Filename: tfs 125s.doc Version 1.1 Vectron International 30.11.2011 Filter specification TFS 125S 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 °C dBm 207 Ω || -24 pF 99 Ω || -25 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS125S is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The nominal frequency fN is fixed at 125 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value ae Insertion loss 11 dB tolerance / limit max. 14 dB (reference level) fN Nominal frequency 125 PB Passband fN 0.3 Pass band ripple ± 8 dB max. 1 MHz MHz dB Bandwidth 1 dB 22 MHz min. 16 MHz 25 dB 29 MHz max. 40 MHz Relative attenuation arel MHz fN - 8 MHz … fN + 8 dB max. 1 dB fN - 100 MHz … fN - 33 MHz 53 dB min. 40 dB fN - 33 MHz … fN - 20 MHz 40 dB min. 25 dB fN + 20 MHz … fN + 33 MHz 36 dB min. 25 dB fN + 33 MHz … fN + 100 MHz 48 dB min. 40 dB 16 ns max. 30 ns 10 dB min. 6 dB Group delay ripple in PB GDR Return loss within PB Operating temperature range 0.3 OTR - 40 °C ... + 85°C - 45 °C ... + 85°C Storage temperature range Temperature coefficient of frequency TCf * -94 ppm/K *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 125s.doc Version 1.1 Vectron International 30.11.2011 Filter specification TFS 125S 2/5 Filter characteristic insertion loss: -11.23 dB 0 magnitude in dB magnitude in dB -20 -40 -60 -80 -100 50 100 150 frequency in MHz 0.5328 -1 0.5256 -1.5 0.5184 -2 0.5112 -2.5 0.504 -3 0.4968 -3.5 0.4896 -4 0.4824 -4.5 0.4752 -5 200 0.54 -0.5 115 120 125 130 frequency in MHz 135 delay in µs 0 0.468 Construction and pin connection (All dimensions in mm) 9 7 6 10 S 125S ● B49 1 4 Date code 3 0,6 2,54 1 1 5 ,0 +/-0,2 1,8 +/-0,2 12 1 2 3 4 5 6 7 8 9 10 11 12 Ground Ground Ground Output Ground Output RF Return / Ground Ground Ground Ground Input Ground Input RF Return / Ground Date code: B C D ... Year + week 2011 2012 2013 2,54 7 ,0 +/-0,2 50 Ohm Test circuit L1 R1 10 L2 12 L3 4 SAW 6 R2 C1 1,2,3,5,7,8,9,11 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 125s.doc Version 1.1 Vectron International 30.11.2011 Filter specification TFS 125S 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; MIL-STD-883E using coupling network of ISO 10605 and EN 6100-4-2 HBM:250V; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 16,00 +0,3/-0,1 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 7,50 ± 0,1 G(min) : 0,75 P2 : 2,00 ± 0,1 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 5,40 ± 0,1 Bo : 7,60 ± 0,1 Ct : 13,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 125s.doc Version 1.1 Vectron International 30.11.2011 Filter specification TFS 125S 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 125s.doc Vectron International Version 1.1 Filter specification 30.11.2011 TFS 125S 5/5 History Version Reason of Changes 1.0 - Generation of development specification Chilla 22.07.2010 1.1 - Generated filter specification - Added terminating impedances - Added typical values - Added filter characteristics - Added test circuit Chilla 30.11.2011 Name Date Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.