METALLIZED POLYESTER FILM CAPACITORS EPOXY CASE – RADIAL LEADS METALLIZED POLYESTER General purpose applications such as bypassing, coupling or decoupling and instrumentation Both low and high impedance circuits Self-healing characteristic Usually smallest and most economical of the metallized capacitors STYLE “P2” Pre-molded plastic case, radial leads Lead spacing appropriate for 0.1 grid layouts Thin shell, rugged, but light Rectangular configuration Comparable to hermetically sealed metallic enclosures Designed to meet thermal shock, vibration and moisture resistance specifications Metallized polyester capacitors are also available in several plastic case styles. Hermetically sealed types are available. Please contact factory or representative. SPECIFICATIONS CONSTRUCTION: metallized polyester capacitors are available only in extended foil (non-inductive) construction LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55° to +85°C or to +125°C at voltages indicated by derating curves ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to at 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to an including 1.0 mfd. Capacitance values greater than 1.0 mfd shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202E, Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 1.0%. Typical values, throughout the temperature range, are given on curves. INSULATION RESISTANCE: shall be measured as follows: 50 - 100V at 25°C 10,000 meg/mfd, need not exceed 40,000 Megohms 200V at 25°C 25,000 meg/mfd, need not exceed 60,000 Megohms Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: Capacitors shall withstand specified DC potential for one minute through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating Terminal to case - 200% of DC rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: shall not exceed 0.6% when tested to MIL-C-19978D Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 204 MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, condition B, with 500 VDC or rated voltage applied, whichever is less LIFE TEST: capacitors will withstand 140% of the rated DC voltage for 250 hours at 85°C. No more than one failure in 12 units permitted when tested. LEAD PULL TEST: the leads on the capacitors shall withstand a steadily applied axial pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice -- special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized polyester capacitors in Style "P" premolded plastic cases eliminate problems of insulation, environment, space and weight. These units have consistency met the environmental requirements of MIL-C55514A and moisture resistance per MIL-STD-202E, Method 103B. Metallized polyester capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of polyester film. Metallized polyester capacitors are designed primarily for DC application -- blocking, coupling, decoupling, bypass, DC line filtering, where RF and audio components are small in comparison to DC raging. However, they have been used very successfully in such AC power applications as power factor correction and AC line filtering. Metallized polyester capacitors operate at all temperatures from -55°C to +85°C, de-rate to 50% at +125°C. TYPICAL TEMPERATURE CHARACTERISTICS JP2, XP2, ZP2 SERIES – SPECIFICATIONS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com DIMENSIONS *50 VDC **50 – 100 VDC **50 – 200 VDC 400 VDC 600 VDC MFD T H L Part No. T H L Part No. T H L Part No. T H L Part No. T H L Part No. .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.0 3.0 4.0 5.0 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .24 .24 .30 .30 .30 .30 .30 .40 .40 .40 .40 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .82 .82 .82 .82 1.24 JP2A102 JP2A122 JP2A152 JP2A182 JP2A222 JP2A272 JP2A332 JP2A392 JP2A472 JP2A562 JP2A682 JP2A822 JP2A103 JP2A123 JP2A153 JP2A183 JP2A223 JP2A273 JP2A333 JP2A393 JP2A473 JP2A563 JP2A683 JP2A823 JP2A104 JP2A124 JP2A154 JP2A184 JP2A224 JP2A274 JP2A334 JP2A394 JP2A474 JP2A564 JP2A684 JP2A824 JP2A105 JP2A155 JP2A205 JP2A305 JP2A405 JP2A505 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .24 .24 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .57 .57 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 1.04 1.24 1.75 1.75 XP2B102 XP2B122 XP2B152 XP2B182 XP2B222 XP2B272 XP2B332 XP2B392 XP2B472 XP2B562 XP2B682 XP2B822 XP2B103 XP2B123 XP2B153 XP2B183 XP2B223 XP2B273 XP2B333 XP2B393 XP2B473 XP2B563 XP2B683 XP2B823 XP2B104 XP2B124 XP2B154 XP2B184 XP2B224 XP2B274 XP2B334 XP2B394 XP2B474 XP2B564 XP2B684 XP2B824 XP2B105 XP2B155 XP2B205 XP2B305 XP2B405 XP2B505 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .24 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .40 .57 .57 .57 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .40 .40 .40 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 1.04 1.04 1.24 1.24 1.75 1.75 1.75 1.95 1.95 ZP2C102 ZP2C122 ZP2C152 ZP2C182 ZP2C222 ZP2C272 ZP2C332 ZP2C392 ZP2C472 ZP2C562 ZP2C682 ZP2C822 ZP2C103 ZP2C123 ZP2C153 ZP2C183 ZP2C223 ZP2C273 ZP2C333 ZP2C393 ZP2C473 ZP2C563 ZP2C683 ZP2C823 ZP2C104 ZP2C124 ZP2C154 ZP2C184 ZP2C224 ZP2C274 ZP2C334 ZP2C394 ZP2C474 ZP2C564 ZP2C684 ZP2C824 ZP2C105 ZP2C155 ZP2C205 ZP2C305 ZP2C405 ZP2C505 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .24 .30 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .57 .57 .57 .57 .57 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .46 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .90 1.00 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .82 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.24 1.24 1.24 1.75 1.95 1.95 ZP2E102 ZP2E122 ZP2E152 ZP2E182 ZP2E222 ZP2E272 ZP2E332 ZP2E392 ZP2E472 ZP2E562 ZP2E682 ZP2E822 ZP2E103 ZP2E123 ZP2E153 ZP2E183 ZP2E223 ZP2E273 ZP2E333 ZP2E393 ZP2E473 ZP2E563 ZP2E683 ZP2E823 ZP2E104 ZP2E124 ZP2E154 ZP2E184 ZP2E224 ZP2E274 ZP2E334 ZP2E394 ZP2E474 ZP2E564 ZP2E684 ZP2E824 ZP2E105 ZP2E155 ZP2E205 ZP2E305 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .24 .30 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .57 .57 .57 .57 .57 .57 .57 .75 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .40 .46 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .76 .76 .90 1.00 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 .82 .82 1.04 1.04 1.24 1.24 1.24 1.24 1.24 1.75 1.75 1.75 1.95 1.95 ZP2G102 ZP2G122 ZP2G152 ZP2G182 ZP2G222 ZP2G272 ZP2G332 ZP2G392 ZP2G472 ZP2G562 ZP2G682 ZP2G822 ZP2G103 ZP2G123 ZP2G153 ZP2G183 ZP2G223 ZP2G273 ZP2G333 ZP2G393 ZP2G473 ZP2G563 ZP2G683 ZP2G823 ZP2G104 ZP2G124 ZP2G154 ZP2G184 ZP2G224 ZP2G274 ZP2G334 ZP2G394 ZP2G474 ZP2G564 ZP2G684 ZP2G824 ZP2G105 ZP2G155 Higher values or voltages are available. *50 VDC units also available in X and Z material. **100 VDC units also available in Z material. LEAD SPACING DIMENSION Length “L”: Spacing “LS”: A.W.G. .42 .30 .22 .55 .40 22 .67 .50 22 .82 .60 22 1.04 .80 22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1.24 1.10 20 1.75 1.60 20 1.95 1.80 18