VS-GB50TP120N www.vishay.com Vishay Semiconductors Molding Type Module IGBT, 2 in 1 Package, 1200 V, 50 A FEATURES • High short circuit capability, self limiting to 6 x IC • 10 μs short circuit capability • VCE(on) with positive temperature coefficient • Maximum junction temperature 150 °C • Low inductance case • Fast and soft reverse recovery antiparallel FWD • Isolated copper baseplate using DCB (Direct Copper Bonding) technology INT-A-PAK • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRODUCT SUMMARY • AC inverter drives VCES 1200 V IC at TC = 80 °C 50 A VCE(on) (typical) at IC = 50 A, 25 °C 1.75 V Speed 8 kHz to 30 kHz Package INT-A-PAK Circuit Half bridge • Switching mode power supplies • Electronic welders DESCRIPTION Vishay’s IGBT power module provides ultra low conduction loss as well as short circuit ruggedness. It is designed for applications such as general inverters and UPS. ABSOLUTE MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MAX. Collector to emitter voltage VCES 1200 Gate to emitter voltage VGES ± 20 Collector current Pulsed collector current TC = 25 °C IC ICM (1) UNITS V 100 TC = 80 °C 50 tp = 1 ms 100 Diode continuous forward current IF 50 Diode maximum forward current IFM 100 A Maximum power dissipation PD TJ = 150 °C 446 W Short circuit withstand time tSC TJ = 125 °C 10 μs RMS isolation voltage I2t-value, diode VISOL I2t f = 50 Hz, t = 1 min 2500 V VR = 0 V, t = 10 ms, TJ = 125 °C 420 A2s Note (1) Repetitive rating: pulse width limited by maximum junction temperature. IGBT ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted) PARAMETER Collector to emitter breakdown voltage SYMBOL V(BR)CES Collector to emitter voltage VCE(on) Gate to emitter threshold voltage TEST CONDITIONS MIN. TYP. MAX. 1200 - - VGE = 15 V, IC = 50 A, TJ = 25 °C - 1.75 2.15 VGE = 15 V, IC = 50 A, TJ = 125 °C - 2.0 7.0 VGE = 0 V, IC = 1.0 mA, TJ = 25 °C UNITS V VGE(th) VCE = VGE, IC = 2.0 mA, TJ = 25 °C 5.0 6.2 Collector cut-off current ICES VCE = VCES, VGE = 0 V, TJ = 25 °C - - 5.0 mA Gate to emitter leakage current IGES VGE = VGES, VCE = 0 V, TJ = 25 °C - - 400 nA Revision: 10-Jun-15 Document Number: 94820 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB50TP120N www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS PARAMETER SYMBOL Turn-on delay time TEST CONDITIONS td(on) Rise time tr Turn-off delay time VCC = 600 V, IC = 50 A, Rg = 15 , VGE = ± 15 V, TJ = 25 °C td(off) Fall time tf MIN. TYP. MAX. - 382 - - 74 - - 379 - - 380 - Turn-on switching loss Eon - 6.28 - Turn-off switching loss Eoff - 3.23 - Turn-on delay time td(on) - 403 - tr - 72 - - 404 - Rise time Turn-off delay time VCC = 600 V, IC = 50 A, Rg = 15 , VGE = ± 15 V, TJ = 125 °C td(off) Fall time tf - 381 - Turn-on switching loss Eon - 7.30 - Turn-off switching loss Eoff - 5.22 - - 4.29 - - 0.30 - - 0.20 - - 270 - Input capacitance Cies Output capacitance Coes Reverse transfer capacitance Cres SC data ISC VGE = 0 V, VCE = 25 V, f = 1.0 MHz, TJ = 25 °C tsc 10 μs, VGE = 15 V, TJ = 125 °C, VCC = 900 V, VCEM 1200 V UNITS ns mJ ns mJ nF A Internal gate resistance Rgint - 10 - Stray inductance LCE - - 30 nH RCC’+EE’ - 0.75 - m UNITS Module lead resistance, terminal to chip DIODE ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Diode forward voltage VF Diode reverse recovery charge Qrr Diode peak reverse recovery current Irr Diode reverse recovery energy TEST CONDITIONS IF = 50 A IF = 50 A, VR = 600 V, dIF/dt = -830 A/μs, VGE = -15 V Erec MIN. TYP. MAX. TJ = 25 °C - 2.05 2.45 TJ = 125 °C - 2.10 - TJ = 25 °C - 3.32 - TJ = 125 °C - 6.51 - TJ = 25 °C - 33.8 - TJ = 125 °C - 46.9 - TJ = 25 °C - 1.28 - TJ = 125 °C - 2.03 - V μC A mJ THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Operating junction temperature Storage temperature range TEST CONDITIONS MIN. TYP. MAX. TJ - - 150 TSTG -40 - 125 - - 0.28 - - 0.49 - 0.05 - °C IGBT (per 1/2 module) Junction to case Diode (per 1/2 module) Case to sink RthJC RthCS Conductive grease applied Power terminal screw: M5 2.5 to 5.0 Mounting screw: M6 3.0 to 5.0 Mounting torque Weight of module UNITS K/W Nm 150 g Revision: 10-Jun-15 Document Number: 94820 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB50TP120N www.vishay.com Vishay Semiconductors 25 100 VCC = 600 V Rg = 15 Ω VGE = ± 15 V TJ = 125 °C 90 80 20 25 °C 60 E on, Eoff (mJ) IC (A) 70 125 °C 50 40 Eon 15 10 30 20 Eoff 5 10 VGE = 15 V 0 0 0 0.5 1 1.5 2 2.5 0 3 40 60 80 VCE (V) IC (A) Fig. 1 - Typical Output Characteristics Fig. 3 - Switching Loss vs. IC 100 25 80 20 E on, Eoff (mJ) 70 125 °C 60 50 25 °C 40 15 Eon 10 Eoff 30 20 100 VCC = 600 V IC = 50 A VGE = ± 15 V TJ = 125 °C 90 IC (A) 20 5 10 VCE = 20 V 0 0 6 7 8 9 10 11 0 12 20 40 60 80 100 Rg (Ω) VGE (V) Fig. 4 - Switching Loss vs. Rg Fig. 2 - Typical Transfer Characteristics 120 105 90 IC, Module IC (A) 75 60 45 30 Rg = 15 Ω VGE = ± 15 V TJ = 125 °C 15 0 0 250 500 750 1000 1250 1500 VCE (V) Fig. 5 - RBSOA Revision: 10-Jun-15 Document Number: 94820 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB50TP120N www.vishay.com Vishay Semiconductors 100 ZthJC (K/W) IGBT 10-1 10-2 10-3 10-2 10-1 100 101 t (s) Fig. 6 - IGBT Transient Thermal Impedance 100 4 90 3.5 VCC = 600 V Rg = 15 Ω VGE = - 15 V TJ = 125 °C 80 3 25 °C 60 2.5 E (mJ) IC (A) 70 125 °C 50 Erec 2 40 1.5 30 1 20 0.5 10 0 0 0 0.5 1 1.5 2 2.5 3 0 20 40 60 80 100 IF (A) VF (V) Fig. 7 - Diode Forward Characteristics Fig. 8 - Diode Switching Loss vs. IC 3 2.5 E (mJ) 2 Erec 1.5 1 VCC = 600 V IC = 50 A VGE = - 15 V TJ = 125 °C 0.5 0 0 20 40 60 80 100 Rg (Ω) Fig. 9 - Diode Switching Loss vs. Rg Revision: 10-Jun-15 Document Number: 94820 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB50TP120N www.vishay.com Vishay Semiconductors 100 ZthJC (K/W) Diode 10-1 10-2 10-3 10-2 10-1 100 101 t (s) Fig. 10 - Diode Transient Thermal Impedance CIRCUIT CONFIGURATION 6 7 1 2 3 5 4 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95524 Revision: 10-Jun-15 Document Number: 94820 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000