METALLIZED POLYPHENYLENE SULFIDE FILM CAPACITORS PLASTIC CASE – AXIAL LEADS METALLIZED POLYPHENYLENE SULFIDE Self-healing, high reliability High stability Low capacitance change over wide temperature range High volumetric efficiency Precision circuits requiring low losses, light duty, low frequency energy discharge, coupling and decoupling STYLE “V2” Plastic case, rectangular Axial leads Rugged, improved moisture resistance, designed to meet vibration and thermal shock specifications Metallized Polyphenylene Sulfide capacitors are also available in rectangular, radial lead “Style P.” Hermetically sealed types are available. Please contact factory or representative. SPECIFICATIONS CONSTRUCTION: metallized Polyphenylene sulfide capacitors are available only in extended foil (non-inductive) construction PACKAGING: rectangular plastic case, epoxy encapsulated, axial copperweld leads LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55°C to 125°C without derating voltage ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to and including 1.0 uf. Capacitance values greater than 1.0 mfd., shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202E5 Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 0.3% to 1 mfd, 0.5% greater than 1 mfd. Typical values throughout the temperature range, are given on curves. INSULATION RESISTANCE: shall be measured as follows: 50-100V at 25°C 25,000 meg/mfd, need not exceed 50,000 Megohms 200V + at 25°C 50,000 meg/mfd, need not exceed 100,000 Megohms Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: capacitors shall withstand specified DC test potential for one minute through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating Terminal to case - 200% of DC rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: shall not exceed 0.2% when tested to MIL-C-19978D Ref: MIL-C-19978D, Paragraph 3.22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 204 MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, condition B, with 500 VDC or rated voltage applied, whichever is less LIFE TEST: will withstand 140% of the rated DC voltage at 125°C for 250 hours with not more than one failure in 12 units LEAD PULL TEST: leads on these capacitors shall withstand a steadily applied axial pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice -- special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized Polyphenylene Sulfide capacitors in Style "V" pre-molded plastic cases eliminate problems of insulation, environment, space and weight. These units have consistently met the environmental requirements of MIL-C-55514A and moisture resistance per MIL-STD-202E, Method 103B. Metallized Polyphenylene Sulfide capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of polycarbonate film. Metallized Polyphenylene Sulfide capacitors are designed primarily for DC application - blocking, coupling, decoupling, bypass, DC line filtering - where RF and audio components are small in comparison to DC rating. However, they have been successfully used in AC power applications such as power factor correction and AC line filtering. Metallized Polyphenylene Sulfide capacitors operate at all temperatures from -55°C to + 125°C. APPLICATION GUIDE: [AC VOLTAGE RATING, -55˚C to +125˚C. AMBIENT EQUIVALENT VAC [RMS] RATING AT VOLTAGE RATING 60 Hz 400 Hz 50V N/A N/A 100V 63 VAC 45 VAC 200V 160 VAC 95 VAC 400V 200 VAC 170 VAC 600V 240 VAC 190 VAC (AC voltage assumed to be pure sine wave) TYPICAL TEMPERATURE CHARACTERISTICS WV2, NV2, AV2 SERIES – SPECIFICATIONS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1000 Hz N/A 40 VAC 80 VAC 140 VAC 160 VAC DIMENSIONS *50 VDC **50 – 100 VDC **50 – 200 VDC 400 VDC 600 VDC MFD T W L Part No. T W L Part No. T W L Part No. T W L Part No. T W L Part No. .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.0 3.0 4.0 5.0 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .17 .16 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .36 .39 .39 .39 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .29 .24 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .49 .54 .54 .54 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .82 .82 .82 1.04 1.24 WV2A102 WV2A122 WV2A152 WV2A182 WV2A222 WV2A272 WV2A332 WV2A392 WV2A472 WV2A562 WV2A682 WV2A822 WV2A103 WV2A123 WV2A153 WV2A183 WV2A223 WV2A273 WV2A333 WV2A393 WV2A473 WV2A563 WV2A683 WV2A823 WV2A104 WV2A124 WV2A154 WV2A184 WV2A224 WV2A274 WV2A334 WV2A394 WV2A474 WV2A564 WV2A684 WV2A824 WV2A105 WV2A155 WV2A205 WV2A305 WV2A405 WV2A505 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .17 .17 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .39 .29 .39 .39 .39 .39 .39 .39 .56 .56 .56 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .29 .29 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .54 .42 .54 .54 .54 .54 .54 .54 .72 .72 .72 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.45 1.45 NV2B102 NV2B122 NV2B152 NV2B182 NV2B222 NV2B272 NV2B332 NV2B392 NV2B472 NV2B562 NV2B682 NV2B822 NV2B103 NV2B123 NV2B153 NV2B183 NV2B223 NV2B273 NV2B333 NV2B393 NV2B473 NV2B563 NV2B683 NV2B823 NV2B104 NV2B124 NV2B154 NV2B184 NV2B224 NV2B274 NV2B334 NV2B394 NV2B474 NV2B564 NV2B684 NV2B824 NV2B105 NV2B155 NV2B205 NV2B304 NV2B405 NV2B505 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .16 .17 .17 .17 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .29 .29 .29 .29 .39 .39 .39 .39 .39 .56 .56 .56 .56 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .29 .29 .29 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .42 .42 .42 .42 .54 .54 .54 .54 .54 .72 .72 .72 .72 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 1.06 1.06 1.06 1.04 1.04 1.04 1.24 1.24 1.24 1.45 1.75 1.90 AV2C102 AV2C122 AV2C152 AV2C182 AV2C222 AV2C272 AV2C332 AV2C392 AV2C472 AV2C562 AV2C682 AV2C822 AV2C103 AV2C123 AV2C153 AV2C183 AV2C223 AV2C273 AV2C333 AV2C393 AV2C473 AV2C563 AV2C683 AV2C823 AV2C104 AV2C124 AV2C154 AV2C184 AV2C224 AV2C274 AV2C334 AV2C394 AV2C474 AV2C564 AV2C684 AV2C824 AV2C105 AV2C155 AV2C205 AV2C304 AV2C405 .16 .16 .16 .16 .16 .16 .16 .17 .17 .16 .16 .17 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .39 .39 .39 .39 .39 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .24 .24 .24 .24 .24 .24 .24 .29 .29 .24 .24 29 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .54 .54 .54 .54 .54 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .82 .82 .67 .82 .82 .82 .82 .88 .88 1.04 1.24 1.24 1.24 1.45 1.45 1.75 1.90 AV2E102 AV2E122 AV2E152 AV2E182 AV2E222 AV2E272 AV2E332 AV2E392 AV2E472 AV2E562 AV2E682 AV2E822 AV2E103 AV2E123 AV2E153 AV2E183 AV2E223 AV2E273 AV2E333 AV2E393 AV2E473 AV2E563 AV2E683 AV2E823 AV2E104 AV2E124 AV2E154 AV2E184 AV2E224 AV2E274 AV2E334 AV2E394 AV2E474 AV2E564 AV2E684 AV2E824 AV2E105 .16 .16 .16 .16 .16 .17 .17 .16 .16 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .29 .39 .39 .39 .39 .39 .56 .56 .56 .56 .56 .56 .56 .56 .56 .24 .24 .24 .24 .24 .29 .29 .24 .24 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .42 .54 .54 .54 .54 .54 .72 .72 .72 .72 .72 .72 .72 .72 .72 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .82 .82 .82 .82 .82 1.04 1.04 .88 .88 1.04 1.04 1.24 1.45 1.45 1.75 1.90 AV2G102 AV2G122 AV2G152 AV2G182 AV2G222 AV2G272 AV2G332 AV2G392 AV2G472 AV2G562 AV2G682 AV2G822 AV2G103 AV2G123 AV2G153 AV2G183 AV2G223 AV2G273 AV2G333 AV2G393 AV2G473 AV2G563 AV2G683 AV2G823 AV2G104 AV2G124 AV2G154 AV2G184 AV2G224 AV2G274 AV2G334 AV2G394 AV2G474 AV2G564 WIRE LEADS CROSS SECTION .16 x .24 THRU .23 x .36 .29 x .42 .39 x .54 THRU .56 x .72 A.W.G #24 #22 #20 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com LEADS DIA. .020 .025 .032