °C dBm 50 Ω || -78 pF 95 Ω || -52 pF Characteristics Remark: The nominal frequency fN is fixed at 140,0 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 140AV is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion loss (reference level) ae 10,8 Nominal frequency fN - PB Passband ± + 7,5 130,0 22,2 … fN MHz ... fN MHz ... fN MHz ... fN max. fN 13,0 ± dB 140,0 MHz 2,5 MHz 1,0 dB dB max. dB dB dB dB max. min. min. min. 1 15 40 40 dB dB dB dB 570 ns max. 825 ns ns max. 100 ns deg max. 10 deg max. 10 dBm arel Relative attenuation fN fN fN fN 0,15 Pass band ripple dB tolerance / limit ± ± + 2,5 22,2 22,2 360,0 MHz MHz MHz MHz Absolute group delay within PB 0,2 50 58 70 Group delay ripple within PB p-p 22 Phase linearity within PB p-p 3 - Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf ** - - 40 °C ... + 85 °C - - 45 °C ... + 85 °C -18 ppm/K *) The terminating impedances depend on parasites and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 140av.doc Version 1.2 VI TELEFILTER 17.01.2007 Filter specification TFS 140AV 2/5 0 1.235 -1 1.16 -16 -2 1.085 -24 -3 1.01 -32 -4 0.935 -5 0.86 -6 0.785 -56 -7 0.71 -64 -8 0.635 -72 -9 0.56 -40 -48 -80 40 60 80 100 120 140 160 frequency in MHz 180 200 220 -10 134 240 135.2 136.4 137.6 138.8 140 141.2 frequency in MHz 142.4 143.6 144.8 delay in µs 0 -8 magnitude in dB magnitude in dB Filter characteristic 0.485 146 Construction and pin connection (All dimensions in mm) TFS 140AV ● V03 6,8Max. 13,6Max. 2,54 ±0,15 1,5 2,54 ±0,15 1 2 3 4 2,0Max. 1 12 5 11 6 Date code 10 9 8 7 1 2 3 4 5 6 7 8 9 10 11 12 Ground Ground Ground Ground Output Output RF Return Ground Ground Ground Ground Input Input RF Return Date code: V W X ... Year + week 2007 2008 2009 0,1 0,8 50 Ω Test circuit L1 11 12 5 SAW L2 6 C2 C1 1, 2, 3, 4, 7, 8, 9, 10 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 140av.doc Version 1.2 VI TELEFILTER 17.01.2007 Filter specification TFS 140AV 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 1700 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 24,00 +0,30/-0,10 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,10 F : 11,50 ± 0,10 G(min) : 0,60 P2 : 2,00 ± 0,1 P1 : 12,00 ± 0,1 D1(min) : 1,50 Ao : 7,10 ± 0,10 Bo : 13,90 ± 0,10 Ct : 21,5 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 24,4 +2/-0 W2(max) : 30,4 N(min) : 60 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 140av.doc Version 1.2 VI TELEFILTER 17.01.2007 Filter specification TFS 140AV 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 140av.doc VI TELEFILTER Version 1.2 Filter specification 17.01.2007 TFS 140AV 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 25.07.2006 1.1 - package adjusted Strehl 25.07.2006 1.2 - add of terminating impedances, typical values, filter characteristics and matching configuration - ‘remarks’ and labelling corrected Pfeiffer 17.01.2007 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.