RFD8P06E, RFD8P06ESM, RFP8P06E
Data Sheet
July 1999
8A, 60V, 0.300 Ohm, P-Channel Power
MOSFETs
File Number
3937.5
Features
• 8A, 60V
These are P-Channel power MOSFETs manufactured using
the MegaFET process. This process, which uses feature
sizes approaching those of LSI integrated circuits gives
optimum utilization of silicon, resulting in outstanding
performance. They were designed for use in applications
such as switching regulators, switching converters, motor
drivers, relay drivers and emitter switches for bipolar
transistors. These transistors can be operated directly from
integrated circuits.
The RFD8P06E, RFD8P06ESM and RFP8P06E incorporate
ESD protection and are designed to withstand 2kV (Human
Body Model) of ESD.
• rDS(ON) = 0.300Ω
• Temperature Compensating PSPICE® Model
• 2kV ESD Protected
• Peak Current vs Pulse Width Curve
• UIS Rating Curve
• 175oC Operating Temperature
• Related Literature
- TB334 “Guidelines for Soldering Surface Mount
Components to PC Boards”
Symbol
Formerly developmental type TA49044.
D
Ordering Information
PART NUMBER
PACKAGE
BRAND
RFP8P06E
TO-220AB
RFP8P06E
RFD8P06ESM
TO-252AA
D8P06E
RFD8P06E
TO-251AA
D8P06E
G
S
NOTE: When ordering, use the entire part number. Add the suffix 9A
to obtain the TO-252AA variant in tape and reel, i.e.
RFD8P06ESM9A.
Packaging
JEDEC TO-220AB
JEDEC TO-251AA
SOURCE
DRAIN
GATE
DRAIN (FLANGE)
SOURCE
DRAIN
GATE
DRAIN (FLANGE)
JEDEC TO-252AA
DRAIN (FLANGE)
GATE
SOURCE
4-117
CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures.
PSPICE® is a registered trademark of MicroSim Corporation.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999.
RFD8P06E, RFD8P06ESM, RFP8P06E
Absolute Maximum Ratings
TC = 25oC
Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS
Drain to Gate Voltage (RGS = 20KΩ) (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR
Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS
Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID
Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM
Single Pulse Avalanche Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrostatic Discharge Rating MIL-STD-883, Category B(2) . . . . . . . . . . . . . . . . . . . .ESD
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG
Maximum Temperature for Soldering
Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL
Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg
RFD8P06E, RFD8P06ESM, RFP8P06E
-60
-60
±20
8
Refer to Peak Current Curve
Refer to UIS Curve
48
0.32
2
-55 to 175
UNITS
V
V
V
A
A
300
260
oC
oC
W
W/oC
kV
oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. TJ = 25oC to 150oC.
Electrical Specifications
TC = 25oC, Unless Otherwise Specified
MIN
TYP
MAX
UNITS
Drain to Source Breakdown Voltage
PARAMETER
SYMBOL
BVDSS
ID = 250µA, VGS = 0V
-60
-
-
V
Gate Threshold Voltage
VGS(TH)
VGS = VDS, ID = 250µA
Zero Gate Voltage Drain Current
IDSS
Gate to Source Leakage Current
Drain to Source On Resistance (Note 3)
IGSS
rDS(ON)
Turn-On Time
tON
Turn-On Delay Time
td(ON)
Rise Time
Turn-Off Delay Time
Fall Time
Turn-Off Time
TEST CONDITIONS
-2.0
-
-4.0
V
VDS = Rated BVDSS, VGS = 0V
-
-
-1.0
µA
VDS = 0.8 x Rated BVDSS, TC = 150oC
-
-
-25
µA
VGS = ±20V
-
-
±10
µA
ID = 8A, VGS = -10V
-
-
0.300
Ω
VDD = -30V, ID ≈ 8A,
RL = 3.75Ω, VGS = -10V, RG = 2.5Ω
(Figure 13)
-
-
70
ns
-
15
-
ns
tr
-
30
-
ns
td(OFF)
-
40
-
ns
tf
-
25
-
ns
-
-
100
ns
-
30
36
nC
tOFF
Total Gate Charge
Qg(TOT)
VGS = 0 to -20V
Gate Charge at 5V
Qg(-10)
VGS = 0 to -10V
Threshold Gate Charge
Qg(TH)
VGS = 0 to -2V
VDD = -48V, ID = 8A,
RL = 6Ω
Ig(REF) = -1.45mA
-
15
18
nC
-
1.15
1.5
nC
VDS = -25V, VGS = 0V,
f = 1MHz
-
600
-
pF
-
160
-
pF
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
-
35
-
pF
Thermal Resistance Junction to Case
RθJC
Figure 12
-
-
3.125
oC/W
Thermal Resistance Junction to Ambient
RθJA
TO-220
-
-
62
oC/W
TO-251, TO-252
-
-
100
oC/W
Source to Drain Diode Specifications
PARAMETER
SYMBOL
Source to Drain Diode Voltage
VSD
Diode Reverse Recovery Time
trr
TEST CONDITIONS
MIN
TYP
MAX
ISD = -8A
-
-
-1.5
V
ISD = -8A, dISD/dt = -100A/µs
-
-
125
ns
NOTES:
2. Pulse test: pulse width ≤ 300µs, duty cycle ≤ 2%.
3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3).
4-118
UNITS
RFD8P06E, RFD8P06ESM, RFP8P06E
Typical Performance Curves
Unless Otherwise Specified
POWER DISSIPATION MULTIPLIER
1.2
-10
ID , DRAIN CURRENT (A)
1.0
0.8
0.6
0.4
0.2
0
-8
-6
-4
-2
0
0
25
50
75
100
125
TC , CASE TEMPERATURE (oC)
150
25
175
50
75
100
125
150
175
TC , CASE TEMPERATURE (oC)
FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE
TEMPERATURE
FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs
CASE TEMPERATURE
THERMAL IMPEDANCE
ZθJC , NORMALIZED
1
0.5
0.2
0.1
PDM
0.1
0.05
t1
t2
0.02
0.01
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJC x RθJC + TC
SINGLE PULSE
0.01
10-5
10-4
10-3
10-2
10-1
t 1, RECTANGULAR PULSE DURATION (s)
100
101
FIGURE 3. NORMALIZED TRANSIENT THERMAL IMPEDANCE
-102
TC = 25oC, TJ = MAX RATED
100µs
-10
1ms
10ms
-1
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(ON)
-0.1
-1
100ms
DC
-10
VDS , DRAIN TO SOURCE VOLTAGE (V)
FIGURE 4. FORWARD BIAS SAFE OPERATING AREA
4-119
-100
IDM , PEAK CURRENT (A)
ID , DRAIN CURRENT (A)
-100
FOR TEMPERATURES ABOVE 25oC
DERATE PEAK CURRENT
CAPABILITY AS FOLLOWS:
175 – T C
I = I 25 ----------------------
150
VGS = -20V
VGS = -10V
-10
-5
10-6
TC = 25oC
TRANSCONDUCTANCE
MAY LIMIT CURRENT
IN THIS REGION
10-5
10-4
10-3
10-2
10-1
t, PULSE WIDTH (s)
100
FIGURE 5. PEAK CURRENT CAPABILITY
101
RFD8P06E, RFD8P06ESM, RFP8P06E
Typical Performance Curves
Unless Otherwise Specified
(Continued)
-20
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX
TC = 25oC
STARTING TJ = 25oC
ID , DRAIN CURRENT (A)
IAS , AVALANCHE CURRENT (A)
-30
-10
STARTING TJ = 150oC
If R = 0
tAV = (L) (IAS) / (1.3RATED BVDSS - VDD)
0.1
1
VGS = -7V
-10
VGS = -6V
-5
VGS = -4.5V
0
-1.5
NORMALIZED DRAIN TO SOURCE
ON RESISTANCE
IDs(ON) , DRAIN TO SOURCE CURRENT (A)
-10
175oC
-5
0
-4
-6
-8
2.0
1.5
1.0
0.5
0
-80
-10
-40
NORMALIZED DRAIN TO SOURCE
BREAKDOWN VOLTAGE
NORMALIZED GATE
THRESHOLD VOLTAGE
2.0
1.5
1.0
0.5
0
40
80
120
160
200
TJ , JUNCTION TEMPERATURE (oC)
FIGURE 10. NORMALIZED GATE THRESHOLD VOLTAGE vs
TEMPERATURE
4-120
40
80
120
160
200
FIGURE 9. NORMALIZED DRAIN TO SOURCE ON
RESISTANCE vs JUNCTION TEMPERATURE
VGS = VDS, ID = 250µA
-40
0
TJ , JUNCTION TEMPERATURE (oC)
FIGURE 8. TRANSFER CHARACTERISTICS
0
-80
-7.5
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX
VGS = -10V, ID = 8A
VGS, GATE TO SOURCE VOLTAGE (V)
2.0
-6.0
2.5
25oC
-2
-4.5
FIGURE 7. SATURATION CHARACTERISTICS
-55oC
-15
0
-3.0
VDS, DRAIN TO SOURCE VOLTAGE (V)
FIGURE 6. UNCLAMPED INDUCTIVE SWITCHING
VDD = -15V
PULSE DURATION = 250µs
DUTY CYCLE = 0.5% MAX
VGS = -5V
0
10
tAV, TIME IN AVALANCHE (ms)
-20
VGS = -8V
VGS = -20V
If R ≠ 0
tAV = (L/R) ln [(IAS*R) / (1.3 RATED BVDSS - VDD) + 1]
-1
0.01
VGS = -10V
-15
ID = 250µA
1.5
1.0
0.5
0
-80
-40
0
40
80
120
160
200
TJ , JUNCTION TEMPERATURE (oC)
FIGURE 11. NORMALIZED DRAIN TO SOURCE BREAKDOWN
VOLTAGE vs TEMPERATURE
RFD8P06E, RFD8P06ESM, RFP8P06E
(Continued)
-10.0
VGS = 0V, f = 1MHz
VDS , DRAIN TO SOURCE VOLTAGE (V)
-60
1000
VGS = 0V, f = 1MHz
CISS = CGS + CGD
CRSS = CGD
COSS ≈ CDS + CGS
800
C, CAPACITANCE (pF)
Unless Otherwise Specified
CISS
600
400
COSS
200
CRSS
VDD = BVDSS
-7.5
-45
RL = 1.2Ω
IG(REF) = 1.45mA
-30
-15
-5
-10
-15
-20
0.75 BVDSS
0.50 BVDSS
0.50 BVDSS
0.25 BVDSS
0.25 BVDSS
-2.5
0.0
-25
20
VDS , DRAIN TO SOURCE VOLTAGE (V)
NOTE:
FIGURE 12. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE
-5.0
0.75 BVDSS
VGS = -10V
0
0
0
VDD = BVDSS
IG(REF)
t, TIME (µs)
IG(ACT)
80
IG(REF)
IG(ACT)
Refer to Intersil Application Notes AN7254 and AN7260.
FIGURE 13. NORMALIZED SWITCHING WAVEFORMS FOR
CONSTANT GATE CURRENT
Test Circuits and Waveforms
VDS
tAV
L
0
VARY tP TO OBTAIN
REQUIRED PEAK IAS
-
RG
VDD
+
0V
VDD
DUT
tP
IAS
IAS
VDS
tP
0.01Ω
-VGS
BVDSS
FIGURE 14. UNCLAMPED ENERGY TEST CIRCUIT
FIGURE 15. UNCLAMPED ENERGY WAVEFORMS
tON
tOFF
td(OFF)
td(ON)
tr
0
RL
VDS
0
90%
90%
10%
DUT
50%
-VGS
VGS
FIGURE 16. SWITCHING TIME TEST CIRCUIT
4-121
10%
10%
-
VDS
0V
RGS
tf
+
VGS
VGS , GATE TO SOURCE VOLTAGE (V)
Typical Performance Curves
50%
PULSE WIDTH
90%
FIGURE 17. RESISTIVE SWITCHING WAVEFORMS
RFD8P06E, RFD8P06ESM, RFP8P06E
Test Circuits and Waveforms
(Continued)
VDS
VDS
Qg(TH)
0
RL
VGS = -2V
VGS = -10V
-VGS
VGS
-
Qg(-10)
VDD
+
VGS = -20V
VDD
DUT
Qg(TOT)
Ig(REF)
0
Ig(REF)
FIGURE 18. GATE CHARGE TEST CIRCUIT
4-122
FIGURE 19. GATE CHARGE WAVEFORMS
RFD8P06E, RFD8P06ESM, RFP8P06E
PSPICE Electrical Model
.SUBCKT RFP8P06E 2 1 3
REV 6/23/94
LDRAIN
CA 12 8 7.24e-10
CB 15 14 8.04e-10
CIN 6 8 6.00e-10
5
10
2
DRAIN
DPLCAP
5
51
RGATE
9
1
VTO
-
+
-
16
DBODY
MOS2
RIN
11
MOS1
6
DBREAK
CIN
91
DESD2
LDRAIN 2 5 1e-10
LGATE 1 9 2.92e-9
LSOURCE 3 7 2.92e-9
17
18
21
DESD1
IT 8 17 1
RDRAIN
6
8
-
18
20 8
LGATE
EBREAK
EVTO
+
GATE
ESCL
+
ESG
+
EBREAK 5 11 17 18 -79.2
EDS 14 8 5 8 1
EGS 13 8 6 8 1
ESG 5 10 6 8 1
EVTO 20 6 8 18 1
RSCL1
RSCL2
DBODY 5 7 DBDMOD
DBREAK 7 11 DBKMOD
DESD1 91 9 DESD1MOD
DESD2 91 7 DESD2MOD
DPLCAP 10 6 DPLCAPMOD
8
RSOURCE
LSOURCE
7
S1A
MOS1 16 6 8 8 MOSMOD M=0.99
MOS2 16 21 8 8 MOSMOD M=0.01
RBREAK 17 18 RBKMOD 1
RDRAIN 50 16 RDSMOD 95.2e-3
RGATE 9 20 3.95
RIN 6 8 1e9
RSCL1 5 51 RSCLMOD 1e6
RSCL2 5 50 1e3
RSOURCE 8 7 RDSMOD 143.6e-3
RVTO 18 19 RVTOMOD 1
12
S2A
13
8
S1B
14
13
13
CA
+
6
EGS
- 8
15
3
SOURCE
RBREAK
17
18
S2B
RVTO
CB
14
+
5
EDS
8
-
IT
19
-
VBAT
+
S1A 6 12 13 8 S1AMOD
S1B 13 12 13 8 S1BMOD
S2A 6 15 14 13 S2AMOD
S2B 13 15 14 13 S2BMOD
VBAT 8 19 DC 1
VTO 21 6 -0.804
ESCL 51 50 VALUE={(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)*1e6/22,9))}
.MODEL DBDMOD D (IS=4.15e-15 RS=5.54e-2 TRS1=-1.32e-3 TRS2=-2.48e-6 CJO=6.06e-10 TT=7.50e-8)
.MODEL DBKMOD D (RS=4.66e-1 TRS1=1.58e-3 TRS2=-7.49e-6)
.MODEL DESD1MOD D (BV=20.2 TBV1=-1.25e-3 TBV2=5.79e-7 RS=36 NBV=50 IBV=7e-6)
.MODEL DESD2MOD D (BV=25.4 TBV1=-8.3e-4 TBV2=8.9e-7 NBV=50 IBV=7e-6)
.MODEL DPLCAPMOD D (CJO=2.49e-10 IS=1e-30 N=10)
.MODEL MOSMOD PMOS (VTO=-3.824 KP=5.163 IS=1e-30 N=10 TOX=1 L=1u W=1u)
.MODEL RBKMOD RES (TC1=9.48e-4 TC2=-1.42e-7)
.MODEL RDSMOD RES (TC1=5.40e-3 TC2=1.25e-5)
.MODEL RSCLMOD RES (TC1=1.75e-3 TC2=3.90e-6)
.MODEL RVTOMOD RES (TC1=-3.55e-3 TC2=-3.43e-6)
.MODEL S1AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=5.10 VOFF=3.10)
.MODEL S1BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=3.10 VOFF=5.10)
.MODEL S2AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=2.1 VOFF=-2.9)
.MODEL S2BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-2.9 VOFF=2.1)
.ENDS
NOTE: For further discussion of the PSPICE model consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global Temperature Options;
written by William J. Hepp and C. Frank Wheatley.
4-123
RFD8P06E, RFD8P06ESM, RFP8P06E
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (407) 724-7000
FAX: (407) 724-7240
4-124
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
ASIA
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029