Download Datasheet

Specification for a 200-Watt Lowpass SMD LC Filter
MtronPTI P/N: LF9438
I. General & Electrical Requirements
1. Passband: 768MHz to 941MHx
2. Insertion Loss within the Passband): ≤ 0.25dB
3. VSWR: 1.5:1 maximum
4. Group Delay
Absolute within the Passband: ≤ 3.0nsec
5. Rejection:
@ 1526: 70dB minimum
6. Power Handling: ≤ 200-watts CW
7. ZIN/ZOUT: 50Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -45C to +85C
Storage: -50C to +90C
2. Solderability: Per EIAJ-STD-002
3. Package (see Figure 1):
Size: 2.00” (L) x 1.00” (W) x 0.500” (H, maximum) (ref Figure 1)
Type: SMD
Figure 1: Proposed Outline Drawing
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
Specification for a 200-Watt Lowpass SMD LC Filter
MtronPTI P/N: LF9438
III. Design Simulation Plots:
IV. Maximum Solder Reflow Profile:
V. Data Sheet Revision Table:
Date
04/16/13
Rev.
0
Author
BRM
Details of Revision
Initial Release.
Page 2 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI