DATA SHEET SILICON POWER TRANSISTOR 2SD2165 NPN SILICON EPITAXIAL TRANSISTOR FOR LOW-FREQUENCY POWER AMPLIFIERS AND LOW-SPEED SWITCHING The 2SD2165 is a single power transistor developed especially PACKAGE DRAWING (UNIT: mm) for high hFE. This transistor is ideal for simplifying drive circuits and reducing power dissipation because its hFE is as high as that of Darlington transistors, but it is a single transistor. In addition, this transistor features a small resin-molded insulation package, thus contributing to high-density mounting and mounting cost reduction. FEATURES • High hFE and low VCE(sat): hFE ≅ 1,300 TYP. (VCE = 5.0 V, IC = 1.0 A) VCE(SAT) ≅ 0.3 V TYP. (IC = 3.0 A, IB = 30 mA) • Mold package that does not require an insulating board or insulation bushing ABSOLUTE MAXIMUM RATINGS (TA = 25°°C) Electrode Connection 1. Base Parameter Symbol Ratings Unit Collector to base voltage VCBO 100 V Collector to emitter voltage VCEO 100 V Emitter to base voltage VEBO 7.0 V Collector current (DC) IC(DC) 6.0 A Collector current (pulse) Base current (DC) IC(pulse) Note 10 2. Collector 3. Emitter A IB(DC) 1.0 A Total power dissipation PT (TC = 25°C) 30 W Total power dissipation PT (TA = 25°C) 2.0 W Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Note PW ≤ 300 µs, duty cycle ≤ 10% The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D13178EJ2V0DS00 (2nd edition) Date Published April 2002 N CP(K) Printed in Japan © 2002 1998 2SD2165 ELECTRICAL CHARACTERISTICS (TA = 25°°C) Parameter Symbol Conditions Collector cutoff current ICBO VCB = 60 V, IE = 0 A Emitter cutoff current IEBO VEB = 7.0 V, IC = 0 A DC current gain hFE1 DC current gain hFE2 TYP. VCE = 5.0 V, IC = 1.0 A Note 800 1,300 VCE = 5.0 V, IC = 3.0 A Note 500 1,000 MAX. Unit 10 µA 10 µA 3,200 VCE(sat) IC = 3.0 A, IB = 30 mANote Base saturation voltage VBE(sat) IC = 3.0 A, IB = 30 mA Note Gain bandwidth product fT VCE = 5.0 V, IC = 0.1 A 110 MHz VCB = 10 V, IE = 0 A, f = 1.0 MHz 50 pF Collector saturation voltage Collector capacitance Cob Note Pulse test PW ≤ 350 µs, duty cycle ≤ 2% hFE1 CLASSIFICATION 2 MIN. Marking M L K hFE1 800 to 1,600 1,000 to 2,000 1,600 to 3,200 Data Sheet D13178EJ2V0DS 0.3 0.5 V 1.2 V 2SD2165 Derating dT (%) Total Power Dissipation PT (W) TYPICAL CHARACTERISTICS (TA = 25°°C) Case Temperature TC (°C) Case Temperature TC (°C) Collector Current IC (A) Single pulse Transient Thermal Resistance r(t) (°C/W) Collector to Emitter Voltage VCE (V) Without heatsink With infinite heatsink Pulse Width PW (s) Data Sheet D13178EJ2V0DS 3 2SD2165 DC Current Gain hFE Collector Current IC (A) Pulse test Collector Current IC (A) Gain Bandwidth Product fT (MHz) Base Saturation Voltage VBE(sat) (V) Collector Saturation Voltage VCE(sat) (V) Collector to Emitter Voltage VCE (V) Collector Current IC (A) Collector Capacitance Cob (pF) Collector Current IC (A) Collector to Base Voltage VCB (V) 4 Data Sheet D13178EJ2V0DS 2SD2165 [MEMO] Data Sheet D13178EJ2V0DS 5 2SD2165 • The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4