MBR60L45CT D

MBR60L45CTG,
MBR60L45WTG
Switch‐mode
Power Rectifier
45 V, 60 A
www.onsemi.com
Features and Benefits
•
•
•
•
•
•
•
SCHOTTKY BARRIER
RECTIFIERS
60 AMPERES, 45 VOLTS
Low Forward Voltage
Low Power Loss/High Efficiency
High Surge Capacity
175°C Operating Junction Temperature
60 A Total (30 A Per Diode Leg)
Guard−Ring for Stress Protection
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
1
2, 4
3
MARKING
DIAGRAMS
4
Applications
• Power Supply − Output Rectification
• Power Management
• Instrumentation
TO−220
CASE 221A
STYLE 6
Mechanical Characteristics:
1
• Case: Epoxy, Molded
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight (Approximately): 1.9 Grams (TO−220)
2
AYWW
B60L45G
AKA
3
Weight (Approximately): 4.3 Grams (TO−247)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped 50 Units Per Plastic Tube for TO−220
and 30 Units Per Plastic Tube for TO−247
AYWWG
B60L45
AKA
1
2
TO−247
CASE 340AL
3
B60L45
A
Y
WW
AKA
G
= Device Code
= Assembly Location
= Year
= Work Week
= Polarity Designator
= Pb−Free Device
ORDERING INFORMATION
Device
© Semiconductor Components Industries, LLC, 2015
January, 2015 − Rev. 4
1
Package
Shipping
MBR60L45CTG
TO−220
(Pb−Free)
50 Units/Rail
MBR60L45WTG
TO−247
(Pb−Free)
30 Units/Rail
Publication Order Number:
MBR60L45CT/D
MBR60L45CTG, MBR60L45WTG
MAXIMUM RATINGS (Per Diode Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
45
V
Average Rectified Forward Current
(Rated VR) TC = 145°C for MBR60L45CTG
(Rated VR) TC = 165°C for MBR60L45WTG
IF(AV)
30
A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz)
IFRM
60
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM
200
A
Operating Junction Temperature (Note 1)
TJ
−65 to +175
°C
Storage Temperature
Tstg
−65 to +175
°C
Voltage Rate of Change (Rated VR)
dv/dt
10,000
V/ms
> 400
> 8000
V
ESD Ratings: Machine Model = C
Human Body Model = 3B
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
°C/W
Maximum Thermal Resistance
(MBR60L45CTG)
(MBR60L45WTG)
− Junction−to−Case
− Junction−to−Case
RqJC
RqJC
1.9
0.59
Symbol
Value
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Characteristic
Maximum Instantaneous Forward Voltage (Note 2)
(IF = 30 A, TC = 25°C)
(IF = 30 A, TC = 125°C)
(IF = 60 A, TC = 25°C)
(IF = 60 A, TC = 125°C)
vF
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, TC = 25°C)
(Rated DC Voltage, TC = 125°C)
iR
Unit
V
0.55
0.53
0.73
0.76
mA
1.2
275
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
www.onsemi.com
2
MBR60L45CTG, MBR60L45WTG
TYPICAL CHARACTERISTICS
1000
IF, INSTANTANEOUS FORWARD
CURRENT (A)
IF, INSTANTANEOUS FORWARD
CURRENT (A)
1000
100
100
150°C
25°C
10
125°C
1
0.1
150°C
125°C
1
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
0.2
0.6
0.8
1.0
1.2
1.4
VF, MAXIMUM FORWARD VOLTAGE (V)
Figure 1. Typical Forward Voltage
Figure 2. Maximum Forward Voltage
1.6
1E+00
IR, MAXIMUM REVERSE CURRENT (A)
IR, REVERSE CURRENT (A)
150°C
1E−01
150°C
1E−01
125°C
1E−02
125°C
1E−02
1E−03
1E−03
1E−04
25°C
1E−04
25°C
1E−05
1E−05
0
5
10
15
20
25
30
35
40
45
50
0
5
IF, AVERAGE FORWARD CURRENT (A)
dc
40
Square Wave
30
25
20
15
10
5
0
100 110
25
30
35
40
45
50
Figure 4. Maximum Reverse Current
50
80 90
20
VR, REVERSE VOLTAGE (V)
Figure 3. Typical Reverse Current
45
15
10
VR, REVERSE VOLTAGE (V)
IF, AVERAGE FORWARD CURRENT (A)
0.4
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
1E+00
35
25°C
10
120 130 140 150 160 170 180
50
45
dc
40
Square Wave
35
30
25
20
15
10
5
0
80 90
100 110
120 130 140 150 160 170 180
TC, CASE TEMPERATURE (°C)
TC, CASE TEMPERATURE (°C)
Figure 5. Current Derating for MBR60L45CTG
Figure 6. Current Derating for MBR60L45WTG
www.onsemi.com
3
MBR60L45CTG, MBR60L45WTG
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
10000
Square Wave
dc
25°C
1000
100
0
R(t) TRANSIENT THERMAL RESISTANCE
C, CAPACITANCE (pF)
PFO, AVERAGE POWER
DISSIPATION (W)
TYPICAL CHARACTERISTICS
5
10
15
20
25
30
35
0
40
5
10
15
20
25
35
30
Io, AVERAGE FORWARD CURRENT (A)
VR, REVERSE VOLTAGE (V)
Figure 7. Forward Power Dissipation
Figure 8. Capacitance
40
45
10
1
0.1
D = 0.5
0.2
0.1
0.05
0.01
0.01
P(pk)
t1
SINGLE PULSE
t2
DUTY CYCLE, D = t1/t2
0.001
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
T1, TIME (sec)
R(t) TRANSIENT THERMAL RESISTANCE
Figure 9. Thermal Response
Junction−to−Case for MBR60L45CTG
1
D = 0.5
0.2
0.1
0.1
0.05
0.01
P(pk)
0.01
t1
t2
SINGLE PULSE
DUTY CYCLE, D = t1/t2
0.001
0.000001
0.00001
0.0001
0.001
0.01
0.1
T1, TIME (sec)
Figure 10. Thermal Response
Junction−to−Case for MBR60L45WTG
www.onsemi.com
4
1
10
100
1000
MBR60L45CTG, MBR60L45WTG
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
−T−
B
SEATING
PLANE
C
F
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
INCHES
MIN
MAX
0.570
0.620
0.380
0.415
0.160
0.190
0.025
0.038
0.142
0.161
0.095
0.105
0.110
0.161
0.014
0.024
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
----0.080
N
STYLE 6:
PIN 1.
2.
3.
4.
www.onsemi.com
5
ANODE
CATHODE
ANODE
CATHODE
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.53
4.07
4.83
0.64
0.96
3.61
4.09
2.42
2.66
2.80
4.10
0.36
0.61
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
----2.04
MBR60L45CTG, MBR60L45WTG
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE A
B
A
NOTE 4
E
SEATING
PLANE
0.635
M
P
A
Q
E2
D
S
NOTE 3
1
2
4
DIM
A
A1
b
b2
b4
c
D
E
E2
e
L
L1
P
Q
S
3
L1
NOTE 5
L
2X
b2
c
b4
3X
e
A1
b
0.25
NOTE 7
M
B A
M
NOTE 6
E2/2
NOTE 4
B A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
M
MILLIMETERS
MIN
MAX
4.70
5.30
2.20
2.60
1.00
1.40
1.65
2.35
2.60
3.40
0.40
0.80
20.30
21.40
15.50
16.25
4.32
5.49
5.45 BSC
19.80
20.80
3.50
4.50
3.55
3.65
5.40
6.20
6.15 BSC
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR60L45CT/D