POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation RECTIFIER DIODES MODULE *Full ermetic packaging *Industrial compatible packaging *Insulation using Aln substrate *6KVrms insulation voltage available on request *Contact screws avaliable on request POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. +39 010 6556234 - Fax +39 010 6557519 Sales Office: Tel. +39 010 6556775 - Fax +39 010 6442510 ADD500 Repetitive voltage up to Mean on-state current Surge current 3300 V 535 A 10.3 kA FINAL SPECIFICATION mar 01 - ISSUE : 03 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM Repetitive peak reverse voltage 150 3300 V V RSM Non-repetitive peak reverse voltage 150 3400 V I RRM Repetitive peak reverse current 150 50 mA 535 A CONDUCTING I F (AV) Mean on-state current 180° sin, 50Hz, Tc=100°C I F (AV) Mean on-state current 180° sin. 50Hz, Tc=55°C I FSM Surge on-state current sine wave, 10 ms 815 A 150 10.3 kA 530 x1E3 A²s 150 1.97 I² t I² t without reverse voltage V F On-state voltage On-state current = V F(TO) Threshold voltage 150 0.89 V F On-state slope resistance 150 0.675 mohm r 1600 A V MOUNTING R th(j-c) Thermal impedance Junction to case, per element 50 °C/kW R th(c-h) Thermal impedance Case to heatsink, per element 20 °C/kW T j Operating junction temperature -30 / 150 °C V ins RMS insulation voltage 50Hz, circuit to base,all terminal shorted Mounting tourque Case to heatsink Busbars to terminals T Mass ORDERING INFORMATION : ADD500 S 33 standard specification VRRM/100 25 4500(*) V 4 to 6 12 to 18 1500 Nm Nm g (*) 6000V available on request. Add HVI to the desired code in phase of order, i.e. ADD500S33HVI ADD500 RECTIFIER DIODES MODULE POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation FINAL SPECIFICATION mar 01 - ISSUE : 03 DISSIPATION CHARACTERISTICS SQUARE WAVE Tcase [°C] 150 140 130 120 110 30° 60° 90° 100 120° DC 180° 90 0 100 200 300 400 500 600 700 800 IF(AV) [A] PF(AV) [W] 1200 1000 DC 180° DC 90° 800 120° 60° 30° 600 400 200 0 0 100 200 300 400 IF(AV) [A] 500 600 700 800 ADD500 RECTIFIER DIODES MODULE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 01 - ISSUE : 03 DISSIPATION CHARACTERISTICS SINE WAVE Tcase [°C] 150 140 130 120 110 30° 60° 90° 120° 180° 100 90 0 100 200 300 400 500 600 IF(AV) [A] PF(AV) [W] 1200 1000 DC 90° 800 180° 120° 60° 30° 600 400 200 0 0 100 200 300 IF(AV) [A] 400 500 600 ADD500 RECTIFIER DIODES MODULE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 01 - ISSUE : 03 SURGE CHARACTERISTIC Tj = 150 °C ON-STATE CHARACTERISTIC Tj = 150 °C 12 1400 10 1000 8 800 ITSM [kA] On-state Current [A] 1200 600 6 4 400 2 200 0 0.75 1.25 1.75 0 2.25 1 On-state Voltage [V] 10 n° cycles TRANSIENT THERMAL IMPEDANCE 60.0 Zth j-c [°C/kW] 50.0 40.0 30.0 20.0 10.0 0.0 0.001 0.01 0.1 1 10 100 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100