Filename: tfs 1240.doc Version 1.4 VI TELEFILTER 25.02.2008 Filter specification TFS 1240 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The reference level for the relative attenuation arel of the TFS 1240 is the maximum attenuation in the passband 1. The maximum attenuation in the pass band 1 is defined as the insertion loss ae. The nominal frequency fN is fixed at 1240 MHz without any tolerance or limit. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value dB tolerance / limit Insertion loss ae 3,5 max. Nominal frequency fN - Passband 1 PB - fN Passband 2 PB - fN 5,0 dB 1240,0 MHz ± 14,5 MHz ± 22,5 MHz Pass band variation 1 0,6 dB max. 1,0 dB Pass band variation 2 1,0 dB max. 2,0 dB 54 50 44 dB dB dB min. min. min. 50 47 30 dB dB dB 6 ns max. 25 ns 11 dB min. 10 dB Relative attenuation 1077,5 1122,5 1170,0 arel MHz MHz MHz Group delay ripple within PB p-p Return loss Operating temperature range OTR Storage temperature range Temperature coefficient of frequency - - 10 °C ... + 75 °C TCf * -72 - 40 °C ... + 85 °C ppm/K - *) ∆ f(Hz) =TCf(ppm/K) x(T-T0) x fTo (MHz) Generated: Checked / Approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1240.doc Version 1.4 VI TELEFILTER 25.02.2008 Filter specification TFS 1240 2/5 0 -1 -20 -2 -30 -3 -40 -4 -50 -60 -6 -7 -80 -8 -90 -9 1096 1132 1168 1204 1240 1276 frequency in MHz 1312 1348 1384 -10 1200 1420 6 -5 -70 -100 1060 9 VSWR 0 -10 magnitude in dB magnitude in dB Filter characteristic 3 1208 1216 1224 1232 1240 1248 frequency in MHz 1256 1264 1272 0 1280 Construction and pin connection (All dimensions in mm) 7 C40 ● W09 1 SQ 3,81 +0,2/-0,1 5 1 2 3 4 5 6 7 8 Ground Input Ground Ground Ground Output Ground Ground Date code: W X A ... Year + week 2008 2009 2010 3 7 5 0,1 12 0% 0,6 % d 3 1,78 2,54 1 1,2 Max. Date code 1,78 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1240.doc Version 1.4 VI TELEFILTER 25.02.2008 Filter specification TFS 1240 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 12,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 5,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 4,30 ± 0,1 Bo : 4,30 ± 0,1 Ct : 9,5 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1240.doc Version 1.4 VI TELEFILTER 25.02.2008 Filter specification TFS 1240 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1240.doc VI TELEFILTER Version 1.4 Filter specification 25.02.2008 TFS 1240 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 22.05.2007 1.1 - Add group delay ripple within PB Strehl 16.07.2007 1.2 - Change characteristics and attenuation - correct frequency of first attenuation requirement Strehl 11.12.2007 1.3 - Change tolerance scheme - Add typical value und filter characteristic - Generation of filter specification Noack 05.02.2008 -Add of temperature range and change of tolerance scheme S.Springfeldt 25.02.2008 1.4 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.