Dimensions ● HXG (C-Mount version) Product Specification HXG cameras – Maximum Performance with CMOSIS sensors UNC 1/4 - 20 Full Frames [max. fps] Burst Mode (buffered) 2/3“ 2/3“ 1“ 1“ 2048 x 1088 2048 x 1088 2048 x 2048 2048 x 2048 105 105 56 56 337 337 180 180 2/3“ 1“ 2048 x 1088 2048 x 2048 105 56 337 180 Monochrome HXG20 HXG20NIR HXG40 HXG40NIR Color HXG20 HXG40 Quick Start Guide HXG cameras with CMOS sensors (Release 2) Latest software version and technical documentation are available at: 36 26 Resolution 54,7 52 36 26 Sensor Size 16xM3 deph 5 52 Camera Type 36 26 ▪▪ Dual Gigabit Ethernet progressive scan CMOS camera ▪▪ Binning, subsampling, true partial scan function (ROI) for increased frame rates ▪▪ High Dynamic Range (HDR) image acquisition ▪▪ External synchronization via industrial compliant process interface (trigger / flash) ▪▪ Global shutter architecture for minimized motion blur ▪▪ Power over Ethernet support ▪▪ Standard RJ45 connectors ▪▪ GigE VisionTM standard compliant ▪▪ Excellent image quality ▪▪ Camera parameter programmable in real-time ▪▪ Frame rates up to 105 fps (HXG20 / Monochrome) www.baumer.com/vision/login Safety Installation Conformity: Installation sample without PoE Safety instructions Notice See User´s Guide for the complete safety instructions! Installation sample with PoE via NIC 16 x M3 depth 6 open wire 1 - PoE network interface card (NIC) 2 - network cable (PoE) 3 - network cable (without PoE) 4 - Process interface cable 36 26 ▪▪ Protect the sensor from dirt and moisture. ▪▪ Never open the camera housing. ▪▪ Avoid camera contamination by foreign objects. 10 4 Environmental requirements: Storage temp. Operating temp. Housing temp. Humidity Further Information For further information on our products visit www.baumer.com For technical issues, please contact our technical support: [email protected]· Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany v1.6 07/13. 11086858 5 12,5 52 -10°C ... +70°C +5°C ... +50°C max. +50°C 10 % ... 90 % non-condensing 55 Installation sample with PoE via Injector 1 - network interface card (NIC) 2 - network cable (without PoE) 3 - Injector 4 - network cable (with PoE) 5 - Process interface cable open wire 36 26 Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occure in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures: ▪▪ Reorient or relocate the receiving antenna. ▪▪ Increase the separation between the equipment and the receiver. ▪▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ▪▪ Consult the dealer or an experienced radio/TV technician for help. UNC 1/4-20 52 FCC – Class A device open wire 1 - network interface card 2 - network cable 3 - Process interface cable 4 - Power cable 36 26 CE, FCC Part 15 Class A, RoHS Dimensions ● HXG-F (F-Mount version) 5 4 General Description LED Signaling 1 Heat Transmission Caution 3 2 Provide adequate dissipation of heat, to ensure that the temperatures does not exceed +50°C (+122°F). The surface of the camera may be hot during operation and immediately after use. Be careful when handling the camera and avoid contact over a longer period. 4 6 No. Description 3 1 2 5 No. T LED Description Signal Meaning Link active Receiving 1 (respective) lens mount 4 Digial-IO 1 green green flash 2 Power Supply 5 Data Port 2 2 yellow Transmitting 3 Data Port 1 6 Signaling-LED 3 green yellow Power On Readout active Data Interfaces Power Supply and Process Interface Data / Control Data / Control 1000 Base-T (Port 1) 1000 Base-T (Port 2) wire colors of the connecting cable LED2 8 LED2 LED1 1 8 Power Supply Digital I/O M8 / 8 pins wire colors of the connecting cable 4 LED1 3 1 1 green/white green orange/white blue blue/white orange brown/white brown MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 2 3 4 5 6 7 8 green/white green orangeg/white blue blue/white orange brown/white brown MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 3 4 brown blue black Notice Data port 1 supports Power over Ethernet (38 VDC .. 57 VDC). For the data transfer, the ports are equal. For Single GigE connect one port and for Dual GigE connect the second port additionally. The order does not matter. 3 2 5 8 6 4 1 2 3 4 5 6 7 8 T: Housing temperature Power VCC GND not used 1 2 3 4 5 6 7 8 7 white brown green yellow grey pink blue red 1 Line 5 Line 1 Line 0 GND Uex Line 3 Line 4 Line 2 Power Supply Power VCC 20 VDC ... 30 VDC measurement point It is very important to provide adequate dissipation of heat, to ensure that the housing temperature does not reach or exceed +50°C T (+122°F). As there are numerous possibilities for installation, a specific method for proper heat dissipation is not defined, but the following principles are suggested: ▪▪ Operate the cameras only in mounted condition with a good heat conductor (e.g. aluminum) ▪▪ Mounting in combination with forced convection may provide proper heat dissipation