TSV632, TSV633, TSV634, TSV635 Rail-to-rail input/output 60 µA 880 kHz operational amplifiers Features ■ Rail-to-rail input and output ■ Low power consumption: 60 µA typ at 5 V ■ Low supply voltage: 1.5 V - 5.5 V ■ Gain bandwidth product: 880 kHz typ ■ Unity gain stability ■ Low power shutdown mode: 5 nA typ ■ Low offset voltage: 800 µV max (A version) ■ Low input bias current: 1 pA typ ■ EMI hardened op-amps ■ High tolerance to ESD: 4 kV HBM ■ Extended temperature range: -40° C to +125° C SOT23-8 SO-8 MiniSO-8 Applications ■ Battery-powered applications ■ Portable devices ■ Signal conditioning ■ Active filtering ■ Medical instrumentation TSSOP-14 Description The TSV63x series of dual and quad operational amplifiers offers low voltage operation and rail-torail input and output. TSSOP-16 This family features an excellent speed/power consumption ratio, offering a 880 kHz gainbandwidth product while consuming only 60 µA at 5 V supply voltage. The devices also feature an ultra-low input bias current and have a shutdown mode (TSV633, TSV635). These features make the TSV63x family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. June 2009 Doc ID 15688 Rev 2 1/26 www.st.com 26 Contents TSV63x Contents 1 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 4.1 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.2 Rail-to-rail input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.3 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.4 Shutdown function (TSV633 - TSV635) . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.5 Optimization of DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.6 Driving resistive and capacitive loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.7 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.8 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.1 SOT23-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.2 SO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5.3 MiniSO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.4 MiniSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5.5 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5.6 TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 2/26 Doc ID 15688 Rev 2 TSV63x 1 Package pin connections Package pin connections Figure 1. Pin connections for each package (top view) Out1 1 In1In1+ 2 _ 3 + 4 VCC- Out1 1 8 VCC+ In1- 2 _ In1+ 3 + VCC- 4 SHDN1 5 7 Out2 _ 6 In2- + 5 In2+ TSV632IDT/IST/ILT SO8/Mini-SO8/SOT23-8 1 In1- 2 _ _ 13 In4- In1+ 3 + + 12 In4+ VCC+ 4 11 VCC- In2+ 5 10 In3+ In2- 6 Out2 7 + _ 9 In3- 8 Out3 9 Out2 _ 8 In2- + 7 In2+ 6 SHDN2 TSV633IST MiniSO-10 16 Out4 Out1 1 In1- 2 _ _ 15 In4- In1+ 3 + + 14 In4+ VCC+ 4 In2+ 5 In2- 6 Out2 7 10 Out3 SHDN1/2 8 9 14 Out4 Out1 + _ 10 VCC+ TSV634IPT TSSOP14 13 VCC+ _ + _ 12 In3+ 11 In3- SHDN3/4 TSV635IPT TSSOP16 Doc ID 15688 Rev 2 3/26 Absolute maximum ratings and operating conditions 2 TSV63x Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings (AMR) Symbol VCC Vid Vin Iin SHDN Tstg Parameter Supply voltage (1) Differential input voltage Input voltage (3) Input current (4) Shutdown voltage (2) (3) Storage temperature Rthja Tj Maximum junction temperature ESD MM: machine model(7) model(8) CDM: charged device Unit 6 V ±VCC V VCC- - 0.2 to VCC++ 0.2 V 10 mA VCC- - 0.2 to VCC++ 0.2 V -65 to +150 °C ambient(5)(6) Thermal resistance junction to SOT23-8 MiniSO-8 SO-8 MiniSO-10 TSSOP14 TSSOP16 HBM: human body Value model(9) Latch-up immunity 105 190 125 113 100 95 °C/W 150 °C 4 kV 300 V 1.5 kV 200 mA 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6 V, Vin must not exceed 6V. 4. Input current must be limited by a resistor in series with the inputs. 5. Short-circuits can cause excessive heating and destructive dissipation. 6. Rth are typical values. 7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. Table 2. Operating conditions Symbol 4/26 Parameter VCC Supply voltage Vicm Common mode input voltage range Toper Operating free air temperature range Doc ID 15688 Rev 2 Value Unit 1.5 to 5.5 V VCC- - 0.1 to VCC+ + 0.1 V -40 to +125 °C TSV63x Electrical characteristics 3 Electrical characteristics Table 3. Electrical characteristics at VCC+ = +1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit TSV63x TSV63xA TSV633AIST - MiniSO10 3 0.8 1 mV Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.2 mV DC performance Vio DVio Iio Iib CMR Offset voltage Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (ΔVic/ΔVio) Tmin < Top < Tmax Tmin < Top < Tmax 0 V to 1.8 V, Vout = 0.9 V 53 Tmin < Top < Tmax 51 RL= 10 kΩ, Vout = 0.5 V to 1.3 V 85 Tmin < Top < Tmax 80 35 50 Avd Large signal voltage gain VOH High level output voltage RL = 10 kΩ Tmin < Top < Tmax VOL Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Isink Iout Isource ICC Supply current (per operator) μV/°C 2 1 10 (1) pA 1 100 pA 1 10 (1) pA 1 100 pA 74 dB 95 6 Tmin < Top < Tmax 4 Vo = 0 V 6 Tmin < Top < Tmax 4 No load, Vout = VCC/2 40 dB dB 5 4 Vo = 1.8 V dB mV 35 50 mV 12 mA 10 mA 50 Tmin < Top < Tmax 60 µA 62 µA AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz φm Phase margin Gm 700 790 kHz RL = 2 kΩ, CL = 100 pF 45 Degrees Gain margin RL = 2 kΩ, CL = 100 pF 13 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1 0.27 V/μs en Equivalent input noise voltage f = 1 kHz f = 10 kHz 60 33 nV -----------Hz 0.2 1. Guaranteed by design. Doc ID 15688 Rev 2 5/26 Electrical characteristics Table 4. TSV63x Shutdown characteristics VCC = 1.8 V Symbol Parameter Conditions Min. Typ. Max. Unit 2.5 50 nA Tmin < Top < 85° C 200 nA Tmin < Top < 125° C 1.5 µA DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) ton Amplifier turn-on time RL= 2 kΩ, Vout = VCC- to VCC-+0.2 V 200 ns toff Amplifier turn-off time RL = 2 kΩ, Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 20 ns VIH SHDN logic high VIL SHDN logic low IIH SHDN current high SHDN = VCC+ 10 pA IIL SHDN current low SHDN = VCC- 10 pA 50 pA 1 nA IOLeak 6/26 1.35 V 0.6 Output leakage in shutdown SHDN = VCCmode Tmin < Top < 125° C Doc ID 15688 Rev 2 V TSV63x Table 5. Electrical characteristics VCC+ = +3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit TSV63x TSV63xA TSV633AIST - MiniSO10 3 0.8 1 mV Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.2 mV DC performance Vio DVio Iio Iib CMR Offset voltage Input offset voltage drift 1 10(1) pA 1 100 pA 1 10(1) pA 1 100 pA Input offset current Tmin < Top < Tmax Input bias current Tmin < Top < Tmax Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 3.3 V, Vout = 1.65 V 57 Tmin < Top < Tmax 53 RL = 10 kΩ, Vout = 0.5 V to 2.8 V 88 Tmin < Top < Tmax 83 35 50 Avd Large signal voltage gain VOH High level output voltage RL = 10 kΩ Tmi. < Top < Tmax VOL Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Isink Iout Isource ICC μV/°C 2 Supply current (per operator) 79 dB 98 dB 5 4 Vo = 3.3 V 23 Tmin < Top < Tmax 20 Vo = 0 V 23 Tmin < Top < Tmax 20 No load, Vout = 1.75 V 43 mV 35 50 mV 45 mA 38 mA 55 Tmin < Top < Tmax 64 µA 66 µA AC performance Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz φm Phase margin Gm SR GBP 710 860 kHz RL = 2 kΩ, CL = 100 pF 46 Degrees Gain margin RL = 2 kΩ, CL = 100 pF 13 dB Slew rate RL = 2 kΩ, CL = 100 pF, AV = 1 0.29 V/μs 0.22 1. Guaranteed by design. Doc ID 15688 Rev 2 7/26 Electrical characteristics Table 6. TSV63x Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit TSV63x TSV63xA TSV633AIST - MiniSO10 3 0.8 1 mV Tmin < Top < Tmax - TSV63x Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 4.5 2 2.2 mV DC performance Vio DVio Iio Iib CMR SVR Avd EMIRR Offset voltages Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Tmin < Top < Tmax Tmin < Top < Tmax Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 5 V, Vout = 2.5 V 60 Tmin < Top < Tmax 55 Supply voltage rejection ratio 20 log (ΔVCC/ΔVio) VCC = 1.8 to 5 V 75 Tmin < Top < Tmax 73 RL= 10 kΩ, Vout = 0.5 V to 4.5 V 89 Tmin < Top < Tmax 84 Large signal voltage gain EMI Rejection Ratio 10 pA 1 100 pA 1 10(1) pA 1 100 pA 80 102 dB 98 VRF = 100 mVrms, f = 900 MHz 85 dB 92 VRF = 100 mVrms, f =2400 MHz 83 RL = 10 kΩ Tmin < Top < Tmax VOL Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Iout Isource Supply current (per operator) dB dB 61 High level output voltage dB dB VRF = 100 mVrms, f = 400 MHz VOH ICC 1 (1) EMIRR = -20 log (VRFpeak/ΔVio) V = 100 mV RF rms, f =1800 MHz Isink μV/°C 2 35 50 7 6 Vo = 5 V 40 Tmin < Top < Tmax 35 Vo = 0 V 40 Tmin < Top < Tmax 35 No load, Vout=VCC/2 50 mV 35 50 mV 69 mA 74 60 Tmin < Top < Tmax mA 69 µA 72 µA AC performance GBP Fu 8/26 Gain bandwidth product RL= 2 kΩ, CL = 100 pF, f = 100 kHz Unity gain frequency RL = 2 kΩ, CL = 100 pF, Doc ID 15688 Rev 2 730 880 kHz 830 kHz TSV63x Table 6. Electrical characteristics Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) (continued) Symbol Parameter Conditions Min. Typ. Max. Unit φm Phase margin RL = 2 kΩ, CL = 100 pF 48 Degrees Gm Gain margin RL = 2 kΩ, CL = 100 pF 13 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av=1 0.34 V/μs en Equivalent input noise voltage f = 1 kHz f = 10 kHz 60 33 nV -----------Hz Total harmonic distortion + noise VCC = 5V, f = 1kHz, AV = 1, RL = 100kΩ, Vicm = VCC/2, Vout = 2VPP 0.002 % THD+en 0.25 1. Guaranteed by design. Table 7. Shutdown characteristics at VCC = 5 V Symbol Parameter Conditions Min. Typ. Max. Unit 5 50 nA Tmin < Top < 85° C 200 nA Tmin < Top < 125° C 1.5 µA DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) ton Amplifier turn-on time RL = 2 kΩ, Vout = VCC- V to VCC-+0.2 V 200 ns toff Amplifier turn-off time RL = 2 kΩ, Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 20 ns VIH SHDN logic high VIL SHDN logic low IIH SHDN current high SHDN = VCC+ 10 pA IIL SHDN current low SHDN = VCC- 10 pA 50 pA 1 nA IOLeak 2 V 0.8 Output leakage in shutdown SHDN = VCCmode Tmin < Top < 125° C Doc ID 15688 Rev 2 V 9/26 Electrical characteristics TSV63x Figure 2. Supply current vs. supply voltage at Vicm = VCC/2 Figure 4. Output current vs. output voltage at Figure 5. VCC = 5 V Figure 3. Output current vs. output voltage at VCC = 1.5 V Voltage gain and phase vs. frequency at VCC = 1.5 V Ω Figure 6. 10/26 Voltage gain and phase vs. frequency at VCC = 5 V Figure 7. Doc ID 15688 Rev 2 Phase margin vs. output current at VCC = 5 V TSV63x Figure 8. Electrical characteristics Positive slew rate vs. time Figure 9. Negative slew rate vs. time Figure 10. Positive slew rate vs. supply voltage Figure 11. Negative slew rate vs. supply voltage Figure 12. Distortion + noise vs. output voltage Figure 13. Distortion + noise vs. frequency 1 Vcc=1.5V Rl=2kΩ Vcc=1.5V Rl=100kΩ THD + N (%) THD + N (%) Vcc=1.5V Rl=2kΩ f=1kHz Gain=1 BW=22kHz Vicm=Vcc/2 Vcc=5.5V Rl=2kΩ 0.1 Vcc=1.5V Rl=100kΩ 0.01 Ω Vcc=5.5V Rl=100kΩ Output Voltage (Vpp) Ω 1E-3 10 Doc ID 15688 Rev 2 100 1000 10000 100000 11/26 Electrical characteristics TSV63x Figure 15. EMIRR vs. frequency at Vcc = 5 V, T = 25° C 300 120 Vcc=5V Tamb=25 C 250 100 200 EMIRR Vpeak (dB) Equivalent Input Voltage Noise (nV/VHz) Figure 14. Noise vs. frequency Vicm=2.5V 150 100 60 40 Vicm=4.5V 20 50 0 12/26 80 100 1000 10000 Doc ID 15688 Rev 2 0 1 10 2 10 3 10 TSV63x Application information 4 Application information 4.1 Operating voltages The TSV63x can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8-, 3.3and 5-V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV63x characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40° C to +125° C. 4.2 Rail-to-rail input The TSV63x are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from VCC-- 0.1 V to VCC+ + 0.1 V. The transition between the two pairs appears at VCC+ - 0.7 V. In the transition region, the performance of CMRR, PSRR, Vio (Figure 16 and Figure 17) and THD is slightly degraded. Figure 16. Input offset voltage vs input common mode at VCC = 1.5 V Figure 17. Input offset voltage vs input common mode at VCC = 5 V The devices are guaranteed without phase reversal. 4.3 Rail-to-rail output The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to VCC/2. 4.4 Shutdown function (TSV633 - TSV635) The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the amplifiers, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. Doc ID 15688 Rev 2 13/26 Application information TSV63x The turn-on and turn-off times are calculated for an output variation of ±200 mV (Figure 18 and Figure 19 show the test configurations). Vcc-0.5V + DUT - +Vcc GND 2KO +Vcc Figure 19. Test configuration for turn-off time (Vout pulled down) Vcc-0.5V GND + DUT - GND 2KO Figure 18. Test configuration for turn-on time (Vout pulled down) GND Figure 20. Turn-on time, VCC = 5 V, Vout pulled down, T = 25° C Figure 21. Turn-off time, VCC = 5 V, Vout pulled down, T = 25° C Shutdown pulse Output voltage (V) Vcc = 5V T = 25°C Voltage (V) Vout Vout Vcc = 5V T = 25 C RL connected to GND Time( s) Time( s) 14/26 Shutdown pulse Doc ID 15688 Rev 2 TSV63x 4.5 Application information Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR and AVd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and SR = 0.25 V/µs minimum). 4.6 Driving resistive and capacitive loads These products are micro-power, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 2 kΩ. For lower resistive loads, the THD level may significantly increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding an in-series resistor at the output can improve the stability of the devices (see Figure 22 for recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on bench and simulated with the simulation model. Figure 22. In-series resistor vs. capacitive load 4.7 PCB layouts For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins. Doc ID 15688 Rev 2 15/26 Application information 4.8 TSV63x Macromodel Two accurate macromodels (with or without shutdown feature) of the TSV63x is available on STMicroelectronics’ web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It also helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements. 16/26 Doc ID 15688 Rev 2 TSV63x 5 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 15688 Rev 2 17/26 Package information 5.1 TSV63x SOT23-8 package information Figure 23. SOT23-8 package mechanical drawing Table 8. SOT23-8 package mechanical data Dimensions Ref. Millimeters Min. 18/26 Typ. Inches Max. Min. Typ. Max. A 1.45 0.057 A1 0.15 0.006 A2 0.90 1.30 0.035 0.051 b 0.22 0.38 0.009 0.015 c 0.08 0.22 0.003 0.009 D 2.80 3 0.110 0.118 E 2.60 3 0.102 0.118 E1 1.50 1.75 0.059 0.069 e 0.65 0.026 e1 1.95 0.077 L 0.30 0.60 < 0° 8° Doc ID 15688 Rev 2 0.012 0.024 TSV63x 5.2 Package information SO-8 package information Figure 24. SO-8 package mechanical drawing Table 9. SO-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.75 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.25 Max. 0.004 0.010 0.049 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 L1 k ccc 1.04 0 0.040 8° 0.10 Doc ID 15688 Rev 2 1° 8° 0.004 19/26 Package information 5.3 TSV63x MiniSO-8 package information Figure 25. MiniSO-8 package mechanical drawing Table 10. MiniSO-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.1 A1 0 A2 0.75 b Max. 0.043 0.15 0 0.95 0.030 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 e L 0.85 0.65 0.40 0.60 0.006 0.033 0.80 0.016 0.024 0.95 0.037 L2 0.25 0.010 ccc 0° 0.037 0.026 L1 k 20/26 Inches 8° 0.10 Doc ID 15688 Rev 2 0° 0.031 8° 0.004 TSV63x 5.4 Package information MiniSO-10 package information Figure 26. MiniSO-10 package mechanical drawing Table 11. MiniSO-10 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.10 Max. 0.043 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.78 0.86 0.94 0.031 0.034 0.037 b 0.25 0.33 0.40 0.010 0.013 0.016 c 0.15 0.23 0.30 0.006 0.009 0.012 D 2.90 3.00 3.10 0.114 0.118 0.122 E 4.75 4.90 5.05 0.187 0.193 0.199 E1 2.90 3.00 3.10 0.114 0.118 0.122 e L 0.50 0.40 L1 k aaa 0.55 0.020 0.70 0.016 0.95 0° 3° 0.022 0.028 0.037 6° 0.10 Doc ID 15688 Rev 2 0° 3° 6° 0.004 21/26 Package information 5.5 TSV63x TSSOP14 package information Figure 27. TSSOP14 package mechanical drawing Table 12. TSSOP14 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e L k aaa 1.00 0.65 0.45 L1 22/26 Inches 0.60 0.0256 0.75 0.018 1.00 0° 0.024 0.030 0.039 8° 0.10 Doc ID 15688 Rev 2 0° 8° 0.004 TSV63x 5.6 Package information TSSOP16 package information Figure 28. TSSOP16 package mechanical drawing b Table 13. TSSOP16 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.20 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 k 0° L 0.45 L1 aaa 1.00 0.60 0.006 0.039 0.041 0.0256 8° 0° 0.75 0.018 1.00 8° 0.024 0.030 0.039 0.10 Doc ID 15688 Rev 2 0.004 23/26 Ordering information 6 TSV63x Ordering information Table 14. Order codes Order code Temperature range Package Packing SO-8 Tube and tape & reel TSV632ID/DT TSV632 TSV632AID/DT TV632A TSV632IST K110 MiniSO-8 Tape & reel TSV632AIST K145 TSV632ILT TSV633IST SOT23-8 Tape & reel MiniSO-10 Tape & reel -40° C to +125° C K110 K111 TSV633AIST K146 TSV634IPT TSV634 TSSOP-14 Tape & reel TSV634AIPT TSV634A TSV635IPT TSV635 TSSOP-16 TSV635AIPT 24/26 Marking Tape & reel TSV635A Doc ID 15688 Rev 2 TSV63x 7 Revision history Revision history Table 15. Document revision history Date Revision Changes 25-May-2009 1 Initial release. 15-Jun-2009 2 Corrected pin connection diagram in Figure 1. Doc ID 15688 Rev 2 25/26 TSV63x Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 26/26 Doc ID 15688 Rev 2