SEME 2N2484 LAB NPN SILICON AMPLIFIER TRANSISTOR MECHANICAL DATA Dimensions in mm (inches) 5.84 (0.230) 5.31 (0.209) FEATURES 4.95 (0.195) 4.52 (0.178) 12.7 (0.500) min. 5.33 (0.210) 4.32 (0.170) • SILICON PLANAR EPITAXIAL NPN TRANSISTOR 0.48 (0.019) 0.41 (0.016) dia. 2.54 (0.100) Nom. 3 1 2 TO18 PIN 1 = Emitter PIN 2 = Base PIN 3 = Collector ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) VCBO Collector – Base Voltage 60V VCEO Collector – Emitter Voltage 60V VEBO Emitter – Base Voltage 6V IC Collector Current Continuous PD Total Device Dissipation @ TA =25°C Derate above 25°C PD Total Device Dissipation @ TC =25°C Derate above 25°C TSTG , TJ Operating and Storage Temperature Range 50mA 360mW 2.06mW / °C 1.2W 6.85mW / °C –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document. 2359 Issue 1 SEME 2N2484 LAB ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter OFF CHARACTERISTICS V(BR)CBO* Collector – Base Breakdown Voltage Test Conditions Min. Typ. Max. Unit IC = 10mA IB = 0 60 V(BR)CEO Collector – Emitter Breakdown Voltage IC = 10mA 60 V(BR)EBO Emitter – Base Breakdown Voltage IE = 10mA IE = 0 IC = 0 6 ICBO Collector Cut-off Current VCB = 45V IE = 0 10 TA = 150°C 10 mA IEBO Emitter Cut-off Current IC = 0 10 nA 0.25 0.35 V 0.7 V VBE = 5V V nA ON CHARACTERISTICS VCE(sat) Collector – Emitter Saturation Voltage IC = 1mA IB = 0.1mA VBE(on) Base – Emitter On Voltage VCE = 5V 0.5 0.65 VCE = 5V 30 190 VCE = 5V 100 250 TA = 55°C 20 40 VCE = 5V 175 275 VCE = 5V 200 300 IC = 1mA VCE = 5V 250 350 IC = 10mA VCE = 5V IC = 0.05mA VCE = 5V IC = 0.1mA IC = 1mA IC = 10mA hFE DC Current Gain IC = 100mA IC = 500mA 400 500 — 800 SMALL SIGNAL CHARACTERISTICS fT Current Gain Bandwidth Product f = 5MHz IC = 0.05mA VCE = 5V f = 30MHz 15 50 MHz 60 100 Cobo Output Capacitance VCB = 5V IE = 0 3 6 Cibo Input Capacitance f = 140KHz IC = 0.5mA 4 6 hie Input Impedance hre Voltage Feedback Ratio IC = 1.0mA hfe Small Signal Current Gain f = 1.0KHz hoe Small Signal Current Gain 3.5 VCE = 5V 150 pF 24 kW 800 x 10-6 900 — 40 mmhos Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document. 2359 Issue 1 SEME 2N2484 LAB ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter SMALL SIGNAL CHARACTERISTICS Test Conditions IC = 10mA RS = 10KW Min. Typ. Max. Unit VCE = 5V f = 100Hz 8.0 10 BW = 20Hz IC = 10mA RS = 10KW NF Noise Figure VCE = 5V 3.0 f = 1.0kHz BW = 200Hz IC = 10mA RS = 10KW dB VCE = 5V f = 10kHz 2.0 BW = 2.0kHz IC = 10mA RS = 10KW VCE = 5V 3.0 f = 10Hz to 15.7kHz BW = 15.7kHz THERMAL CHARACTERISTICS Parameter Test Conditions Min. Typ. Max. Unit RqJC Thermal Resistance, Junction to Case 146 RqJA(1) Thermal Resistance, Junction to Case 485 TL Lead Temperature 1/16 from Case for 10 seconds 300 °C/W °C * Pulse Test: tp £ 300ms, d £ 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document. 2359 Issue 1