Chroma amplifier transistor (300V, 0.1A) 2SC4061K / 2SC3415S / 2SC4015 Dimensions (Unit : mm) (2) (3) 0.4 (1) 2SC4061K 0.95 0.95 1.9 2.9 Features 1) High breakdown voltage. (BVCEO=300V) 2) Low collector output capacitance. (Typ. 3pF at VCB=30V) 3) Ideal for chroma circuit. 1.6 2.8 Emitter-base voltage Collector current VEBO IC 5 100 0.2 V mA PC 0.3 W Collector power dissipation 2SC4061K 2SC3415S 2SC4015 1 ∗ 150 Junction temperature Tj Storage temperature Tstg 0.3Min. ROHM : SMT3 EIAJ : SC-59 2SC3415S °C −55 to +150 0~0.1 V V 1.1 Each lead has same dimensions 4 2 3Min. Unit 300 300 (1) Emitter (2) Base (3) Collector 3 Limits VCBO VCEO Parameter (15Min.) Symbol Collector-base voltage Collector-emitter voltage 0.8 0.15 Absolute maximum ratings (Ta=25C) °C 0.45 ∗ Printed circuit board 1.7mm thick, collector plating 1cm2 or larger. 2.5 (1) Emitter (2) Collector (3) Base 0.5 0.45 5 ROHM : SPT EIAJ : SC-72 2SC4015 2.5 6.8 ∗ Denotes hFE 0.65Max. 0.5 4.4 ∗ 2SC4015 ATV NP − TV2 2500 0.9 2SC4061K 2SC3415S SPT SMT3 NP NP − AN TP T146 5000 3000 Taping specifications 1.0 Type Package hFE Marking Code Basic ordering unit (pieces) (1) (2) (3) 14.5 Packaging specifications and hFE (1) (2) (3) ROHM : ATV 2.54 2.54 1.05 0.45 (1) Emitter (2) Collector (3) Base Taping specifications Electrical characteristics (Ta=25C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Parameter BVCBO BVCEO − − − V V V Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage ICBO − 0.5 μA VCB=200V IEBO − − 0.5 2 μA V VEB=4V VCE(sat) DC current transfer ratio hFE 56 − − − − − − − IC=50μA IC=100μA BVEBO 300 300 5 Gain bandwidth product Collector output capacitance fT 50 100 − MHz Cob − 3 120 − − www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ pF 1/3 Conditions IE=50μA IC/IB=50mA/5mA VCE/IC=10V/10mA VCE=30V, IE=−10mA, f=30MHz VCB=30V, IE=0A, f=1MHz 2009.12 - Rev.B 2SC4061K / 2SC3415S / 2SC4015 Data Sheet Electrical characteristics curves 0.4mA 20 0 IB=0.2mA 0 2 4 6 8 0.6mA 40 0.4mA 20 0 10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) IB=0.2mA 0 8 12 16 10 5 2 1 0.5 200 20 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Ground emitter output characteristics ( Ι ) 500 4 20 500 400 600 800 1000 1200 1400 1600 BASE TO EMITTER VOLTAGE : VBE (mV) Fig.2 Ground emitter output characteristics ( ΙΙ ) Ta=25°C −25°C 40 60 50 Ta=10 0°C A 1.0m 0.8mA m 0.6 A A 1.0m 0.8mA VCE=10V 100 25°C 60 1.4mA 1.2mA 80 200 2.0mA 1.8mA 1.6mA COLLECTOR CURRENT : IC (mA) 80 100 Ta=25°C Ta=25°C 2.0mA 1.8mA 1.6mA 1.4mA 1.2mA COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) 100 Fig.3 Ground emitter propagation characteristics 2 VCE=10V Ta=25°C 200 VCE=10V 100 5V 50 20 Ta=100°C 200 100 DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE 1 25°C 50 −25°C 20 10 5 0.5 IC/IB=10 0.2 0.1 5 0.05 10 0.5 1 2 5 10 20 2 0.2 50 100 0.5 1 5 10 20 50 100 Fig.4 DC current gain vs. collector current ( Ι ) Fig.5 DC current gain vs. collector current ( ΙΙ ) 2 200 Ta=25°C IC/IB=10 1 Ta=−25°C 25°C VBE(sat) 0.5 100°C 0.2 0.1 Ta=100°C 25°C VCE(sat) −25°C 0.05 0.02 0.2 0.5 1 2 5 10 20 50 100 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage Base-emitter saturation voltage vs. collector current www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ 0.02 0.2 COLLECTOR CURRENT : IC (mA) TRANSITION FREQUWNCY : fT (MHZ) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SATURATION VOLTAGE : VBE(sat) (V) COLLECTOR CURRENT : IC (mA) 2 VCE=30 10V 50 20 10 −2 −5 −10 −20 −50 EMITTER CURRENT : IE (mA) Fig.8 Gain bandwidth product vs. emitter current 2/3 2 5 10 20 50 100 Fig.6 Collector-emitter saturation voltage vs. collector current 100 5 −1 0.5 1 COLLECTOR CURRENT : IC (mA) −100 COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 5 0.2 20 Ta=25°C f=1MHz 10 IE=0A 5 2 1 0.5 1 2 5 10 20 50 100 COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.9 Collector output capacitance vs. collector-base voltage 2009.12 - Rev.B Ta=25°C ∗single nonrepetitive pulse 500m IC Max (Pulse) 200m DC 100m Data Sheet s∗ m s∗ =1 0m Pw s∗ =1 m Pw 00 =1 s∗ Pw w=2 P COLLECTOR CURRENT : IC (A) 2SC4061K / 2SC3415S / 2SC4015 50m 20m 10m 5m 2m 1m 1 2 5 10 20 50 100 200 500 1000 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.10 Safe operating area www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ 3/3 2009.12 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A