METALLIZED POLYPROPYLENE FILM CAPACITORS PREMOLDED PLASTIC CASES – STYLE “U” METALLIZED POLYPROPYLENE Low leakage, high insulation resistance Self-healing, high reliability DC OPERATION: blocking coupling, bypass, RF circuitry, RC circuits, computers and instrumentation AC OPERATION: power factor, line filtering NEGATIVE TC: acceptable for use with ferrite STYLE “U” CASE: pre-molded plastic case, axial leads THIN SHELL: rugged, but light CYLINDRICAL SHAPE: high stability Comparable to hermetically sealed metallic enclosures designed to meet thermal shock, vibration and moisture resistance specifications Type “G” capacitors are also available in rectangular, axial-lead “Style V.” Hermetically sealed types are available. SPECIFICATIONS CONSTRUCTION: metallized polypropylene capacitors are available only in extended foil (non-inductive) construction PACKAGING: pre-molded plastic case insures a void free, flame resistant, moisture proof case. Cylindrical shape permits best stability for this dielectric. LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55°C to +85°C or to +105°C at voltages, indicated by the derating curve ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to and including 1.0 mfd. Capacitance values greater than 1.0 mfd., shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202 E, Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 0.2%. Typical values, throughout temperature range are given on curve characteristics. INSULATION RESISTANCE: shall be measured at rated voltage or 500 VDC, whichever is less. After two minutes electrification, minimum values shall be 200,000 meg/mfd, need not exceed 400,000 Megohms. Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: capacitors shall withstand specified DC test potential for 60 seconds through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating. Terminal to case - 200% of DC almost rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: dielectric absorption shall not exceed 0.1% when tested to MIL-C-19978D Ref: MIL-C-19978D, paragraph 3.22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202 E, Method 204C MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, Condition B, with 500V or rated voltage applied, whichever is less LIFE TEST: will withstand 140% of rated DC voltage for 250 hours at 105°C. No more than one failure in 12 units permitted when tested. LEAD PULL TEST: the leads of these capacitors shall withstand a steady axially applied pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized Polypropylene capacitors in Style "U" pre-molded plastic cases eliminate problems of insulation, environment, space and weight. These units have consistently met the environmental requirements of MIL-C55514A and moisture resistance per MIL-STD-202E, Method 103B. Metallized Polypropylene capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of Polypropylene film. Metallized Polypropylene capacitors are designed primarily for DC application -- blocking, coupling, bypass, DC line filtering where RF and audio components are small in comparison to DC rating. However, they have been used very successfully in such AC power applications as power factor correction and AC line filtering. Metallized Polypropylene capacitors operate at all temperatures from -55 to +85°C., de-rate to 60% at 105°C. APPLICATION GUIDE: [AC VOLTAGE RATING, -55˚C to +125˚C. AMBIENT] EQUIVALENT VAC [RMS] RATING AT DC VOLTAGE RATING 60 Hz 400 Hz 1000 Hz 200 (.001 uf thru 1.0 uf) 160 120 80 (1.1 uf thru 5.0 uf) 120 90 60 300 (.001 uf thru .82 uf) 240 180 120 (.83 uf thru 4.0 uf) 210 157 105 400 (.001 uf thru .47 uf) 360 200 140 (.48 uf thru 2.0 uf) 295 165 110 600 (.001 uf thru .22 uf) 504 280 240 (.23 uf thru .82 uf) 415 230 195 (AC voltage assumed to be pure sine wave) TYPICAL TEMPERATURE CHARACTERISTICS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1200 Hz 60 50 90 78 115 90 90 74 GU SERIES – SPECIFICATIONS DIMENSIONS MFD D .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.0 3.0 4.0 5.0 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .312 .312 .312 .375 .375 .375 .375 .375 .375 .375 .437 .500 .500 .500 .500 .500 .500 .625 .625 .750 .750 .875 .875 .875 200 VDC L Part No. .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .562 .562 .562 .562 .562 .562 .562 .562 .562 .562 .687 .687 .875 .875 .875 .875 .875 1.000 1.000 1.250 1.250 1.250 1.250 1.500 1.750 2.000 2.000 2.250 GU1C102 GU1C122 GU1C152 GU1C182 GU1C222 GU1C272 GU1C332 GU1C392 GU1C472 GU1C562 GU1C682 GU1C822 GU1C103 GU1C123 GU1C153 GU1C183 GU1C223 GU1C273 GU1C333 GU1C393 GU1C473 GU1C563 GU1C683 GU1C823 GU1C104 GU1C124 GU1C154 GU1C184 GU1C224 GU1C274 GU1C334 GU1C394 GU1C474 GU1C564 GU1C684 GU1C824 GU1C105 GU1C155 GU1C205 GU1C305 GU1C405 GU1C505 D .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .312 .312 .312 .375 .375 .375 .375 .375 .375 .437 .437 .437 .437 .500 .500 .625 .625 .625 .750 .750 .750 .750 .750 .875 .875 300 VDC L Part No. .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .468 .562 .562 .562 .562 .562 .562 .562 .562 .562 .687 .687 .875 .875 .875 .875 .875 1.000 1.000 1.250 1.250 1.250 1.250 1.250 1.250 1.500 1.750 2.000 2.000 2.000 GU1D102 GU1D122 GU1D152 GU1D182 GU1D222 GU1D272 GU1D332 GU1D392 GU1D472 GU1D562 GU1D682 GU1D822 GU1D103 GU1D123 GU1D153 GU1D183 GU1D223 GU1D273 GU1D333 GU1D393 GU1D473 GU1D563 GU1D683 GU1D823 GU1D104 GU1D124 GU1D154 GU1D184 GU1D224 GU1D274 GU1D334 GU1D394 GU1D474 GU1D564 GU1D684 GU1D824 GU1D105 GU1D155 GU1D205 GU1D305 D .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .312 .312 .375 .375 .375 .375 .375 .375 .375 .375 .437 .500 .500 .500 .500 .500 .500 .625 .625 .750 .750 .750 .750 .750 .875 .875 .875 400 VDC L Part No. .468 .468 .468 .468 .468 .468 .468 .468 .562 .562 .562 .562 .562 .562 .562 .562 .562 .562 .687 .687 .875 .875 .875 .875 .875 1.250 1.250 1.250 1.250 1.250 1.250 1.500 1.750 1.750 2.000 2.000 2.250 2.250 GU1E102 GU1E122 GU1E152 GU1E182 GU1E222 GU1E272 GU1E332 GU1E392 GU1E472 GU1E562 GU1E682 GU1E822 GU1E103 GU1E123 GU1E153 GU1E183 GU1E223 GU1E273 GU1E333 GU1E393 GU1E473 GU1E563 GU1E683 GU1E823 GU1E104 GU1E124 GU1E154 GU1E184 GU1E224 GU1E274 GU1E334 GU1E394 GU1E474 GU1E564 GU1E684 GU1E824 GU1E105 GU1E155 D .250 .250 .250 .250 .250 .250 .250 .312 .312 .375 .375 .375 .375 .375 .375 .375 .437 .437 .500 .500 .600 .625 .500 .500 .625 .625 .625 .625 .750 .750 .750 .875 .875 .875 .875 Higher values or voltages are available. *50 VDC units also available in B and D material. **100 VDC units also available in B material. CASE LGT. .468 THRU .562 .687 .875 THRU 2.50 WIRE LEADS A.W.G #24 #22 #20 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com DIA. .020 .025 .031 600 VDC L Part No. .468 .468 .468 .562 .562 .562 .562 .562 .562 .562 .562 .562 .687 .687 .687 .687 .875 .875 .875 .875 1.000 1.000 1.250 1.250 1.250 1.250 1.500 1.750 1.750 1.750 2.000 2.000 2.000 2.250 2.250 GU1G102 GU1G122 GU1G152 GU1G182 GU1G222 GU1G272 GU1G332 GU1G392 GU1G472 GU1G562 GU1G682 GU1G822 GU1G103 GU1G123 GU1G153 GU1G183 GU1G223 GU1G273 GU1G333 GU1G393 GU1G473 GU1G563 GU1G683 GU1G823 GU1G104 GU1G124 GU1G154 GU1G184 GU1G224 GU1G274 GU1G334 GU1G394 GU1G474 GU1G564 GU1G684