SPECIFICATION CONTROL DRAWING Product Revisions Part Names D-150-0228 D-150-0229 D-150-0230 D-150-0231 D-150-0232 D-150-0233 D-150-0234 D-150-0235 D-150-0236 D-150-0237 D-150-0238 A B B A A B B A A A A Primary No. AWG Range Color Code L Max 1 1 1 2 2 2 2 3/4 3/4 3/4 3/4 26-20 20-16 16-12 26-20 18-16 14 12 26-20 22-20 18-16 14-12 Red Blue Yellow Red Blue Yellow Yellow Red Red Blue Yellow 80.52 (3.170) 80.52 (3.170) 80.52 (3.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) Product Dimensions øD1 A2.54 (0.100) 50.30 (1.970) 3.00 (0.118) 50.30 (1.970) 4.00 (0.157) 50.30 (1.970) 5.00 (0.197) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) øD2 øD3 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 2.46 (0.097) 1.14 (0.045) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 2.79 (0.110) 4.00 (0.157) 4.32 (0.170) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) 4.32 (0.170) 2.16 (0.085) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Transparent blue. SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Nickel-plated copper alloy. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings. Transparent blue. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and insulations rated for 135C minimum. 2. Temperature rating: -55C to +150C. 3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-02. TE Connectivity 305 Constitutional Drive Menlo Park, CA 94025 USA RAYCHEM Products Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this 0.00 N/A drawing at any time. Users should evaluate the 0.0 N/A ROUGHNESS IN suitability of the product for their application. 0 N/A MICRON DRAWN BY: REPLACES: DCR NUMBER: M. FORONDA D000671 D010337 (1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE 26 THRU 12 AWG, Ni PLATED, 1 TO 4 CONDUCTORS TITLE : DOCUMENT NO.: D-150-0228/-0238 DATE: DOC ISSUE: 15-Apr-11 PROD. REV. SEE TABLE Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. 7 SCALE: None SIZE: SHEET: A 1 of 1