ROHM 2SB1188T100Q

Medium power transistor (32V, 2A)
2SB1188 / 2SB1182 / 2SB1240
Dimensions (Unit : mm)
2SB1182
1.0±0.2
(3)
0.5±0.1
0.4±0.1
1.5±0.1
+0.1
0.4−0.05
0.4±0.1
1.5±0.1
1.5
0.65±0.1
0.75
2.3+0.2
−0.1
0.5±0.1
2.5
(2)
C0.5
9.5±0.5
6.5±0.2
5.1+0.2
−0.1
5.5+0.3
−0.1
1.6±0.1
(1)
Structure
Epitaxial planar type
PNP silicon transistor
+0.2
1.5 −0.1
2.5+0.2
−0.1
4.0±0.3
0.5±0.1
4.5+0.2
−0.1
1.5±0.3
2SB1188
0.9
Features
1) Low VCE(sat).
VCE(sat) = 0.5V (Typ.)
(IC/IB = 2A / 0.2A)
2) Complements the 2SD1766 / 2SD1758 / 2SD1862.
0.9
0.55±0.1
2.3±0.2 2.3±0.2
1.0±0.2
3.0±0.2
(1) (2) (3)
(1) Base
(2) Collector
(3) Emitter
ROHM : MPT3
EIAJ : SC-62
ROHM : CPT3
EIAJ : SC-63
(1) Base
(2) Collector
(3) Emitter
∗
Abbreviated symbol: BC
2SB1240
2.5±0.2
0.9
0.65Max.
0.5±0.1
(1)
(2)
14.5±0.5
1.0
4.4±0.2
6.8±0.2
(3)
2.54 2.54
1.05
ROHM : ATV
0.45±0.1
(1) Emitter
(2) Collector
(3) Base
∗ Denotes h
FE
Absolute maximum ratings (Ta=25C)
Symbol
Limits
Unit
Collector-base voltage
VCBO
−40
V
Collector-emitter voltage
VCEO
−32
V
Emitter-base voltage
VEBO
−5
V
Parameter
IC
Collector current
A(DC)
A (Pulse)∗1
0.5
W
2
W
2SB1182
10
W (Tc=25°C)
2SB1240
1
W
2SB1188
Collector power
dissipation
−2
−3
PC
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to 150
°C
∗1
∗2
∗3
∗2
∗3
Single pulse, Pw=100ms
When mounted on a 40×40×0.7 mm ceramic board.
Printed circuit board, 1.7mm thick, collector copper plating 100mm2 or larger.
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
1/3
2009.12 - Rev.B
2SB1188 / 2SB1182 / 2SB1240
Data Sheet
Electrical characteristics (Ta=25C)
Symbol
Min.
Typ.
Max.
Unit
Collector-base breakdown voltage
Parameter
BVCBO
−40
−
−
V
Collector-emitter breakdown voltage
BVCEO
−32
−
−
V
IC= −1mA
Emitter-base breakdown voltage
BVEBO
−5
−
−
V
IE= −50μA
Collector cutoff current
ICBO
−
−
−1
μA
VCB= −20V
Emitter cutoff current
IEBO
−
−
−1
μA
VEB= −4V
Collector-emitter saturation voltage
VCE(sat)
−
−0.5
−0.8
V
IC/IB= −2A/ −0.2A
hFE
120
−
390
−
Transition frequency
fT
−
100
−
MHz
Output capacitance
Cob
−
50
−
pF
DC current transfer ratio
Conditions
IC= −50μA
∗
∗
VCE= −3V, IC= −0.5A
VCE= −5V, IE=0.5A, f=100MHz
VCB= −10V, IE=0A, f=1MHz
∗ Measured using pulse current.
Packaging specifications and hFE
Package
Type
hFE
Taping
Code
T100
TL
TV2
Basic ordering unit (pieces)
1000
2500
2500
−
−
2SB1188
QR
2SB1182
QR
−
2SB1240
QR
−
−
−
hFE values are classified as follows :
Item
Q
R
hFE
120 to 270
180 to 390
Electrical characteristic curves
−200
−100
−50
−20
−10
−5
−2
−1
0 −0.2 −0.4 −0.6 −0.8 −1.0 −1.2 −1.4 −1.6 −1.8 −2.0 −2.2
BASE TO EMITTER VOLTAGE : VBE (V)
Fig.1 Grounded emitter propagation
characteristics
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (mA)
−1000 Ta=100°C
25°C
−500
−40°C
Ta=25°C
−2.5mA
−2mA
−0.4
−1.75mA
−1.5mA
−0.3
−1.25mA
−1mA
−0.2
−750μA
−500μA
−0.1
Ta=25°C
500
−2.25mA
DC CURRENT GAIN : hFE
−0.5
VCE= −3V
VCE= −6V
−3V
−1V
200
100
50
−250μA
0
0
−0.4
−0.8
−1.2
IB=0A
−1.6
−2
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.2 Grounded emitter output
characteristics
2/3
20
−5 −10 −20
−50 −100 −200 −500 −1000 −2000
COLLECTOR CURRENT : IC (mA)
Fig.3 DC current gain vs.
collector curren ( )
2009.12 - Rev.B
200
100
50
20
−5 −10 −20
−50 −100 −200 −500 −1000 −2000
−500 Ta=25°C
−200
−100
−50
−5 −10 −20
TRANSITION FREQUENCY : fT (MHz)
−1
IC /IB=10
−0.5
−0.2
−0.1
Ta=25°C
VCE= −5V
500
200
100
50
−5 −10 −20 −50 −100 −200 −500 −1000 −2000
5
10
COLLECTOR CURRENT : IC (A)
s∗
0m
=1 ∗
Pw
s
m
00
=1
Pw
COLLECTOR CURRENT : IC (A)
−5
IC Max. (pulse)
−0.5
D
C
−0.2
−0.1
−0.05
Ta=25°C
∗Single
nonrepetitive
pulse
−0.01
−0.1 −0.2 −0.5 −1
−0.02
−2
−5 −10 −20
50
100 200
500 1000 2000
−100
−50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.10 Safe operation area
(2SB1188)
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
−2
IC Max. (Pulse)
Ta=100°C
25°C
−40°C
−50
−20
−5 −10 −20
−50 −100 −200 −500 −1000 −2000
Fig.6 Collector-emitter saturation
voltage vs. collector current ( )
300
Ta=25°C
f=1MHz
IE=0A
IC=0A
Cib
200
100
Cob
50
20
10
−0.5
−1
−2
−5
−10
−20 −30
COLLECTOR TO BASE VOLTAGE : VCB (V)
EMITTER TO BASE VOLTAGE
: VEB (V)
Fig.8 Gain bandwidth product vs.
emitter current
Fig.7 Base-emitter saturation voltage
vs. collector current
−1
20
EMITTER CURRENT : IE (mA)
COLLETOR CURRENT : IC (mA)
−2
−200
COLLECTOR CURRENT : IC (mA)
Fig.5 Collector-emitter saturation
voltage vs. collector current ( )
Ta=25°C
−5
−50 −100 −200 −500 −1000 −2000
−500 lC/lB=10
COLLECTOR CURRENT : IC (mA)
Fig.4 DC current gain vs.
collector current ( )
BASE SATURATION VOLTAGE : VBE(sat)(V)
20
10
COLLECTOR CURRENT : IC (mA)
−0.05
IC/IB=50
COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
EMITTER INPUT CAPACITANCE
: Cib (pF)
DC CURRENT GAIN : hFE
Ta=100°C
25°C
−25°C
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
VCE= −3V
500
Data Sheet
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
2SB1188 / 2SB1182 / 2SB1240
Fig.9 Collector output capacitance vs.
collector-base voltage
Emitter input capacitance vs.
emitter-base voltage
PW=500μs
DC
−1
−0.5
PW=1ms
PW=100ms
−0.2
−0.1
−0.05
Ta=25°C
∗Single
nonrepetitive
pulse
−0.01
−0.1 −0.2 −0.5 −1
−0.02
−2
−5 −10 −20
−50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.11 Safe operation area
(2SB1182)
3/3
2009.12 - Rev.B
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A