MITSUBISHI MGFS45V2527A

< L/S band internally matched power GaAs FET >
MGFS45V2527A
2.5 – 2.7 GHz BAND / 32W
OUTLINE DRAWING
DESCRIPTION
The MGFS45V2527A is an internally impedance-matched
GaAs power FET especially designed for use in 2.5 - 2.7
GHz band amplifiers. The hermetically sealed metal-ceramic
package guarantees high reliability.
2.0MIN.
(0.079MIN.)
24.0± 0.3(0.945±0.012)
APPLICATION
2
3
QUALITY
 IG
1.4
(0.055)
RECOMMENDED BIAS CONDITIONS
 VDS=10V  ID=6.5A  RG=25ohm
Absolute maximum ratings
GATE
2
SOURCE(FLANGE)
3
DRAIN
(Ta=25C)
Ratings
Unit
Gate to drain breakdown voltage
-15
V
VGSO
Gate to source breakdown voltage
-15
V
ID
Drain current
22
A
IGR
Reverse gate current
-61
mA
IGF
Forward gate current
76
mA
PT *1
Total power dissipation
88
W
Tch
Cannel temperature
175
C
Tstg
Storage temperature
-65 to +175
C
Keep Safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum
effort into making semiconductor products better
and more reliable , but there is always the
possibility that trouble may occur with them.
Trouble with semiconductors may lead to personal
injury , fire or property damage. Remember to give
due consideration to safety when making your
circuit designs , with appropriate measure such
as (I) placement of substitutive , auxiliary circuits ,
(ii) use of non-flammable material or (iii) prevention
against any malfunction or mishap.
*1 : Tc=25C
Symbol
1
GF-51
Parameter
Electrical characteristics
0.1±0.05
3.65±0.4
(0.144±0.016)
15.8(0.622)
2.4±0.2
(0.094±0.008)
20.4± 0.2(0.803± 0.008)
 item 01 : 2.5 - 2.7 GHz band power amplifier
 item 51 : 2.5 - 2.7 GHz band digital radio communication
VGDO
0.6± 0.15
(0.024± 0.006)
2.0MIN.
(0.079MIN.)
17.4±0.2
(0.685±0.008)
Class A operation
Internally matched to 50(ohm) system
 High output power
P1dB=32W (TYP.) @f=2.5 - 2.7GHz
 High power gain
GLP=12.0dB (TYP.) @f=2.5 - 2.7GHz
 High power added efficiency
P.A.E.=45% (TYP.) @f=2.5 - 2.7GHz
 Low distortion [item -51]
IM3=-45dBc (TYP.) @Po=34.5dBm S.C.L
1
8.0±0.2
(0.315±0.008)
FEATURES
Symbol
Unit : millimeters (inches)
(Ta=25C)
Parameter
Test conditions
Limits
Min.
Unit
Typ.
Max.
VGS(off)
P1dB
Gate to source cut-off voltage
VDS=3V,ID=60mA
-
-
-5
V
Output power at 1dB gain compression
VDS=10V,ID(RF off)=6.5A
44
45
-
dBm
GLP
Linear Power Gain
f=2.5 - 2.7GHz
11
12
-
dB
ID
Drain current
-
7.5
-
A
P.A.E.
Power added efficiency
-
45
-
%
IM3 *2
3rd order IM distortion
-42
-45
-
dBc
Rth(ch-c) *3
Thermal resistance
-
-
1.5
C/W
delta Vf method
*2 :item -51 ,2 tone test,Po=34.5dBm Single Carrier Level ,f=2.5,2.6,2.7GHz,delta f=5MHz
*3 :Channel-case
Publication Date : Apr., 2011
1
< L/S band internally matched power GaAs FET >
MGFS45V2527A
2.5 – 2.7 GHz BAND /32W
MGFS45V2527A TYPICAL CHARACTERISTICS
Po , P.A.E. vs. Pin
P1dB,GLP vs. f
16
70
VDS=10(V)
IDS=6.5(A)
44
14
GLP
43
13
42
12
2.5
2.55
2.6
2.65
FREQ UENCY f (GHz)
OUTPUTPOWERPout (dBm)
15
LINEARPOWERGAINGLP(dB)
OUTPUTPOWERP1dB(dBm)
45
41
2.45
VDS=10 (V)
IDS=6.5(A)
f=2.6 (GHz)
45
P1dB
40
50
35
40
P.A.E.
30
30
25
20
20
10
15
11
2.75
2.7
60
Pout
15
20
25
30
35
INPUT POWER (dBm)
Po,IM3 vs. Pin
42
10
Po
38
0
36
-10
34
-20
IM3
32
-30
30
-40
28
-50
26
-60
24
IM3(dBc)
OUTPUTPOWERPo(dBmS.C.L.)
40
20
VDS=10(V)
IDS=6.5(A)
f1=2.700(GHz)
f2=2.705(GHz)
-70
14
16
18
20
22
24
26
28
30
INPUT POWER Pin (dBm S.C.L.)
32
34
MGFS45V2527A S-parameters ( Ta=25deg.C , VDS=10(V),IDS=6.5(A) )
f
(GHz)
2.40
2.42
2.44
2.46
2.48
2.50
2.52
2.54
2.56
2.58
2.60
2.62
2.64
2.66
2.68
2.70
2.72
2.74
2.76
2.78
2.80
S11
Magn.
Angle(deg)
0.34
-172
0.35
-176
0.37
177
0.40
170
0.41
163
0.43
157
0.43
151
0.44
145
0.45
139
0.45
134
0.45
128
0.45
122
0.44
116
0.44
110
0.43
103
0.42
96
0.40
88
0.39
80
0.37
71
0.36
61
0.34
50
S-Parameter (TYP.)
S21
S12
Magn.
Angle(deg)
Magn.
Angle(deg)
4.68
75
0.03
40
4.65
70
0.03
34
4.63
64
0.03
26
4.60
58
0.03
19
4.56
52
0.03
14
4.53
46
0.03
5
4.51
40
0.03
-1
4.49
34
0.04
-9
4.47
28
0.03
-15
4.44
22
0.04
-22
4.43
16
0.04
-29
4.42
10
0.04
-37
4.41
4
0.04
-42
4.40
-2
0.04
-50
4.40
-8
0.04
-55
4.39
-14
0.04
-62
4.37
-21
0.04
-70
4.37
-27
0.04
-74
4.35
-34
0.04
-79
4.34
-40
0.04
-88
4.32
-47
0.04
-95
Publication Date : Apr., 2011
2
Magn.
0.26
0.26
0.24
0.24
0.22
0.21
0.20
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.18
0.18
0.17
0.17
0.16
0.16
S22
Angle(deg)
-48
-53
-57
-65
-69
-79
-81
-86
-91
-97
-104
-108
-113
-117
-120
-126
-128
-133
-136
-138
-141
0
POW
ERADDEDEFFICIENCYP.A.E. (%)
46
50
< L/S band internally matched power GaAs FET >
MGFS45V2527A
2.5 – 2.7 GHz BAND /32W
Keep safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors
may lead to personal injury, fire or property damage. Remember to give due consideration to safety when
making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
•These materials are intended as a reference to assist our customers in the selection of the Mitsubishi
semiconductor product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
•Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any
third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
•All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are subject
to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It
is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized
Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product
listed herein.
The information described here may contain technical inaccuracies or typographical errors. Mitsubishi
Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means,
including the Mitsubishi Semiconductor home page (http://www.MitsubishiElectric.com/).
•When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, please be sure to evaluate all information as a total system before making
a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
•Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or systems
for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
•The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or
in part these materials.
•If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other than
the approved destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of
destination is prohibited.
•Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor
for further details on these materials or the products contained therein.
© 2011 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Publication Date : Apr., 2011
3