Ordering number : ENN7287 2SC5832 NPN Epitaxial Planar Silicon Transistor 2SC5832 Driver Applications Applications • Package Dimensions Suitable for use in switching of inductive load (motor drivers, printer hammer drivers, relay drivers). unit : mm 2045B [2SC5832] 1.5 5.5 1.2 7.5 0.8 1.6 0.85 0.7 0.6 0.5 1 2 1 : Base 2 : Collector 3 : Emitter 4 : Collector 3 2.3 2.3 SANYO : TP unit : mm 2044B [2SC5832] 6.5 5.0 4 2.3 1.5 0.5 0.5 0.85 1 0.6 2.3 2 1.2 • 0.5 7.0 • 5.5 • 2.3 2.5 • High DC current gain. Wide ASO. On-chip zener diode of 65±10V between collector and base. Uniformity in collector-to-base voltage. Large inductive load handling capability. 0.8 • 6.5 5.0 4 7.0 Features 3 1.2 0 to 0.2 2.3 1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP-FA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN GI IM No.7287-1/4 13003 TS IM TA-3670 2SC5832 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO On-chip zener diode(65±10V) 55 Collector-to-Emitter Voltage VCEO On-chip zener diode(65±10V) 55 V Emitter-to-Base Voltage VEBO 6 V IC ICP 2 A Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C V 4 A 1.0 W 10 W 150 °C −55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO Emitter Cutoff Current IEBO hFE DC Current Gain Gain-Bandwidth Product VCE=5V, IC=1A VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Fall Time µA 2 mA 180 MHz mJ 1.0 1.5 V 2.0 V 55 65 75 V 55 65 75 V See specified Test Circuit. 0.2 µs See specified Test Circuit. 3.5 µs See specified Test Circuit. 0.5 µs Switching Time Test Circuit Es / b Test Circuit PW=50µs, Duty Cycle≤1% IB1= --IB2=4mA VCC=20V, RBE=100Ω OUTPUT L TUT +VCC TUT SW RB INPUT 10 25 IC=100µA, IE=0 IC=1mA, RBE=∞ ton tstg tf Storage Time Unit max 4000 IC=1A, IB=4mA IC=1A, IB=4mA V(BR)CBO V(BR)CEO Turn-ON Time 1000 L=100mH, RBE=100Ω Collector-to-Emitter Saturation Voltage Collector-to-Emitter Breakdown Voltage typ VCE=5V, IC=1A Es / b Collector-to-Base Breakdown Voltage min VCB=40V, IE=0 VEB=5V, IC=0 fT Inductive Load Ratings Conditions RL 20Ω VR 50Ω + 100µF IB RBE 10kΩ 300Ω + 470µF VBB= --5V VCC=20V IC=250A, IB1= --250A, IB2=1A IC -- VCE µA 1000 2.0 1.2 450µ 0µA Collector Current, IC -- A A A 3 0µ A 40 50 250µA 200µA 0.8 150µA 0.4 1.6 1.2 0.8 --40°C 300µ 50µA 1.6 VCE=5V 25°C 1 20 Collector Current, IC -- A µA 0°C 00 0 50 IC -- VBE 2.4 Ta=1 2 µA 2.0 0.4 IB=0 0 0 1 2 3 4 Collector-to-Emitter Voltage, VCE -- V 0 5 ITR06005 0 0.4 0.8 1.2 1.6 2.0 Base-to-Emitter Voltage, VBE -- V 2.4 2.8 ITR06006 No.7287-2/4 2SC5832 hFE -- IC 3 DC Current Gain, hFE 10000 7 5 °C 20 1 = Ta 3 C 25° 2 1000 7 5 C 40° -- 3 2 f=1MHz 7 Output Capacitance, Cob -- pF 2 Cob -- VCB 1000 VCE=5V 5 3 2 100 7 5 3 2 100 7 5 3 5 7 2 0.1 3 5 7 2 1.0 Collector Current, IC -- A 3 10 0.1 5 2 3 5 7 10 2 3 5 ITR06008 VBE(sat) -- IC IC / IB=250 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 7 1.0 10 IC / IB=250 7 5 3 2 0°C Ta= --4 25°C 1.0 7 120°C 5 3 0.1 2 3 5 7 2 1.0 3 Collector Current, IC -- A 3 Ta= --40°C 2 25°C 1.0 120°C 7 5 3 7 5 5 ITR06010 ICP=4A 3 Collector Current, IC -- A 1.0 3 10µs IC=2A 1.0 7 5 Ta = 10 ms Tc DC =25° op C era tio n 25 °C , 3 DC 2 s 0µ ms 1 J 2 1.0 10 25m 7 ASO 7 5 2 3 5 Collector Current, IC -- A 5 2 2 IT04364 RBE=100Ω Tc=25°C 7 5 3 0.1 5 IC -- L 10 Collector Current, IC -- A 3 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC 10 2 ITR06007 op era tio n 0.1 7 5 3 2 3 0.01 0.1 2 2 3 5 7 2 10 3 5 7 100 L -- mH 2 3 Collector Dissipation, PC -- W Collector Dissipation, PC -- W 1.0 0.8 he at 0.6 5 sin k 0.4 0.2 7 1.0 2 3 5 7 10 2 3 5 7 IT04365 PC -- Tc 12 1.2 No 3 Collector-to-Emitter Voltage, VCE -- V PC -- Ta 1.4 2 ITR06011 10 8 6 4 2 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04366 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT05327 No.7287-3/4 2SC5832 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2003. Specifications and information herein are subject to change without notice. PS No.7287-4/4