Previous Datasheet Index Next Data Sheet Bulletin I25156/B ST330S SERIES PHASE CONTROL THYRISTORS Stud Version Features 330A Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4 - 16UNF2A or ISO M24x1.5 Compression Bonded Encapsulation for heavy duty operations such as severe thermal cycling Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters ST330S Units 330 A 75 °C 520 A @ 50Hz 9000 A @ 60Hz 9420 A @ 50Hz 405 KA2s @ 60Hz 370 KA2s 400 to 1600 V 100 µs - 40 to 125 °C IT(AV) @ TC IT(RMS) ITSM I 2t V DRM /V RRM tq TJ typical To Order case style TO-209AE (TO-118) Previous Datasheet ST330S Series Index Next Data Sheet ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code ST330S V DRM /V RRM , max. repetitive peak and off-state voltage V VRSM , maximum nonrepetitive peak voltage V 04 400 500 08 800 900 12 1200 1300 14 1400 1500 16 1600 1700 I DRM /I RRM max. @ TJ = TJ max mA 50 On-state Conduction Parameter I T(AV) ST330S Units Conditions Max. average on-state current 330 A @ Case temperature 75 °C I T(RMS) Max. RMS on-state current 520 A I TSM Max. peak, one-cycle 9000 non-repetitive surge current 9420 I 2t Maximum I2t for fusing Maximum I2√t for fusing V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold Low level value of on-state t = 8.3ms reapplied 7570 t = 10ms 100% VRRM 7920 t = 8.3ms reapplied Sinusoidal half wave, 405 t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied 287 t = 10ms 100% VRRM 262 t = 8.3ms reapplied A KA2s 4050 KA2√s High level value of on-state slope resistance t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.91 V 0.92 (I > π x IT(AV)),TJ = TJ max. 0.58 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ2222222222222 = TJ max. slope resistance rt2 DC @ 62°C case temperature No voltage voltage rt1 180° conduction, half sine wave t = 10ms 370 I 2 √t 12 mΩ (I > π x IT(AV)),TJ = TJ max. 0.57 V TM Max. on-state voltage 1.51 IH Maximum holding current 600 IL Typical latching current 1000 V mA To Order Ipk= 1040A, TJ = TJ max, tp = 10ms sine pulse T J = 25°C, anode supply 12V resistive load Previous Datasheet ST330S Series Index Fig. 1 - Current Ratings Characteristics Next Data Sheet Fig. 2 - Current Ratings Characteristics Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics To Order Previous Datasheet Index Fig. 5 - Maximum Non-Repetitive Surge Current Next Data SheetSeries ST330S Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 7 - On-state Voltage Drop Characteristics Fig. 8 - Thermal Impedance Z thJC Characteristic To Order Previous Datasheet ST330S Series Index Fig. 9 - Gate Characteristics To Order Next Data Sheet Previous Datasheet Index Next Data Sheet ST330S Series Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current td Typical delay time ST330S 1000 Units Conditions A/µs 1.0 µs tq Typical turn-off time 100 Gate drive 20V, 20Ω, tr ≤ 1µs TJ = TJ max, anode voltage ≤ 80% VDRM Gate current A, di g /dt = 1A/µs Vd = 0.67% VDRM, TJ = 25°C ITM = 550A, TJ = TJ max, di/dt = 40A/µs, VR = 50V dv/dt = 20V/µs, Gate 0V 100Ω, tp = 500µs Blocking Parameter ST330S Units Conditions dv/dt Maximum critical rate of rise of off-state voltage 500 V /µs TJ = TJ max. linear to 80% rated VDRM IRRM IDRM Max. peak reverse and off-state leakage current 50 mA TJ = TJ max, rated V DRM/V RRM applied 23 Triggering Parameter PGM ST330S Maximum peak gate power 2.0 IGM Max. peak positive gate current 3.0 +VGM Maximum peak positive Maximum peak negative A TJ = TJ max, t p ≤ 5ms V TJ = TJ max, tp ≤ 5ms 5.0 gate voltage VGT TJ = TJ max, t p ≤ 5ms TJ = TJ max, f = 50Hz, d% = 50 20 gate voltage IGT W 10.0 PG(AV) Maximum average gate power -VGM Units Conditions TYP. MAX. DC gate current required 200 - to trigger 100 200 50 - TJ = 125°C DC gate voltage required 2.5 - TJ = - 40°C to trigger 1.8 3.0 1.1 - TJ = - 40°C mA V TJ = 25°C Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied TJ = 25°C TJ = 125°C IGD DC gate current not to trigger 10 mA VGD DC gate voltage not to trigger 0.25 V TJ = TJ max To Order Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Previous Datasheet ST330S Series Index Next Data Sheet Thermal and Mechanical Specification Parameter ST330S TJ Max. operating temperature range -40 to 125 Tstg Max. storage temperature range -40 to 150 RthJC Max. thermal resistance, DC operation K/W RthCS Max. thermal resistance, 0.03 case to heatsink Mounting torque, ± 10% Mounting surface, smooth, flat and greased 48.5 (425) wt °C 0.10 junction to case T Units Conditions Approximate weight Nm (lbf-in) Non lubricated threads 535 Case style g TO - 209AE (TO-118) See Outline Table ∆RthJC Conduction 12 (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Units 180° 0.011 0.008 120° 0.013 0.014 90° 0.017 0.018 60° 0.025 0.026 30° 0.041 0.041 Conditions TJ = TJ max. K/W Ordering Information Table Device Code ST 33 0 S 16 P 0 1 2 3 4 5 6 7 1 - Thyristor 2 - Essential part number 3 - 0 = Converter grade 4 - S = Compression bonding Stud 5 - Voltage code: Code x 100 = VRRM (See Voltage Rating Table) 6 - P = Stud base 16UNF threads 2222222222222 M = Stud base metric threads (M24 x 1.5) 7 - 0 = Eyelet terminals (Gate and Auxiliary Cathode Leads) 1 = Fast - on terminals (Gate and Auxiliary Cathode Leads) 3 = Threaded top terminal 3/8" 24UNF-2A 8 - Critical dv/dt: None = 500V/µsec (Standard selection) L 8 = 1000V/µsec (Special selection) To Order Previous Datasheet Index Next Data Sheet ST330S Series Outline Table CERAMIC HOUSING 22 (0.87) MAX. 4.5 (0.18) MAX. IN . 9 .5 (0 . 37 )M IN . 4.3 (0.17) DIA. )M WHITE GATE RED SILICON RUBBER 24 5 (9 .6 5) ± 1 0 (0 .3 9) FLEXIBLE LEAD RED CATHODE C.S. 50mm 2 (0.078 s.i.) Fast-on Terminals AMP. 280000-1 REF-250 47 (1.85) M AX. RED SHRINK 21 (0.82) M A X . 25 5 (1 0.04 ) WHITE SHRINK M AX . 2 7 .5 (1.08) 2 4 5 (9 .6 5) 38 (1.50) MAX. DIA. 22 (0. 86 10.5 (0.41) NOM. SW 45 23 3/4"16 UNF-2A Case Style TO-209AE (TO-118) 49 (1.92) MAX. All dimensions in millimeters (inches) * FOR METRIC DEVICE: M24 X 1.5 - LENGHT SCREW 21 (0.83) MAX. CERAMIC HOUSING 17 (0.67) DIA. 25 (0.9 8) 3/8"-24UNF-2A 80 .5 ( 3 .17 ) M A X. All dimensions in millimeters (inches) 27 .5 ( 1.08) SW 45 3/4"-16UNF-2A * * FOR METRIC DEVICE: M24 x 1.5 - LENGHT SCREW 21 (0.83) MAX. To Order M AX . 47 (1 .85) Case Style TO-209AE (TO-118) with top thread terminal 3/8" M AX . 21 ( 0.8 3) 77 .5 ( 3 .05 ) 38 (1.5) DIA. MAX.