METALLIZED POLYCARBONATE CAPACITORS PLASTIC CASE – RADIAL LEADS METALLIZED POLYCARBONATE Self-healing, high reliability High stability Low capacitance change over wide temperature range High volumetric efficiency Precision circuits requiring low losses, light duty, low frequency energy discharge, coupling and decoupling STYLE “P2” Plastic case Rectangular radial leads Thin shell, rugged, but light Rugged, improved moisture resistance, designed to meet vibration and thermal shock specifications Metallized polycarbonate capacitors are also available in rectangular, axial-lead “Style V.” Hermetically sealed types are available. Please contact factory or representative. SPECIFICATIONS CONSTRUCTION: metallized polycarbonate capacitors are available only in extended foil (non-inductive) construction PACKAGING: rectangular plastic case, epoxy encapsulated, radial copperweld leads LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55°C to +125°C without derating voltage ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to and including 1.0 uf. Capacitance values greater than 1.0 mfd shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202E, Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 0.3% to 1 mfd, 0.5% greater than 1 mfd. Typical values throughout the temperature range, are given on curves. INSULATION RESISTANCE: shall be measured as follows: 50 - 100V at 25°C 25,000 meg/mfd, need not exceed 50,000 Megohms 200V at 25°C 50,000 meg/mfd, need not exceed 100,000 Megohms Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: capacitors shall withstand specified DC test potential for one minute through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating Terminal to case - 200% of DC rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: shall not exceed 0.2% when tested to MIL-C-19978D Ref: MIL-C-19978D, Paragraph 3.22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 204 MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, condition B, with 500 VDC or rated voltage applied, whichever is less LIFE TEST: will withstand 140% of the rated DC voltage at 125°C for 250 hours with not more than one failure in 12 units LEAD PULL TEST: the leads on these capacitors shall withstand a steadily applied radial pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice -- special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized polycarbonate capacitors in Style "P" pre-molded plastic cases eliminate problems of insulation, environment, space and weight. These units have consistently met the environmental requirements of MIL-C55514A and moisture resistance per MIL-STD-202E Method 103B. Metallized polycarbonate capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of polycarbonate film. Metallized polycarbonate capacitors are designed primarily for DC application - blocking, coupling, decoupling, bypass, DC line filtering-where RF and audio components are small in comparison to DC rating. However, they have been successfully used in AC power applications such as power factor correction and AC line filtering. Metallized polycarbonate capacitors operate at all temperatures from -55°C to +125°C. APPLICATION GUIDE: [AC VOLTAGE RATING, -55˚C to +125˚C. AMBIENT] EQUIVALENT VAC [RMS] RATING AT VOLTAGE RATING 60 Hz 400 Hz 50V N/A N/A 100V 63 VAC 45 VAC 200V 160 VAC 95 VAC 400V 200 VAC 170 VAC 600V 240 VAC 190 VAC (AC voltage assumed to be pure sine wave) TYPICAL TEMPERATURE CHARACTERISTICS RP2, DP2, BP2 SERIES – SPECIFICATIONS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1000 Hz N/A 40 VAC 80 VAC 140 VAC 160 VAC DIMENSIONS *50 VDC **50 – 100 VDC **50 – 200 VDC 400 VDC 600 VDC MFD T H L Part No. T H L Part No. T H L Part No. T H L Part No. T H L Part No. .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .100 .120 .150 .180 .220 .270 .330 .390 .470 .560 .680 .820 1.0 1.5 2.0 3.0 4.0 5.0 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .24 .24 .30 .30 .30 .30 .30 .40 .40 .40 .40 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .82 .82 .82 1.04 1.24 RP2A102 RP2A122 RP2A152 RP2A182 RP2A222 RP2A272 RP2A332 RP2A392 RP2A472 RP2A562 RP2A682 RP2A822 RP2A103 RP2A123 RP2A153 RP2A183 RP2A223 RP2A273 RP2A333 RP2A393 RP2A473 RP2A563 RP2A683 RP2A823 RP2A104 RP2A124 RP2A154 RP2A184 RP2A224 RP2A274 RP2A334 RP2A394 RP2A474 RP2A564 RP2A684 RP2A824 RP2A105 RP2A155 RP2A205 RP2A305 RP2A405 RP2A505 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .24 .24 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .57 .57 .57 .57 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .76 .76 .76 .76 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.24 1.75 DP2B102 DP2B122 DP2B152 DP2B182 DP2B222 DP2B272 DP2B332 DP2B392 DP2B472 DP2B562 DP2B682 DP2B822 DP2B103 DP2B123 DP2B153 DP2B183 DP2B223 DP2B273 DP2B333 DP2B393 DP2B473 DP2B563 DP2B683 DP2B823 DP2B104 DP2B124 DP2B154 DP2B184 DP2B224 DP2B274 DP2B334 DP2B394 DP2B474 DP2B564 DP2B684 DP2B824 DP2B105 DP2B155 DP2B205 DP2B305 DP2B405 DP2B505 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .24 .24 .30 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .40 .57 .57 .57 .75 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .46 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .90 1.00 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .82 .82 .82 .82 .82 1.04 1.04 1.24 1.24 1.24 1.24 1.75 1.95 1.95 1.95 BP2C102 BP2C122 BP2C152 BP2C182 BP2C222 BP2C272 BP2C332 BP2C392 BP2C472 BP2C562 BP2C682 BP2C822 BP2C103 BP2C123 BP2C153 BP2C183 BP2C223 BP2C273 BP2C333 BP2C393 BP2C473 BP2C563 BP2C683 BP2C823 BP2C104 BP2C124 BP2C154 BP2C184 BP2C224 BP2C274 BP2C334 BP2C394 BP2C474 BP2C564 BP2C684 BP2C824 BP2C105 BP2C155 BP2C205 BP2C305 BP2C405 BP2C505 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .24 .24 .24 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .40 .57 .57 .57 .57 .57 .57 .75 .75 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .76 .76 .76 1.00 1.00 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .82 .82 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.24 1.24 1.24 1.75 1.75 1.95 1.95 1.95 1.95 BP2E102 BP2E122 BP2E152 BP2E182 BP2E222 BP2E272 BP2E332 BP2E392 BP2E472 BP2E562 BP2E682 BP2E822 BP2E103 BP2E123 BP2E153 BP2E183 BP2E223 BP2E273 BP2E333 BP2E393 BP2E473 BP2E563 BP2E683 BP2E823 BP2E104 BP2E124 BP2E154 BP2E184 BP2E224 BP2E274 BP2E334 BP2E394 BP2E474 BP2E564 BP2E684 BP2E824 BP2E105 BP2E155 BP2E205 .16 .16 .16 .16 .16 .18 .18 .18 .18 .24 .24 .24 .24 .24 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .57 .57 .57 .57 .57 .57 .57 .75 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .76 .76 .76 .90 1.00 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .82 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.24 1.24 1.24 1.75 1.75 1.75 1.95 1.95 1.95 BP2G102 BP2G122 BP2G152 BP2G182 BP2G222 BP2G272 BP2G332 BP2G392 BP2G472 BP2G562 BP2G682 BP2G822 BP2G103 BP2G123 BP2G153 BP2G183 BP2G223 BP2G273 BP2G333 BP2G393 BP2G473 BP2G563 BP2G683 BP2G823 BP2G104 BP2G124 BP2G154 BP2G184 BP2G224 BP2G274 BP2G334 BP2G394 BP2G474 BP2G564 BP2G684 BP2G824 Higher values or voltages are available. *50 VDC units also available in B and D material. **100 VDC units also available in B material. Length “L” Spacing “LS” A.W.G. .42 .30 22 LEAD SPACING DIMENSION .55 .67 .82 1.04 .40 .50 .60 .80 22 22 22 22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1.24 1.10 20 1.75 1.60 20 1.95 1.80 18