P24ALD-Series 100…900 mA Step-Up LED Driver ● ● ● ● ● ● ● Power LED Driver with constant current output High efficiency up to 95 % Wide input voltage range Open circuit and short circuit protection Adjustable output current On/Off - remote control input Standard 2" x 1" package Model guide Type P24ALD010 P24ALD015 P24ALD025 P24ALD030 P24ALD035 P24ALD050 P24ALD060 P24ALD070 P24ALD090 Input voltage range [VDC] 9...36 9...36 9...36 9...36 9...36 9...18 18…36 9...18 18…36 9...18 18…36 20…30 Vin under voltage protection Lock in Lock out [V] typ. [V] typ. 7.6 6.8 7.6 6.8 7.6 6.8 7.6 6.8 7.6 6.8 7.6 6.8 7.6 6.8 7.6 6.8 15.6 14.6 Output voltage range [VDC] 14…48 14…48 14…48 14…48 14…48 14…45 23…48 14…38 23…48 14…32 23…48 25…48 Output current Output power Ripple & noise Efficiency typ. Capacity load max. [mA] nom. 100 150 250 300 350 [w] max. 4.8 7.2 12 14 16.8 [mV] max. 250 350 450 450 600 [%] 83…88 86…91 89…93 89…94 89.5…94 [µF] 47 100 100 100 100 500 24 650 90…95 47 600 28.8 650 91…95 47 700 33.6 700 91.5…95 47 900 43.2 400 92…95 47 Specifications Input Filter: Enable input -EN- Pin 3 On / Off Enable input “EN” Control current “EN” input "Off" state idle input current Input -DIM- Pin 2 (analog control mode) “Off” state control voltage Control voltage Dim range “On” state Dim control current Input -DIM- Pin 2 (PWM control mode) “On” state threshold level “Off” state threshold level PWM-frequency Output Current accuracy Over voltage protection Short circuit protection Restart after short circuit General Switching frequency Standard in accordance with Capacitor “On” Open EN-input “Off” connected to “–Vin” < 1.5 µA @ < 3 V 1.3 mA @ Vin 9…32 V 8 mA @ Vin 32…36 V 0 … 0.3 V 0.4 … 1.7 V for Iout: 0 … 100 % 1.7 … 5 V (8 V max. absolute) < 1.5 µA @ 0.4 …1.7 V DIM 0.4 … 5 V (8 V max. absolute) 0 … 0.3 V 100 Hz … 1 kHz ±5 % 52 V Continuously After removed short circuit and an input voltage interruption Softstart time, without C-load 50 ms, max. Temperature coefficient ± 0.03 % / °C Radiated emissions EMS immunity ESD Radiated immunity Fast transient * Surge * Conducted immunity PFMF Reliability calculated (MIL-HDBK-217 F) Environmental Operating temperature Storage temperature Maximum case temp. Thermal imdance Humidity Physical Dimensions Weight Case material Potting material Absolute maximum ratings Soldering temperature 370 kHz, typ. EN / IEC 60950-1 EN / IEC 61347-2-13 UL8750 EN55015 EN61547 EN61000-4-2 perf. criteria A EN61000-4-3 perf. criteria A EN61000-4-4 perf. criteria A EN61000-4-5 perf. criteria A EN61000-4-6 pref. criteria A EN61000-4-8 pref. criteria A MTBF > 840 k hours -40°C … 85°C (with derating) -55 °C to +125 °C +105 °C 17 K/W @ free air convection 95 % rel. Humidity 26.1 x 51.5 x 15.8 mm 38 g Plastic, UL94-V0 rated Epoxy, UL94-V0 rated 260°C, 10s, 1.5mm from case Page 1 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver EMC circuit suggestion AC Frontend optional +Vin 15 µH 4A P24ALD 5.6 mH 5A ~Vin 1 5 +Out Dim 2 6.5..25 V 0.1 µF 47 µF 100 V 330 µF 100 V 330 µF 100 V EN 3 4 ~Vin -Vin 15 µH 4A 5.6 mH 5A 6 -Out Efficiency vs output load Page 2 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver Dim application circuit analog P24ALD 1 +Vin 5 +Out Dim 2 Analog input VDIM 0.3 V …1.7 V IOut 0…100 % EN 3 -Vin 4 6 -Out Page 3 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver Dim circuit analog application via potentiometer and external stabilised 5 V P24ALD 1 +Vin 5 +Out 5V 220 k Dim Inom: 1.8 V…5 V Dim: 0.4...1.7 V 100 k Off: ≤ 0.3 V EN 2 3 22 k 4 -Vin 6 -Out Dim circuit analog application via potentiometer and voltage reference via TL431 +Vin P24ALD 15 k 1 2.495V 47 k Dim 100 k EN TL431 5 +Out 2 3 18 k 4 -Vin Dim circuit PWM application 6 -Out P24ALD 1 +Vin 0V / 5V level 5 +Out Dim 2 PWM input signal IOut 0…100 % EN 3 -Vin 4 6 -Out Page 4 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver Dim circuit PWM application with signal level +Vin P24ALD 5.6 k +Out 1 12 k 5 Dim 2 2SK3018 EN 3 PWM input 4.7 V 300 mW 4 -Vin 6 -Out Application circuit multi string P24ALD +Vin 1 5 +Out Dim 2 EN 3 4 6 -Vin -Out Enable input, Under voltage protection P24ALD 1 +Vin +Out 5 Dim 2 2SK3018 Off EN On 3 Enable input Rx 4 -Vin Rx Type P24ALD010 P24ALD015 P24ALD025 P24ALD030 P24ALD035 P24ALD050 P24ALD060 P24ALD070 [kΩ] ∞ 12 10 7.5 4.7 3.3 2.7 2.4 2.0 1.8 Vin threshold lock in [V] 7.6 11 11.5 13 16.2 20.5 23.2 25.0 28.5 30.8 6 -Out Rx Vin threshold lock out [V] 6.8 10.2 10.7 12.2 15.4 19.7 22.2 24.0 27.5 29.8 Type P24ALD090 [kΩ] ∞ 12 10 7.5 Vin threshold lock in [V] 15.6 21.5 22.5 25.0 Vin threshold lock out [V] 14.6 19.7 20.7 22.5 Page 5 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver Page 6 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected] P24ALD-Series 100..900 mA Step-Up LED Driver Designation key P PHI-CON Nominal input voltage 24 24 V Series designation A Function LD LED Driver Output current 010 100 mA 015 150 mA 025 250 mA 030 300 mA 035 350 mA 050 500 mA 060 600 mA 070 700 mA 090 900 mA Dimensions Dimensions in mm 1. Pin tolerance ± 0.05 mm 2. Pin pitch & lenght tolerance ± 0.05 mm 3. Case tolerance: ± 0.5 mm Pin assignment 1 +Vin 2 Dim 3 Enable 4 -Vin 5 +LED output 6 -LED output PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals! Not for resale or distribution to the general public in any way! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 06.2016 f Page 7 of 7 Deutschland: Inselkammerstrasse 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Hochstrasse 355 CH-8200 Schaffhausen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected]