Dimensions ● Standard Cameras: TXG series – Innovative functionality in compact design Quick Start Guide TXG Cameras (Gigabit Ethernet) 140 90 56 64 28 32 20 20 30 16 15 26 26 8x M 3 [max. fps] 36 36 48 ● Standard Cameras with Power over Ethernet (PoE): C-Mount 6,5 26 4x 36 ● Standard Cameras with additional I/Os: C-Mount 6,5 26 Tested according to standard EMVA 1288 ▪▪ UL – Class III device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructios, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occure in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures: ▪▪ Reorient or relocate the receiving antenna. ▪▪ Increase the separation between the equipment and the receiver. ▪▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ▪▪ Consult the dealer or an experienced radio/TV technician for help. The power supply to operate the TXG series of cameras must be realized using a limited power supply in accordance to UL60950. Clock RAM Operating system (OS) Safety Precautions ▪▪ Protect the sensor from dirt and moisture. ▪▪ Never open the camera housing. ▪▪ Avoid camera contamination by foreign objects. Graphic Ethernet Framework (optional) 8xM 3 36 C-Mount 56 Ø 65 FCC – Class B device ● Standard Cameras with IP67 housing: M 62 x 1,5 CPU Single-camera system Multi-camera system Minimum Recommended Minimum Recommended ® ® Intel Pentium 4 ® or comparable Intel Core™ Duo comparable processor processor 2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz 1024 MB 2048 MB 2048 MB > 2048 MB Microsoft® Windows® XP incl. Service Pack 2 or higher Microsoft® Windows® XP x64 incl. Service Pack 2 or higher Microsoft® Windows Vista™ 32 / 64 bit systems Microsoft® Windows 7 32 / 64 bit systems Linux® 32 / 64 bit systems from Kernel 2.6.xx recommended resolution 1280 x 1024, color depth at least 16 bit Gigabit Ethernet compliant NIC (recommended Intel® chipset) Windows® OS: .NET™ Framework 2.0 or higher Linux® OS: Mono 1.2.4 or higher 5 CE, FCC Part 15 Class B, UL (standard cameras only), RoHS Dimensions 4xM Conformity: 58,3 ● Protective Caps IP67: Environmental requirements: Storage temp. Operating temp. Housing temp. Humidity -10°C ... +70°C +5°C ... +50°C max. +50°C 10 % ... 90 % Non-condensing Further Information For further information on our products visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 04/16. v4.6 11037533 M3 36 48 Ø 65 System Requirements 56 Safety 36 26 26 36 Latest software version and technical documentation are available at: M3 36 57,7 4x www.baumer.com/vision/login 3 M 36 656x494 656 x 494 / 656 x 490 656 x 494 776 x 582 / 776 x 578 1032 x 776 / 1032 x 772 1296x966 1392 x 1040 / 1384 x 1036 1392 x 1040 / 1384 x 1036 1392 x 1040 1624 x 1236 / 1624 x 1232 2448 x 2050 / 2448 x 2050 4x 26 1/4“ 1/3" 1/2" 1/2" 1/3" 1/3“ 1/2" 2/3" 2/3" 1/1.8" 2/3" Full Frames 26 Size 26 8xM 3 Monochrome / Color TXG02 / TXG02c TXG03 / TXG03c TXG04 TXG06 / TXG06c TXG08 / TXG08c TXG12 / TXG12c TXG13 / TXG13c TXG14 / TXG14c TXG14f TXG20 / TXG20c TXG50 / TXG50c Resolution 36 Sensor 36 ▪▪ Output of excellent 8 / 12 bit image data ▪▪ VGA up to 5 megapixel, monochrome and color ▪▪ RGB and YUV interpolation algorithms on board ▪▪ Bandwidth up to 1000 Mbit/sec for fast multi-camera operation ▪▪ Flexible system architecture due to cable length up to 100 m ▪▪ Baumer driver for reliable image transfer Camera Type 6,5 C-Mount 36 Product Specification 51,8 Tube Length [mm] 51,8 61,8 70,8 93,8 61,8 Item No. 11008777 11008776 11008775 11008774 70,8 93,8 Process and Data Interfaces LED Signaling Interfaces of camera types: Camera Type 8P8C mod jack Standard PoE IP67 IO ■ □ □ ■ LEDs of camera types: 8P8C mod jack LED □ ■ □ □ M12 8 pins M8 3 pins M8 4 pins M8 8 pins □ □ ■ □ ■ □ ■ ■ ■ ■ ■ □ □ □ □ ■ 8P8C mod jack with LED M12 8 pins 6 1 8 1 (gn/wh) (gn) (og/wh) (bu) (bu/wh) (og) (bn/wh) (bn) MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 2 3 4 5 6 7 8 (gn/wh) (gn) (og/wh) (bu) (bu/wh) (og) (bn/wh) (bn) MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 4 3 1 1 2 3 4 5 6 7 8 5 7 8 5 7 8 MX33 MX4+ 2 MX4MX1MX2+ MX1+ MX3+ MX2- 4 2 LEDs 1 2 3 LEDs 1 2 3 3 M8 4 pins 2 1 1 M8 8 pins 6 4 (brown) Power VCC (blue) GND (black) NC 1 2 3 4 (brown) (white) (blue) (black) TrigIN+ TrigINFlashout Uext 5 4 7 3 3 1 4 1 3 4 3 LEDs □ ■ □ □ 1 3 2 2 1 Signal green yellow green green flash yellow yellow / red flash Meaning Power on Readout active Link active Receiving Transmitting Receiving and Transmitting Signal green yellow green green flash red Meaning Power on Readout active Link active Receiving Transmitting Installation Interfaces for Power Supply and Digital IOs M8 3 pins 2 LEDs ■ □ ■ ■ 2 8 (neg. / pos. Vport) 1 (wh) 6 (neg. / pos. Vport) 2 (bn) 7 1 (pos. / neg. Vport) 3 (gn) 4 (ye) 5 (gr) (pos. / neg. Vport) 6 (pk) 7 (bu) 8 (rd) For Standard Cameras: Camera Type Standard PoE IP I/O Gigabit Ethernet Interfaces 8P8C mod jack Mounting Adapters 1 2 3 4 5 6 7 8 (white) 6 (brown) (green)7 (yellow)1 (grey) (pink) (blue) (red) 7 8 2 Out 5 3 4 In 2 In 1 3 2 IO GND 8 IO Power VCC Out 1 Out 2 In 3 Installation of standard cameras: ▪▪ Connect the camera using an appropriate cable (at least Cat5e) to the GigE board on your PC (8P8C mod jack) open wire ▪▪ If required, connect a trigger and / or flash to the 4-pin M8 male connector ▪▪ Connect the camera to power supply Installation sample 1 - PCI board; 2 - GigE cable; 3 - Cable for trigger and flash; 4 - Power cable Installation of cameras with PoE: Power Supply Power VCC 8 V DC ... 30 V DC I 620 mA ... 120 mA Power consumption P approx. 3.5 ... 6 W ▪▪ Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a PoE capable ethernet switch ▪▪ Establish the connection between switch and GigE board on your PC ▪▪ If required, connect a trigger and / or flash to the 4-pin M8 male connector open wire Notice Further technical details available in the respective data sheets. Installation sample 1 - PCI board; 2 - GigE cable; 3 - PoE capable ethernet switch or Baumer PoE components; 4 - Cable for trigger and flash Name Item-No. Tripod mounting adapter 11003060 Front mounting adapter 11002638 For Cameras with IP67 housing: Name Item-No. IP mounting Adapter 11003947