PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output Rev D O Type: Open Frame U Type: U-Chassis C Type: Enclosed Case DN Type: Din Rail Size: 3in x 2in x 1.16in Size: 3.6in x 2.44in x 1.54in Size: 3.6in x 2.44in x 1.54in Size: ~3.60in x 2.45in x 1.54in OPTIONS • Mechanical Type • Output Voltage • Protection Type FEATURES • • • • • • • • • • Protection Type Class I and Class II Active Power Factor Correction 2 x 3 Inch Footprint Low Leakage Current Under 75µA High Efficiency up to 92% Adjustable Output Voltage Built-In EMI Filter 5000m Operating Altitude 100 Watts Maximum Output Power 4000VAC Input to Output MOPP Insulation • • • • • • • 85~264VAC (120~370VDC) Input Voltage Range -25ºC to 80ºC Operating Temperature Range Over Voltage, Over Load, and Short Circuit Protection Low Standby Power Consumption under 0.3W Compliant to RoHS II and REACH, CE Marked Designed to Meet Efficiency Level VI ANSI/AAMI ES60601-1, EN60601-1, & IEC60601-1 3rd Edition Safety Approvals • Open Frame, U-Chassis, Enclosed Case, and Din Rail Mechanical Options Available DESCRIPTION The PSMAD100 series of AC/DC medical power supplies provides 100 watts of output power in a compact 2 x 3 inch footprint. These supplies feature a universal 85-264VAC (120~370 VDC) input, enabling them to be used anywhere in the world. The off load power draw is less than 0.3 watts, which complies with many energy-saving initiatives. 12V~48VDC single output voltages are available for this series, all of which have a ±10% adjustment range. These supplies also feature a low leakage current of less than 75μA at 264VAC and are designed to withstand 4000VAC, input to output. The PSMAD100 series has an operating temperature range of -25°C to +80°C, active power factor correction, and a high efficiency up to 92%. These supplies are also protected against short circuit, over voltage, and over current conditions. The PSMAD100 series has ANSI/AAMI ES60601-1, EN60601-1, and IEC60601-1 3rd edition medical safety approvals, is CE marked, designed to meet Efficiency Level VI, and meets the conducted and radiated EMI requirements of EN55011, EN55022 and FCC Part 18. Open frame, U-chassis, enclosed case, and DIN rail mechanical options are available. Class I and Class II protection types are also available. MODEL SELECTION TABLE (1) Model Number PSMAD100-12S-O PSMAD100-15S-O PSMAD100-24S-O PSMAD100-28S-O PSMAD100-36S-O PSMAD100-48S-O PSMAD100-12S-U PSMAD100-15S-U PSMAD100-24S-U PSMAD100-28S-U PSMAD100-36S-U PSMAD100-48S-U PSMAD100-12S-C PSMAD100-15S-C PSMAD100-24S-C PSMAD100-28S-C PSMAD100-36S-C PSMAD100-48S-C PSMAD100-12S-DN PSMAD100-15S-DN PSMAD100-24S-DN PSMAD100-28S-DN PSMAD100-36S-DN PSMAD100-48S-DN 2/23/2016 Input Voltage Range 85 - 264VAC (120 – 370VDC) 85 – 264VAC (120 – 370VDC) 85 – 264VAC (120 – 370VDC) 85 – 264VAC (120 – 370VDC) Output Voltage Output Current 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 8.34 A 6.67 A 4.17 A 3.58 A 2.78 A 2.09 A 8.34 A 6.67 A 4.17 A 3.58 A 2.78 A 2.09 A 8.34 A 6.67 A 4.17 A 3.58 A 2.78 A 2.09 A 8.34 A 6.67 A 4.17 A 3.58 A 2.78 A 2.09 A Ripple & Noise Output Power Efficiency 120mVp-p 150mVp-p 160mVp-p 180mVp-p 190mVp-p 340mVp-p 120mVp-p 150mVp-p 160mVp-p 180mVp-p 190mVp-p 340mVp-p 120mVp-p 150mVp-p 160mVp-p 180mVp-p 190mVp-p 340mVp-p 120mVp-p 150mVp-p 160mVp-p 180mVp-p 190mVp-p 340mVp-p 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 91% 92% 92% 92% 91% 91% 91% 92% 92% 92% 91% 91% 91% 92% 92% 92% 91% 91% 91% 92% 92% 92% 91% 91% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Package Type Open Frame U-Chassis Enclosed Case Din Rail Page 1 of 7 PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output Rev D SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit 264 370 63 1.15 0.55 0.3 VAC VDC Hz INPUT SPECIFICATIONS Operating Input Voltage Range Input Frequency Input Current No Load Input Power Power Factor Correction Input Inrush Current Input Protection OUTPUT SPECIFICATIONS Output Voltage Initial Set Voltage Accuracy Line Regulation Load Regulation AC Input DC Input AC Input 115VAC and Full Load 230VAC and Full Load 230VAC 85 120 47 230VAC Internal Fuse in line and Neutral 60 T3.15A/250VAC 230VAC and Full Load Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load -1.0 -0.2 -0.5 -0.4 -10 Ripple & Noise (20MHz bandwidth) With 10µF/25V 1206 X7R MLCC capacitor With 10µF/25V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 0.1µF/100V 1206 X7R MLCC capacitor Transient Response Load step from 50~75% change at 2.5A/µs See Table +1.0 +0.2 +0.5 +0.4 +10 See Table See Table 0 120 150 160 180 190 340 12V output model 15V output model 24V output model 28V output model 36V output model 48V output model Peak Deviation Recovery Time 1000 20 115VAC and Full Load 16 -0.02 % % % % mVp-p 3 Rise Time A % 500 Start-Up Time % Vout µs ms ms +0.02 ms %/ºC Continuous, Automatic Recovery 115 150 % 115 135 % % if Iout rated; Hiccup Mode % of Vout (nom); Latch Mode Natural Convection with Derating -25 -40 +85 +85 5000 Non-Condensing 5 MIL-HDBK-217F Ta=25ºC, Full Load 95 MIL-STD-810F IEC68-2-27 IEC68-2-6 790,300 ºC ºC M % RH hours See Table 60 Isolation Voltage 1 minute (2MOPP Insulation) Isolation Resistance Leakage Current 500VDC 264VAC 2/23/2016 W 0.95 Voltage Adjustability Output Power Output Current Minimum Load Hold Up Time Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Operating Altitude Relative Humidity Thermal Shock Shock Vibration MTBF GENERAL SPECIFICATIONS Efficiency Switching Frequency A Input to Output Input to F.G. Output to F.G. kHz 4000 1500 1500 0.1 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] VAC 75 GΩ µA Page 2 of 7 PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output Rev D SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit PHYSICAL SPECIFICATIONS O Type U Type C Type DN Type Weight 5.50oz (156g) 6.84oz (194g) 7.41oz (210g) 8.18oz (232g) 3in x 2in x 1.16in (76.2mm x 50.8mm x 1.16mm) 3.6in x 2.44in x 1.54in (91.4mm x 62.0mm x 1.54mm) ~3.60in x 2.45in x 1.54in (~76.3mm x 62.23mm x 39.2mm) O Type Dimensions (L x W x H) U & C Types DN Type SAFETY & EMC CHARACTERISTICS ANSI/AAMI ES60601-1 EN60601-1 IEC60601-1 Safety Approvals EMI EN55011, EN55022 and FCC Part 18 Harmonic Currents Voltage Flicker ESD Radiated Immunity Fast Transient Surge Conducted Immunity Power Frequency Magnetic Field EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Full Load EN60601-1-2 230VAC 50Hz EN60601-1-2 100VAC 50Hz Dip and Interruptions Conducted Radiated 30% 60% >95% >95% 30% 60% >95% >95% 500mS 100mS 10mS 5000mS 500mS 100mS 10mS 5000mS Class B Class A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B NOTES (1) (2) Protection types Class I and Class II are available for this series. Class I comes standard and for Class II add the suffix “B” to the model number. See page 7 for model number setup for model number setup. Din Rail option is only available for enclosed case type models. DERATING CURVES Derating Curve vs. Ambient Temperature C Type and DN Type 2/23/2016 Derating Curve vs. Ambient Temperature O Type and U Type Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 7 Rev D PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output Derating Curve vs. Input Voltage EFFICIENCY GRAPHS Efficiency vs. Output Load PSMAD100-24S-x 2/23/2016 Efficiency vs. Input Voltage PSMAD100-24S-x Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 7 Rev D PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output MECHANICAL DRAWINGS O Type: Open frame 2/23/2016 C Type: Enclosed Case Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 7 Rev D DN Type: Din Rail Notes: 1. 2. 3. 2/23/2016 PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output U Type: U-Chassis All dimensions in inch (mm) Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) M3x0.5 screw locked torque MAX 5Kgf.xm/0.49N.m Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 7 PSMAD100 SERIES 100 Watts Medical AC/DC Power Supplies Single Output Rev D CONNECTORS CON1-Input Connector Pin 1 Pin 3 CON2-Output Connector Pin 1,2 Pin 3,4 Line Neutral -Vout +Vout Mates with JST housing: VHR-4N JST crimp terminals: SVH-21T-P1.1 Mates with Mounting holes marked with must be JST housing: VHR-3N connected to safety earth for CLASS I application JST crimp terminals: SVH-21T-P1.1 MODEL NUMBER SETUP PSMAD 100 Series Name Output Power 100: 100 Watts - 12 S Output Voltage Output Quantity 12: 12VDC S: Single - O B Package Type Protection Type O: Open Frame 15: 15VDC U: U-Chassis 24: 24VDC C: Enclosed Case None: Class I B: ClassII DN: DIN Rail (1) 28: 28VDC 36: 36VDC 48: 48VDC NOTES 1. DIN Rail Option is only available for enclosed case models. COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/23/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 7 of 7