DATA SHEET PNP SILICON POWER TRANSISTOR 2SB772 PNP SILICON POWER TRANSISTOR DESCRIPTION PACKAGE DRAWING (Unit: mm) The 2SB772 is PNP silicon transistor suited for the output stage of 3 W audio amplifier, voltage regulator, DC-DC converter and relay driver. 8.5 MAX. 3.2 ±0.2 2.8 MAX. FEATURES 2.5 ±0.2 12 TYP. Maximum Temperature Storage Temperature −55 to +150°C Junction Temperature 150°C Maximum Maximum Power Dissipation 1.0 W Total Power Dissipation (TA = 25°C) 10 W Total Power Dissipation (TC = 25°C) Maximum Voltages and Currents (TA = 25°C) Collector to Base Voltage −40 V VCBO Collector to Emitter Voltage −30 V VCEO Emitter to Base Voltage −5.0 V VEBO Collector Current (DC) −3.0 A IC(DC) IC(pulse)Note Collector Current (pulse) −7.0 A Note Pulse Test PW ≤ 350 µs, Duty Cycle ≤ 2% 13.0 MIN. ABSOLUTE MAXIMUM RATINGS 12.0 MAX. 3.8 ±0.2 • Low saturation voltage VCE(sat) ≤ −0.5 V (IC = −2 A, IB = −0.2 A) • Excellent hFE linearity and high hFE hFE = 60 to 400 (VCE = −2 V, IC = −1 A) • Less cramping space required due to small and thin package and reducing the trouble for attachment to a radiator. No insulator bushing required. 0.55 +0.08 –0.05 0.8 +0.08 –0.05 1.2 TYP. 2.3 TYP. 2.3 TYP. 1: Emitter 2: Collector: connected to mounting plane 3: Base ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTIC SYMBOL TEST CONDITIONS Note DC Current Gain hFE1 VCE = −2.0 V, IC = −20 mA DC Current Gain hFE2 VCE = −2.0 V, IC = −1.0 mA Gain Bandwidth Product fT Note 60 160 55 VCB = −10 V, IE = 0, f = 1.0 MHz Collector Cutoff Current ICBO VCB = −30 V, IE = 0 A Base Saturation Voltage 220 80 Cob Collector Saturation Voltage TYP. 30 VCE = −5.0 V, IC = −0.1 A Output Capacitance Emitter Cutoff Current MIN. MAX. UNIT 400 MHz pF IEBO VEB = −3.0 V, IC = 0 A −1.0 µA µA VCE(sat) IC = −2.0 A, IB = −0.2 A Note −0.3 −0.5 V IC = −2.0 A, IB = −0.2 A Note −1.0 −2.0 V VBE(sat) −1.0 Note Pulse Test: PW ≤ 350 µs, Duty Cycle ≤ 2% CLASSIFICATION OF hFE Rank R Q P E Range 60 to 120 100 to 200 160 to 320 200 to 400 Remark Test Conditions: VCE = −2.0 V, IC = 1.0 A The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D17118EJ2V0DS00 (2nd edition) (Previous No. TC-3569) Date Published March 2004 N CP(K) Printed in Japan The mark shows major revised points. c 2004 2SB772 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise noted.) PT ∆Rth VCE IC TC TA IC(pulse) 50% VCE IC(DC) hFE hFE VBE IB VRF IC IC TC = 25°C VCE VCE IC IC = 10 A • IB VCE IE = 0 A (Cob) IC = 0 A (Cib) VBE(sat) Cib Cob t) (sa fT VBE(sat) VCE(sat) Cib Cob VCE IC 2 IC Data Sheet D17118EJ2V0DS VCB VEB 2SB772 • The information in this document is current as of March, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1