METALLIZED POLYPHENYLENE FILM CAPACITORS WRAP AND FILL – OVAL AXIAL LEADS METALLIZED POLYPHENYLENE SULFIDE Self-healing, high reliability High stability Low capacitance change over wide temperature range High volumetric efficiency Precision circuits requiring low losses, light duty, low frequency energy discharge, coupling and decoupling STYLE “A2” Polyester tape wrap, end filled with epoxy Round-cylindrical shape, axial leads Designated to meet thermal shock, vibration and moisture resistance specifications Metallized Polyphenylene Sulfide capacitors are also available in in oval-rectangular, axial-lead “Style A1.” Hermetically sealed units are available. Please contact factory or representative. SPECIFICATIONS CONSTRUCTION: metallized Polyphenylene Sulfide capacitors are available only in extended foil (non-inductive) construction PACKAGING: polyester tape wrap with epoxy endfills gives the best possible volume density for this type unit LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55°C to 125°C without derating voltage ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to and including 1.0 uf. Capacitance values greater than 1.0 mfd shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202E, Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 0.3% to 1 mfd, 0.5% greater than 1 mfd. Typical values throughout the temperature range, are given on curves. INSULATION RESISTANCE: shall be measured as follows: 50 - 100V at 25°C 25,000 meg/mfd, need not exceed 50,000 Megohms 200V + at 25°C 50,000 meg/mfd, need not exceed 100,000 Megohms Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: capacitors shall withstand specified DC test potential for one minute through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating Terminal to case - 200% of DC rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: shall not exceed 0.2% when tested to MIL-C-19978D Ref: MIL-C-19978D, Paragraph 3.22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 204 MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, condition B, with 500 VDC or rated voltage applied, whichever is less LIFE TEST: will withstand 140% of the rated DC voltage at 125°C for 250 hours with not more than one failure in 12 units LEAD PULL TEST: leads on these capacitors shall withstand a steadily applied axial pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice -- special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized Polyphenylene Sulfide capacitors, in Style "A2" oval wrap and fill cases offer the user the best possible volume density for cord wood type assemblies. These units have consistently met the environmental requirements of MIL-C-55514A and moisture resistance per MIL-STD-202E, Method 103B. Metallized Polyphenylene Sulfide capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of polycarbonate film. Metallized Polyphenylene Sulfide capacitors are designed primarily for DC application -- blocking, coupling, decoupling, bypass, DC line filtering, where RF and audio components are small in comparison to DC rating. However, they have been used successfully in such AC power applications as power factor correction and AC line filtering. Metallized Polyphenylene Sulfide capacitors operate at all temperatures from -55°C to + 125°C and are intended for utilization in sealed or encapsulated assemblies. APPLICATION GUIDE: [AC VOLTAGE RATING, -55˚C to +125˚C. AMBIENT] EQUIVALENT VAC [RMS] RATING AT VOLTAGE RATING 60 Hz 400 Hz 50V N/A N/A 100V 63 VAC 45 VAC 200V 160 VAC 95 VAC 400V 200 VAC 170 VAC 600V 240 VAC 190 VAC (AC voltage assumed to be pure sine wave) TYPICAL TEMPERATURE CHARACTERISTICS WA2, NA2, AA2 SERIES – SPECIFICATIONS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1000 Hz N/A 40 VAC 80 VAC 140 VAC 160 VAC DIMENSIONS *50 VDC **50 – 100 VDC **50 – 200 VDC 400 VDC MFD T H L Part No. T H L Part No. T H L Part No. T .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.0 3.0 4.0 5.0 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .10 .10 .12 .09 .10 .12 .14 .15 .16 .19 .21 .24 .21 .23 .27 .33 .33 .30 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .19 .20 .20 .22 .19 .20 .22 .24 .25 .27 .30 .31 .34 .31 .33 .37 .43 .43 .43 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .78 .90 1.17 WA2A102 WA2A122 WA2A152 WA2A182 WA2A222 WA2A272 WA2A332 WA2A392 WA2A472 WA2A562 WA2A682 WA2A822 WA2A103 WA2A123 WA2A153 WA2A183 WA2A223 WA2A273 WA2A333 WA2A393 WA2A473 WA2A563 WA2A683 WA2A823 WA2A104 WA2A124 WA2A154 WA2A184 WA2A224 WA2A274 WA2A334 WA2A394 WA2A474 WA2A564 WA2A684 WA2A824 WA2A105 WA2A155 WA2A205 WA2A305 WA2A405 WA2A505 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .11 .12 .10 .10 .11 .12 .14 .17 .18 .20 .16 .17 .20 .21 .23 .25 .27 .27 .27 .32 .40 .45 .51 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .21 .22 .20 .20 .21 .23 .25 .27 .28 .30 .25 .25 .30 .30 .32 .34 .36 .37 .37 .42 .50 .65 .70 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.40 1.40 NA2B102 NA2B122 NA2B152 NA2B182 NA2B222 NA2B272 NA2B332 NA2B392 NA2B472 NA2B562 NA2B682 NA2B822 NA2B103 NA2B123 NA2B153 NA2B183 NA2B223 NA2B273 NA2B333 NA2B393 NA2B473 NA2B563 NA2B683 NA2B823 NA2B104 NA2B124 NA2B154 NA2B184 NA2B224 NA2B274 NA2B334 NA2B394 NA2B474 NA2B564 NA2B684 NA2B824 NA2B105 NA2B155 NA2B205 NA2B305 NA2B405 NA2B505 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10 .12 .14 .10 .11 .12 .14 .15 .16 .18 .20 .22 .19 .21 .24 .19 .21 .24 .27 .30 .33 .32 .34 .43 .43 .49 .55 .60 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .22 .22 .23 .20 .20 .21 .22 .24 .26 .29 .32 .33 .29 .32 .34 .32 .34 .36 .38 .43 .47 .46 .47 .58 .58 .61 .70 .75 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .90 .90 .90 .90 .90 .90 1.17 1.17 1.17 1.40 1.68 1.95 1.95 AA2C102 AA2C122 AA2C152 AA2C182 AA2C222 AA2C272 AA2C332 AA2C392 AA2C472 AA2C562 AA2C682 AA2C822 AA2C103 AA2C123 AA2C153 AA2C183 AA2C223 AA2C273 AA2C333 AA2C393 AA2C473 AA2C563 AA2C683 AA2C823 AA2C104 AA2C124 AA2C154 AA2C184 AA2C224 AA2C274 AA2C334 AA2C394 AA2C474 AA2C564 AA2C684 AA2C824 AA2C105 AA2C155 AA2C205 AA2C305 AA2C405 AA2C505 .10 .10 .10 .10 .10 .10 .12 .13 .10 .10 .10 .11 .12 .14 .16 .18 .20 .23 .19 .21 .23 .21 .26 .26 .29 .33 .30 .33 .31 .35 .39 .43 .48 .38 .43 .48 .54 .62 .73 .92 1.05 1.18 H .20 .20 .20 .20 .20 .20 .27 .23 .20 .20 .20 .21 .22 .23 .24 .26 .27 .31 .27 .29 .31 .30 .32 .34 .40 .42 .45 .48 .45 .50 .52 .56 .64 .59 .64 .69 .75 .82 .91 1.15 1.28 1.40 Higher values or voltages are available. *50 VDC units also available in A and N material. **100 VDC units also available in A material. PART LENGTH .40 THRU .65 .78 THRU .90 1.17 THRU 2.25 WIRE LEADS A.W.G. #24 #22 #20 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com DIA. .020 .025 .032 600 VDC L Part No. T H L Part No. .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 .78 .78 .78 .90 .90 1.17 1.17 1.17 1.17 1.17 1.68 1.68 1.68 1.68 2.00 2.00 2.00 2.25 2.25 AA2E102 AA2E122 AA2E152 AA2E182 AA2E222 AA2E272 AA2E332 AA2E392 AA2E472 AA2E562 AA2E682 AA2E822 AA2E103 AA2E123 AA2E153 AA2E183 AA2E223 AA2E273 AA2E333 AA2E393 AA2E473 AA2E563 AA2E683 AA2E823 AA2E104 AA2E124 AA2E154 AA2E184 AA2E224 AA2E274 AA2E334 AA2E394 AA2E474 AA2E564 AA2E684 AA2E824 AA2E105 AA2E155 AA2E205 AA2E305 AA2E405 AA2E505 .10 .10 .10 .10 .10 .12 .14 .10 .11 .13 .14 .15 .17 .19 .21 .23 .21 .22 .22 .23 .27 .29 .33 .34 .33 .31 .34 .39 .43 .39 .42 .44 .49 .56 .58 .58 .65 .20 .20 .20 .20 .20 .23 .24 .20 .21 .21 .25 .26 .27 .29 .31 .33 .31 .35 .32 .33 .37 .39 .42 .52 .49 .45 .52 .55 .60 .52 .56 .59 .65 .69 .70 .79 .86 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .78 .78 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.17 1.68 1.68 1.68 1.68 1.68 2.00 2.25 2.25 AA2G102 AA2G122 AA2G152 AA2G182 AA2G222 AA2G272 AA2G332 AA2G392 AA2G472 AA2G562 AA2G682 AA2G822 AA2G103 AA2G123 AA2G153 AA2G183 AA2G223 AA2G273 AA2G333 AA2G393 AA2G473 AA2G563 AA2G683 AA2G823 AA2G104 AA2G124 AA2G154 AA2G184 AA2G224 AA2G274 AA2G334 AA2G394 AA2G474 AA2G564 AA2G684 AA2G824 AA2G105