MCC 94 MCD 94 High Voltage Thyristor Module High Voltage Thyristor/Diode Modules VRSM VDSM VRRM VDRM V V 2100 2300 2000 2200 TO-240 AA Type MCC 94-20io1 B MCC 94-22io1 B ITRMS ITAVM TVJ = TVJM TC = 85°C; 180° sine ITSM TVJ = 45°C; VR = 0 (dv/dt)cr PGM Maximum Ratings 180 104 A A t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1700 1800 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1540 1640 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 14450 13500 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 11850 11300 A2s A2s 150 A/ms 500 A/ms 1000 V/ms TVJ = TVJM repetitive, IT = 250 A f = 50 Hz, tP = 200 ms VD = 2/3 VDRM IG = 0.45 A, non repetitive, IT = ITAVM diG/dt = 0.45 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM Md Weight 4 5 t = 1 min t=1s Mounting torque (M5) Terminal connection torque (M5) Typical including screws ● ● ● -40 ...125 125 -40 ...125 °C °C °C 3000 3600 V~ V~ Nm/lb.in. Nm/lb.in. g 3 1 5 4 2 International standard package, JEDEC TO-240 AA Direct Copper Bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Gate-cathode twin pins for version 1B Applications ● ● ● DC motor control Softstart AC motor controller Light, heat and temperature control Advantages ● ● 2.5-4.0/22-35 2.5-4.0/22-35 90 5 4 2 Features ● W W W V 6 7 1 MCD ● 10 5 0.5 10 3 MCC ● tP = 30 ms tP = 300 ms TVJ TVJM Tstg 50/60 Hz, RMS IISOL £ 1 mA 7 MCD 94-20io1 B MCD 94-22io1 B PGAV VRGM VISOL 6 1 Test Conditions (di/dt)cr 3 2 Symbol òi2dt ITRMS = 2x 180 A ITAVM = 2x 104 A VRRM = 2000-2200 V ● ● Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits 839 Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved 1-2 MCC 94 MCD 94 Symbol Test Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM VT IT VT0 rT Characteristic Values 15 = 300 A; TVJ = 25°C V For power-loss calculations only (TVJ = TVJM) 0.85 3.2 V mW VGT VD = 6 V; IGT VD = 6 V; 1.5 1.6 100 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM 0.25 10 V mA IL TVJ = 25°C; VD = 6 V; tP = 30 ms diG/dt = 0.45 A/ms; IG = 0.45 A 200 mA = 25°C = -40°C = 25°C = -40°C TVJ = 25°C; VD = 6 V; RGK = ¥ 150 mA tgd TVJ = 25°C; VD = 1/2 VDRM diG/dt = 0.45 A/ms; IG = 0.45 A 2 ms tq TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 ms dv/dt = 20 V/ms; IT = 150 A; -di/dt = 10 A/ms 185 ms QS IRM TVJ = TVJM -di/dt = 6 A/ms; IT = 50 A 170 45 mC A RthJC per thyristor; DC current per module per thyristor; DC current per module 0.22 0.11 0.42 0.21 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Maximum allowable acceleration 12.7 9.6 50 mm mm m/s2 dS dA a 2: IGT, TVJ = 25°C V 3: IGT, TVJ = -40°C VG 3 2 1 5 6 1 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125°C IH RthJK 1: IGT, TVJ = 125°C mA 1.74 TVJ TVJ TVJ TVJ 10 0.1 100 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 1 Gate trigger characteristics typ. 1000 TVJ = 25°C µs tgd typ. Limit 100 10 Optional accessories for module-type MCC 94 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA 100 1000 IG Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") RthJC for various conduction angles d: d RthJC (K/W) DC 180° 120° 60° 30° 0.22 0.23 0.25 0.27 0.28 d DC 180° 120° 60° 30° Constants for ZthJC calculation: i 1 2 3 © 2000 IXYS All rights reserved RthJK for various conduction angles d: Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.0019 0.0477 0.344 RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.2 0.0019 0.0477 0.344 1.32 2-2