TOSHIBA SSM6J53FE

SSM6J53FE
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type
SSM6J53FE
○ High-Speed Switching Applications
○ Power Management Switch Applications
: Ron = 364 mΩ (max) (@VGS = -1.5 V)
1
6
2
5
3
4
Absolute Maximum Ratings (Ta = 25°C)
Rating
Drain-Source voltage
VDS
-20
V
Gate-Source voltage
VGSS
±8
V
DC
ID
-1.8
Pulse
IDP
-3.6
Drain current
Drain power dissipation
PD (Note 1)
Unit
A
500
mW
Channel temperature
Tch
150
°C
Storage temperature range
Tstg
−55~150
°C
0.12±0.05
Symbol
0.55±0.05
Characteristics
0.2±0.05
: Ron = 204 mΩ (max) (@VGS = -1.8 V)
0.5
Low on-resistance : Ron = 136 mΩ (max) (@VGS = -2.5 V)
0.5
•
1.2±0.05
1.0±0.05
1.5 V drive
Suitable for high-density mounting due to compact package
1.6±0.05
1.6±0.05
•
•
Unit : mm
1,2,5,6 :Drain
3 :Gate
4 :Source
Note:
Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: Mounted on an FR4 board.
2
(25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 645 mm )
ES6
JEDEC
⎯
JEITA
⎯
TOSHIBA
2-2N1A
Weight: 7.0 mg (typ.)
Electrical Characteristics (Ta = 25°C)
Characteristics
Drain-Source breakdown voltage
Symbol
Test Condition
Min
Typ.
Max
V (BR) DSS
ID = −1 mA, VGS = 0
−20
⎯
⎯
V (BR) DSX
ID = −1 mA, VGS = +8 V
−12
⎯
⎯
Unit
V
Drain cut-off current
IDSS
VDS = −20 V, VGS = 0
⎯
⎯
−10
μA
Gate leakage current
IGSS
VGS = ± 8 V, VDS = 0
⎯
⎯
±1
μA
Gate threshold voltage
Vth
VDS = −3 V, ID = −1 mA
−0.3
⎯
−1.0
V
Forward transfer admittance
|Yfs|
VDS = −3 V, ID = −0.9 A
(Note 2)
2.7
5.4
⎯
S
ID = −1.0 A, VGS = −2.5 V
(Note 2)
⎯
95
136
Drain-Source on-resistance
RDS (ON)
ID = −1.0 A, VGS = −1.8 V
(Note 2)
⎯
122
204
ID = −0.1 A, VGS = −1.5 V
(Note 2)
⎯
137
364
⎯
568
⎯
⎯
75
⎯
⎯
67
⎯
Input capacitance
Ciss
Output capacitance
Coss
Reverse transfer capacitance
Crss
Switching time
VDS = −10 V, VGS = 0
f = 1 MHz
Turn-on time
ton
VDD = −10 V, ID = −0.9 A
⎯
29
⎯
Turn-off time
toff
VGS = 0 ~ −2.5 V, RG = 4.7 Ω
⎯
39
⎯
⎯
10.6
⎯
⎯
7.4
⎯
⎯
3.3
⎯
⎯
0.8
1.2
Total gate charge
Qg
Gate-Source charge
Qgs
Gate-Drain charge
Qgd
Drain-Source forward voltage
VDSF
VDS = −16 V, IDS = -1.8 A,
VGS = − 4 V
ID = 1.8 A, VGS = 0
(Note 2)
mΩ
pF
ns
nC
V
Note 2: Pulse test
1
2007-11-01
SSM6J53FE
Switching Time Test Circuit
(a) Test Circuit
(b) VIN
0V
10%
OUT
0
IN
90%
−2.5 V
RG
−2.5V
10 μs
RL
VDD
VDS (ON)
(c) VOUT
VDD = -10 V
RG = 4.7 Ω
D.U. <
= 1%
VIN: tr, tf < 5 ns
Common Source
Ta = 25°C
Marking
6
90%
10%
VDD
tr
ton
tf
toff
Equivalent Circuit (top view)
5
4
6
5
4
3
1
2
3
KG
1
2
Precaution
Vth can be expressed as the voltage between the gate and source when the low operating current value is ID = -1mA
for this product. For normal switching operation, VGS (on) requires a higher voltage than Vth and VGS (off) requires a
lower voltage than Vth. (The relationship can be established as follows: VGS (off) < Vth < VGS (on).)
Be sure to take this into consideration when using the device.
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), ensure that the environment is
protected against static electricity. Operators should wear anti-static clothing, and containers and other objects that come
into direct contact with devices should be made of anti-static materials.
2
2007-11-01
SSM6J53FE
ID – VDS
-4
ID – VGS
-10000
-4 V
Common Source
VDS = -3 V
-1.5 V
-3.5
(mA)
-1.8 V
-2
-1.5
VGS = -1.2 V
-1
Ta = 85 °C
-10
25 °C
-1
−25 °C
-0.1
-0.5
0
-100
ID
-2.5 V
Drain current
(A)
-2.5
Drain current
ID
-1000
-3
Common Source
Ta = 25°C
0
-0.5
-1
-1.5
Drain - Source voltage
VDS
-0.01
0
-2
-0.2
(V)
-0.4
-1.2
ID = -0.1 A
Drain – Source on-resistance
RDS (ON) (mΩ)
200
25 °C
Ta = 85 °C
100
ID = -1.0 A
Common Source
300
200
25 °C
Ta = 85 °C
100
−25 °C
0
-4
-2
-6
Gate - Source voltage
−25 °C
0
-8
0
VGS (V)
-2
RDS (ON) – ID
-6
-8
VGS (V)
RDS (ON) – Ta
500
Common Source
400
Common Source
Ta = 25 °C
Drain – Source on-resistance
RDS (ON) (mΩ)
Drain – Source on-resistance
RDS (ON) (mΩ)
-4
Gate - Source voltage
450
350
300
250
VGS = -1.5 V
200
-1.8 V
150
100
-2.5 V
50
0
-1.6
RDS (ON) – VGS
300
0
-1.4
VGS (V)
400
Common Source
Drain – Source on-resistance
RDS (ON) (mΩ)
-1.0
Gate - Source voltage
RDS (ON) – VGS
400
-0.8
-0.6
0
-1
-3
-2
Drain current
ID
400
-1.0 A / -1.8 V
200
100
-1.0 A / -2.5 V
0
−50
-4
(A)
ID = -0.1 A / VGS = -1.5 V
300
0
50
Ambient temperature
3
100
Ta
150
(°C)
2007-11-01
SSM6J53FE
Vth (V)
Gate threshold voltage
Common Source
-0.7
-0.5
VDS = -3 V
ID = -1 mA
10
Forward transfer admittance
-0.6
(S)
|Yfs| – ID
30
⎪Yfs⎪
Vth – Ta
-0.8
-0.4
-0.3
-0.2
-0.1
0
−25
0
25
50
75
100
Ambient temperature
Ta
125
150
0.3
0.1
0.03
0.01
1
-100
-10
-1000
ID
-10000
(mA)
Dynamic Input Characteristic
(V)
VGS
Ciss
Gate-Source voltage
(pF)
C
Capacitance
10
-0.1
1
-10
100
30
3
Drain current
300
50
Ta = 25 °C
(°C)
3000
500
VDS = -3 V
C – VDS
5000
1000
Common Source
Coss
Common
Crss
Source
Ta = 25 °C
f = 1 MHz
VGS = 0 V
-1
-10
Drain – Source voltage
-8
-7
VDD = -16 V
-6
-5
-4
-3
-2
Common Source
ID = -1.8 A
Ta = 25 °C
-1
0
-100
VDS
-9
0
5
10
15
Total gate charge
(V)
20
Qg
25
(nC)
t – ID
IDR – VDS
1000
-2
Switching time
ton
10
Common Source
VDD = -10 V
VGS = 0 ∼ -2.5 V
Ta = 25 °C
RG = 4.7 Ω
tr
1
0.01
Common Source
VGS = 0 V
(A)
IDR
tf
0.1
Drain current
1
ID
Drain reverse current
100
t
(ns)
toff
IDR
G
S
-1
-0.5
0
10
D
Ta = 25 °C
-1.5
0
0.2
0.4
0.6
Drain-Source voltage
(A)
4
0.8
VDS
1
1.2
(V)
2007-11-01
SSM6J53FE
Transient thermal impedance
rth (°C /W)
rth – tw
1000
Single Pulse
Mounted on FR4 board
2
(25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 645 mm )
100
10
1
0.001
0.01
0.1
1
Pulse width
10
tw
100
1000
(s)
Safe operating area
-10
PD – Ta
ID max (Pulsed) *
600
1 ms*
-3
(mW)
ID max (Continuous)
10 ms*
PD
-0.4
10s*
Drain power dissipation
Drain current
ID
(A)
-1
DC operation
Ta = 25°C
-0.1
-0.03
Mounted on FR4 board
(25.4 mm × 25.4 mm × 1.6 t
2
Cu pad: 645 mm )
-0.01
* Single Non-repetitive Pulse
Curves
must
be
linearly
with
increase
temperature.
-0.001
-0.1
-0.3
-1
(25.4 mm × 25.4 mm × 1.6 t,
2
Cu Pad: 645 mm )
400
300
200
100
0
0
Ta = 25°C
-0.003
Mounted on FR4 board
500
50
Ambient temperature
derated
100
Ta
150
(°C)
in
-3
Drain-Source voltage
-10
VDS
-30
-100
(V)
5
2007-11-01
SSM6J53FE
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6
2007-11-01