PD - 90677D IRH7150 100V, N-CHANNEL RADIATION HARDENED POWER MOSFET THRU-HOLE (T0-204) ® ™ RAD Hard HEXFET TECHNOLOGY Product Summary Part Number IRH7150 IRH3150 IRH4150 IRH8150 Radiation Level RDS(on) 100K Rads (Si) 0.065Ω 300K Rads (Si) 0.065Ω 600K Rads (Si) 0.065Ω ID 34A 34A 34A 1000K Rads (Si) 0.065Ω 34A International Rectifier’s RADHard HEXFET® technology provides high performance power MOSFETs for space applications. This technology has over a decade of proven performance and reliability in satellite applications. These devices have been characterized for both Total Dose and Single Event Effects (SEE). The combination of low Rdson and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. TO-204AE Features: n n n n n n n n n Single Event Effect (SEE) Hardened Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight Absolute Maximum Ratings Pre-Irradiation Parameter ID @ VGS = 12V, TC = 25°C ID @ VGS = 12V, TC = 100°C IDM PD @ TC = 25°C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current ➀ Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy ➁ Avalanche Current ➀ Repetitive Avalanche Energy ➀ Peak Diode Recovery dv/dt ➂ Operating Junction Storage Temperature Range Lead Temperature Weight Units 34 21 136 150 1.2 ±20 500 34 15 5.5 -55 to 150 A W W/°C V mJ A mJ V/ns o 300 ( 0.063 in.(1.6mm) from case for 10s) 11.5 (Typical ) C g For footnotes refer to the last page www.irf.com 1 03/21/01 IRH7150 Pre-Irradiation Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Min IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Typ Max Units 100 — — V — 0.13 — V/°C — — 2.0 8.0 — — — — — — — — 0.065 0.076 4.0 — 25 250 Ω — — — — — — — — — — — — — — — — — — — 10 100 -100 160 35 65 45 190 170 130 — Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (‘Miller’) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance Test Conditions VGS = 0V, ID = 1.0mA Reference to 25°C, ID = 1.0mA VGS = 12V, ID = 21A ➃ VGS = 12V, ID = 34A VDS = VGS, ID = 1.0mA VDS > 15V, IDS = 21A ➃ VDS= 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V VGS =12V, ID = 34A VDS = 50V V S( ) Ω Parameter BVDSS Drain-to-Source Breakdown Voltage ∆BV DSS/∆T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current µA nA nC VDD = 50V, ID = 34A VGS =12V, RG = 2.35Ω ns nH Measured from Drain lead (6mm /0.25in. from package) to Source lead (6mm /0.25in. from package) with Source wires internally bonded from Source Pin to Drain Pad Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance — — — 4300 1200 200 — — — VGS = 0V, VDS = -25V f = 1.0MHz pF Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units IS ISM VSD t rr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) ➀ Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge ton Forward Turn-On Time — — — — — — — — — — 34 136 1.4 570 5.8 Test Conditions A V nS µC Tj = 25°C, IS = 34A, VGS = 0V ➃ Tj = 25°C, IF = 34A, di/dt ≥ 100A/µs VDD ≤ 25V ➃ Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter R thJC RthJA RthCS Junction-to-Case Junction-to-Ambient Case-to-Sink Min Typ Max Units — — — — 0.83 — 30 0.12 — Test Conditions °C/W Typical socket mount Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page 2 www.irf.com Radiation Characteristics Pre-Irradiation IRH7150 International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ➄➅ Parameter BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD 100K Rads(Si)1 Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source ➃ On-State Resistance (TO-3) Static Drain-to-Source ➃ On-State Resistance (TO-204AA) Diode Forward Voltage ➃ 600 to 1000K Rads (Si)2 Test Conditions Units Min Max Min 200 2.0 — — — — — 4.0 100 -100 25 0.065 200 1.25 — — — — — 4.5 100 -100 50 0.09 nA µA Ω VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20 V VDS=80V, VGS =0V VGS = 12V, ID =21A — 0.065 — 0.09 Ω VGS = 12V, ID =21A — 1.4 1.4 V VGS = 0V, IS = 34A — Max V 1. Part number IRH7150 2. Part numbers IRH3150, IRH4150 and IRH8150 International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Single Event Effect Safe Operating Area Ion Cu Br LET MeV/(mg/cm2)) 28 36.8 Range VDS(V) (µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 43 100 100 100 80 60 39 100 90 70 50 — Energy (MeV) 285 305 120 100 VDS 80 Cu 60 Br 40 20 0 0 -5 -10 -15 -20 -25 VGS Fig a. Single Event Effect, Safe Operating Area For footnotes refer to the last page www.irf.com 3 IRH7150 Post-Irradiation Pre-Irradiation Fig 1. Typical Response of Gate Threshhold Fig 2. Typical Response of On-State Resistance Vs. Total Dose Exposure Voltage Vs. Total Dose Exposure Fig 3. Typical Response of Transconductance Vs. Total Dose Exposure 4 Fig 4. Typical Response of Drain to Source Breakdown Vs. Total Dose Exposure www.irf.com Post-Irradiation Pre-Irradiation IRH7150 Fig 5. Typical Zero Gate Voltage Drain Current Vs. Total Dose Exposure Fig 6. Typical On-State Resistance Vs. Neutron Fluence Level Fig 8a. Gate Stress of VGSS Equals 12 Volts During Radiation Fig 7. Typical Transient Response of Rad Hard HEXFET During 1x1012 Rad (Si)/Sec Exposure www.irf.com Fig 8b. VDSS Stress Equals 80% of BVDSS During Radiation Fig 9. High Dose Rate (Gamma Dot) Test Circuit 5 RadiationPost-Irradiation Characteristics Pre-Irradiation IRH7150 Note: Bias Conditions during radiation: VGS = 12 Vdc, VDS = 0 Vdc Fig 10. Typical Output Characteristics Pre-Irradiation Fig 11. Typical Output Characteristics Post-Irradiation 100K Rads (Si) Fig 12. Typical Output Characteristics Post-Irradiation 300K Rads (Si) Fig 13. Typical Output Characteristics Post-Irradiation 1 Mega Rads (Si) 6 www.irf.com Radiation Characteristics Pre-Irradiation IRH7150 Note: Bias Conditions during radiation: VGS = 0 Vdc, VDS = 160 Vdc Fig 14. Typical Output Characteristics Pre-Irradiation Fig 15. Typical Output Characteristics Post-Irradiation 100K Rads (Si) Fig 16. Typical Output Characteristics Post-Irradiation 300K Rads (Si) Fig 17. Typical Output Characteristics Post-Irradiation 1 Mega Rads (Si) www.irf.com 7 IRH7150 Fig 18. Typical Output Characteristics Fig 20. Typical Transfer Characteristics 8 Pre-Irradiation Fig 19. Typical Output Characteristics Fig 21. Normalized On-Resistance Vs. Temperature www.irf.com Pre-Irradiation IRH7150 Fig 22. Typical Capacitance Vs. Drain-to-Source Voltage Fig 23. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 24. Typical Source-Drain Diode Forward Voltage Fig 25. Maximum Safe Operating Area www.irf.com 9 IRH7150 Pre-Irradiation 35 VDS I D , Drain Current (A) 30 VGS RD D.U.T. RG 25 + -VDD 20 VGS Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % 15 Fig 27a. Switching Time Test Circuit 10 VDS 5 90% 0 25 50 75 100 125 150 TC , Case Temperature ( °C) 10% VGS Fig 26. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 27b. Switching Time Waveforms Fig 28. Maximum Effective Transient Thermal Impedance, Junction-to-Case 10 www.irf.com Pre-Irradiation IRH7150 1 5V L VD S D .U .T RG IA S VGS 20V D R IV E R + - VD D A 0 .0 1 Ω tp Fig 29a. Unclamped Inductive Test Circuit V (B R )D S S tp Fig 29c. Maximum Avalanche Energy Vs. Drain Current IAS Current Regulator Same Type as D.U.T. Fig 29b. Unclamped Inductive Waveforms 50KΩ QG 12V .2µF .3µF 12 V QGS QGD + V - DS VGS VG 3mA Charge Fig 30a. Basic Gate Charge Waveform www.irf.com D.U.T. IG ID Current Sampling Resistors Fig 30b. Gate Charge Test Circuit 11 IRH7150 Pre-Irradiation Foot Notes: ➀ Repetitive Rating; Pulse width limited by maximum junction temperature. ➁ VDD = 25V, starting TJ = 25°C, L=0.86mH Peak IL = 34A, VGS =12V ➂ ISD ≤ 34A, di/dt ≤ 140A/µs, VDD ≤ 100V, TJ ≤ 150°C ➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2% ➄ Total Dose Irradiation with VGS Bias. 12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. ➅ Total Dose Irradiation with VDS Bias. 80 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions — TO-204AE IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 03/01 12 www.irf.com