SN74AHC1G86-Q1 SCLS723 – APRIL 2011 www.ti.com SINGLE 2-INPUT EXCLUSIVE-OR GATE Check for Samples: SN74AHC1G86-Q1 FEATURES 1 • • • • • • DBV PACKAGE (TOP VIEW) Qualified For Automotive Applications Operating Range of 2 V to 5.5 V Max tpd of 10ns at 5 V Low Power Consumption, 10-μA Max ICC ±8-mA Output Drive at 5 V Schmitt Trigger Action at All Inputs Makes the Circuit Tolerant for Slower Input Rise and Fall Time • DESCRIPTION The SN74AHC1G86-Q1 is a single 2-input exclusive-OR gate. The device performs the Boolean function Y = A ⊕ B or Y = AB + AB in positive logic. A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the output. ORDERING INFORMATION (1) PACKAGE (2) TA −40°C to 125°C (1) (2) SOT − DBV ORDERABLE PART NUMBER Reel of 3000 SN74AHC1G86QDBVRQ1 TOP-SIDE MARKING ACYU For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. FUNCTION TABLE INPUTS A B OUTPUT Y L L L L H H H L H H H L 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2011, Texas Instruments Incorporated SN74AHC1G86-Q1 SCLS723 – APRIL 2011 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. EXCLUSIVE-OR LOGIC An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols. These are five equivalent exclusive-OR symbols valid for an SN74AHC1G86 gate in positive logic; negation may be shown at any two ports. ABSOLUTE MAXIMUM RATINGS (1) MIN MAX VCC Supply voltage range –0.5 7 UNIT V VI Input voltage range (2) –0.5 7 V –0.5 VCC + 0.5 V VO Output voltage range applied in the high- or low-state (2) IIK Input clamp current VI < 0 V –20 V IOK Output clamp current VO < 0 V or VO > VCC ±20 mA IO Continuous output current VO = 0 V to VCC ±25 mA Continuous current through VCC or GND θJA Thermal impedance (3) Tstg Storage temperature range (1) (2) (3) 2 DBV package –40 ±50 mA 206 °C/W 125 °C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): SN74AHC1G86-Q1 SN74AHC1G86-Q1 SCLS723 – APRIL 2011 www.ti.com RECOMMENDED OPERATING CONDITIONS (1) VCC Supply voltage VIH High-level input voltage VCC = 2 V MIN MAX 2 5.5 2.1 V 3.85 VCC = 2 V Low-level input voltage V 1.5 VCC = 3 V VCC = 5.5 V VIL UNIT 0.5 VCC = 3 V 0.9 VCC = 5.5 V V 1.65 VI Input voltage 0 5.5 VO Output voltage 0 VCC V –50 μA VCC = 2 V IOH High-level output current IOL Low-level output current Δt/ΔV Input transition rise or fall rate TA Operating free-air temperature (1) VCC = 3.3 V ±0.3 V –4 VCC = 5 V ±0.5 V –8 VCC = 2 V 50 VCC = 3.3 V ±0.3 V 4 VCC = 5 V ±0.5 V 8 VCC = 3.3 V ±0.3 V V mA μA mA 100 VCC = 5 V ±0.5 V ns/V 20 –40 °C 125 All unused inputs of the device must be held at VCC or GND to ensure proper device operation. ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –50 μA VOH VCC TA = 25°C MAX MIN MAX MIN TYP 2V 1.9 2 1.9 3V 2.9 3 2.9 4.5 4.5 V 4.4 IOH = –4 mA 3V 2.58 2.48 IOH = –8 mA 4.5 V 3.94 3.8 IOL = 50 μA VOL IOL = 4 mA IOL = 8 mA II VI = 5.5 V or GND ICC VI = VCC or GND, CI VI = VCC or GND IO = 0 A 4.4 UNIT V 2V 0.1 0.1 3V 0.1 0.1 4.5 V 0.1 0.1 3V 0.36 0.44 4.5 V 0.36 0.44 0 V to 5.5 V ±0.1 ±1 μA 1 10 μA 10 10 pF 5.5 V 5V 4 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): SN74AHC1G86-Q1 V 3 SN74AHC1G86-Q1 SCLS723 – APRIL 2011 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ±0.3 V, TA = –40°C to 125°C, see Figure 1 PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A or B Y CL = 50 pF TA = 25°C MIN MIN MAX 14.5 1 16.5 14.5 1 16.5 TYP MAX 9.5 9.5 UNIT ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V ±0.5 V, TA = –40°C to 125°C, see Figure 1 PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A or B Y CL = 50 pF TA = 25°C MIN MIN MAX 8.8 1 10 8.8 1 10 TYP MAX 6.3 6.3 UNIT ns OPERATING CHARACTERISTICS VCC = 5 V, TA = 25°C PARAMETER Cpd 4 Power dissipation capacitance TEST CONDITIONS No load, f = 1 MHz Submit Documentation Feedback TYP 18 UNIT pF Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): SN74AHC1G86-Q1 SN74AHC1G86-Q1 SCLS723 – APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION Figure 1. Load Circuit and Voltage Waveforms Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): SN74AHC1G86-Q1 5 PACKAGE OPTION ADDENDUM www.ti.com 8-Apr-2011 PACKAGING INFORMATION Orderable Device SN74AHC1G86QDBVRQ1 Status (1) ACTIVE Package Type Package Drawing SOT-23 DBV Pins Package Qty 5 3000 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74AHC1G86-Q1 : • Catalog: SN74AHC1G86 • Enhanced Product: SN74AHC1G86-EP NOTE: Qualified Version Definitions: Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 8-Apr-2011 • Catalog - TI's standard catalog product • Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 7-Apr-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74AHC1G86QDBVRQ 1 Package Package Pins Type Drawing SPQ SOT-23 3000 DBV 5 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 179.0 8.4 Pack Materials-Page 1 3.2 B0 (mm) K0 (mm) P1 (mm) 3.2 1.4 4.0 W Pin1 (mm) Quadrant 8.0 Q3 PACKAGE MATERIALS INFORMATION www.ti.com 7-Apr-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC1G86QDBVRQ1 SOT-23 DBV 5 3000 203.0 203.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated